Introduction
Thank you for choosing the 21V Cordless Power Washer Gun. This portable pressure cleaner is designed for versatile cleaning tasks around your car, bike, yard, and home. Its cordless design and multiple water supply methods offer unparalleled convenience and flexibility. Please read this manual thoroughly before operation to ensure safe and efficient use of the product.
Safety Information
Always follow basic safety precautions when using this product to reduce the risk of injury, electric shock, or fire.
- Keep the work area clean and well-lit.
- Do not operate the power washer in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating the power washer.
- Wear appropriate personal protective equipment, including safety glasses, gloves, and hearing protection.
- Do not direct the water jet at people, animals, or electrical equipment.
- Ensure all connections are secure before starting the unit.
- Do not use the power washer if the power cord or battery is damaged.
- Store the power washer in a dry, secure place, out of reach of children.
Package Contents
Please check the package to ensure all items are present and undamaged:
- 1x Cordless Pressure Washer Host
- 1x 21Volt 3.0Ah Lithium-Ion Battery (or 2x depending on variant)
- 1x Charger
- 1x Extension Rod
- 1x Foam Pot
- 1x Filter Screen
- 1x 25CM Water Pipe
- 1x 5M Water Hose
- 1x Quick Connector
- 1x 6-in-1 Nozzle
- 1x User Manual

Product Overview
Familiarize yourself with the main parts of your cordless pressure washer:

- Multifunctional Nozzle Head: Adjustable for various spray patterns.
- Main Engine: Houses the brushless motor and pump.
- Water Inlet Quick Connector: For attaching the water hose.
- Switch: Power on/off and trigger for water flow.
- Battery Pack: Provides cordless power to the unit.
Specifications
| Feature | Specification |
|---|---|
| Water Flow | 270 L/H |
| Working Pressure | 200 BAR / 3000 PSI |
| Charging Time | Approx. 1.5H - 3H |
| Power | 3000W |
| Voltage | 21V |
| Battery Capacity | 3.0Ah Lithium-Ion |
| Motor Type | Brushless |
| Nozzle Material | Copper |
| Interface Material | Copper |
| Working Time | 30-45 minutes |
| No-Load Speed | 25000 RPM |
| Hose Length | 5 meters (16.4 ft) |
| Jet Distance | 5-10 meters |


Setup
- Charge the Battery: Before first use, fully charge the 21V Lithium-Ion battery using the provided charger. The charging time is approximately 1.5 to 3 hours.
- Install the Battery: Slide the charged battery pack into the slot at the bottom of the power washer gun until it clicks securely into place.
- Attach the Extension Rod and Nozzle: Connect the extension rod to the main engine. Then, attach the 6-in-1 nozzle to the end of the extension rod. Ensure both connections are firm.
- Connect Water Source: The power washer supports three water supply methods:
- Water Bottle: Attach the quick connector to a standard water bottle. Insert the water pipe into the bottle and connect the quick connector to the power washer's water inlet.
- Bucket/Container: Place the filter screen end of the 5M water hose into a bucket or container filled with water. Connect the other end of the hose to the power washer's water inlet using the quick connector.
- Lake/Pond: Similar to the bucket method, submerge the filter screen end of the 5M water hose into the lake or pond.


Operating Instructions
- Power On: Press the power switch to turn on the unit.
- Adjust Nozzle: The 6-in-1 adjustable nozzle allows you to select different spray patterns by rotating the nozzle head. The available modes are:
- 0° (Direct Jet)
- 15° (Narrow Fan)
- 25° (Medium Fan)
- 40° (Wide Fan)
- Foam (for foam pot attachment)
- Shower (for gentle rinsing or watering)
- Start Cleaning: Aim the nozzle at the surface to be cleaned and press the trigger. Release the trigger to stop the water flow.
- Using the Foam Pot: For car washing or applying cleaning solutions, attach the foam pot to the nozzle head. Fill the foam pot with appropriate cleaning solution and water. Select the 'Foam' mode on the nozzle.



Applications:
- Car Washing: Use foam mode for applying soap, then switch to a fan spray (e.g., 25° or 40°) for rinsing.
- Garden Watering: The 'Shower' mode is ideal for gently watering plants.
- Floor/Patio Cleaning: Use a direct jet (0°) or narrow fan (15°) for stubborn dirt, and wider sprays for general cleaning.
- Furniture Cleaning: Adjust the spray to a suitable fan pattern to clean outdoor furniture without damage.

Maintenance
- Clean the Filter Screen: Regularly check and clean the filter screen at the end of the water hose to prevent blockages and prolong the service life of the pump. Remove any debris like sand, gravel, or withered leaves.
- Rinse After Use: After each use, especially when using cleaning solutions, run clean water through the power washer for a few minutes to flush out any chemical residues.
- Battery Care:
- Always store the battery in a cool, dry place.
- Do not expose the battery to extreme temperatures.
- If storing for extended periods, charge the battery to about 50% and recharge every few months.
- Storage: Disconnect all hoses and attachments. Drain any remaining water from the unit. Store the power washer and accessories in a dry, frost-free environment.

Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or low pressure | Clogged filter screen Insufficient water supply Air in the pump Battery low | Clean the filter screen. Ensure water source is adequate. Run unit without nozzle until steady water flow, then attach nozzle. Recharge battery. |
| Unit does not start | Battery not installed correctly Battery discharged Power switch off | Re-insert battery until it clicks. Charge the battery. Ensure power switch is ON. |
| Water leaks from connections | Loose connections Damaged O-rings | Tighten all connections. Inspect and replace O-rings if damaged. |
User Tips
Based on general user feedback for similar products, here are some tips:
- For optimal performance, ensure your battery is fully charged before starting any major cleaning task.
- Always use the filter screen to protect the pump from debris, especially when drawing water from natural sources like lakes or ponds.
- Experiment with the different nozzle settings to find the most effective spray pattern for each cleaning job. The 0° jet is powerful but should be used with caution on delicate surfaces.
- When washing vehicles, pre-soak the surface with water and then apply foam for best results.
No specific user tips or FAQs were available from the provided reviews or Q&A data.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.