1. Safety Information
SAFETY IS ALWAYS THE FIRST PRIORITY!
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the safety of others, and to avoid any damage to the product and your vehicle, CAREFULLY READ AND MAKE SURE YOU FULLY UNDERSTAND ALL THE SAFETY INSTRUCTIONS AND MESSAGES IN THIS MANUAL BEFORE OPERATING. You must also read the vehicle's service manual, and observe the stated precautions or instructions before and during any test or service procedure.
Keep yourself, your clothing and other objects away from moving or hot engine parts and avoid contact with electrical connections.
ONLY OPERATE THE VEHICLE IN A WELL-VENTILATED AREA, as the vehicle produces carbon monoxide, a toxic and poisonous gas, and particulate matter when the engine is running.
ALWAYS WEAR approved SAFETY GOGGLES to prevent damage from sharp objects and caustic liquids.
DO NOT SMOKE OR HAVE ANY FLAMES NEAR THE VEHICLE when testing. The fuel and battery vapors are highly flammable.
DO NOT ATTEMPT TO INTERACT WITH THE PRODUCT WHILE DRIVING. Any distraction may cause an accident.
TURN THE IGNITION OFF BEFORE CONNECTING OR DISCONNECTING THE PRODUCT FROM THE VEHICLE'S DATA LINK CONNECTOR (DLC) to prevent causing damage to the product or vehicle's electronic components.
2. What's in the Box?
The ArtiDiag600S package includes the following items:
- ArtiDiag600 S unit
- OBD-II Diagnostic Cable
- USB Cable (Type-A to Type-C)
- Quick User Guide
- Carrying Case

3. Product Overview

3.1 Device Components
- Power / Screen Off Button: Long press to turn on/off or restart. Short press to wake/lock screen.
- DB15 Diagnostic Cable Connector: Connects to the vehicle's Data Link Connector (DLC).
- Five-inch Touch Screen: Main display for interaction.
- OK Button: Confirms selections or operations.
- Directional Buttons: Navigates the cursor or highlights (Up, Down, Left, Right).
- Return Button: Returns to the previous page.
- USB Type-C Charging Port: For data transfer and charging (5V, 2A).
- Audio Speaker: Provides audio feedback.




4. Getting Started
4.1 Basic Setup
Press and hold the power button for 3 seconds to turn on the ArtiDiag600 S. Follow the steps below to set up the device:
- Select Language: Choose your desired system language from the list.
- Choose Region and Time Zone: Select the appropriate region and time zone.
- Configure Wi-Fi Connection: Select a Wi-Fi network from the scanned list and enter the password.
- Log In to TOPDON Account: Log in with your existing TOPDON account. If you don't have one, please register using your email.
4.2 Connect the ArtiDiag600 S to the Vehicle's DLC
Use the supplied OBD-II diagnostic cable to connect the ArtiDiag600 S to the vehicle's DLC. The vehicle's DLC port is usually located under the dashboard. After the vehicle's DLC is properly connected to the ArtiDiag600 S, the VCI icon will change to indicate a successful connection.
Note: Make sure the ignition is always OFF before plugging in the unit.

4.3 Turn the Ignition to the "ON" Position
If your vehicle is equipped with a keyless start system and the ignition switch is an "Engine Start Stop" button, press the "Engine Start Stop" button until the car is in "ON" mode. Do not apply the brake while pressing the "Engine Start Stop" button, or you will start the car instead of putting it in the "ON" position.
The method of ignition varies by vehicle model. Refer to the vehicle's service manual for details.
You are now ready to start diagnosing the vehicle.
5. Operating - Diagnostics
5.1 Home Screen Function Icons
- Diagnostics: Performs diagnostic functions including reading/clearing Diagnostic Trouble Codes (DTCs), viewing data streams, and reading Electronic Control Unit (ECU) version information.
- OBDII/EOBD: Performs emission-related diagnostics for your vehicle.
- I/M Readiness: Provides quick access to check the status of emission-related systems.
- Maintenance: Provides 9 maintenance services including Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, Injector Coding and TPMS Reset.
- Battery Voltage: Displays the real-time voltage of your vehicle battery.
- Update: Allows you to update vehicle-specific diagnostic software.
- Folder: Accesses Reports (System Report, Fault Code Report, Data Stream Report), Live Data Rec, Screenshots and Screen Rec.
- Library: Includes OBD-II Generic DTC Repair Guide, Technical Service Bulletins, DLC Location, Warning Light Library.
- User Info: Accesses My Profile, Firmware Update, Customer Feedback, Shop Info, System Update and Settings.
5.2 Auto Scan and Individual System Diagnostics
The Diagnostics module allows you to scan supported vehicle systems (Auto Scan) for DTCs or select an individual system to perform various functions.
Identifying the Vehicle
To perform Auto Scan or Individual System Diagnostics, you need to identify your vehicle first. Tap Diagnostics from the home screen. You will see VIN and Make at the top of the Diagnostics screen.
- Auto VIN: The ArtiDiag600 S automatically reads and decodes the Vehicle Identification Number (VIN).
- Enter VIN: Manually enter the vehicle VIN to identify the vehicle.
- Identifying via Make: Tap Make, and a list of vehicle makes will display. Select or enter the make of your vehicle.
Note: Not all vehicles support automatically reading and decoding the VIN via Auto VIN. Systems may vary by vehicle make, model and year.
Auto Scan
Auto Scan detects the systems supported by the vehicle and retrieves DTCs for these systems, providing a complete health check of your vehicle. Performing Auto Scan before and after a repair could help in troubleshooting and validating repairs. Pre and post scan reports allow you to record the condition of the vehicle before and after repair for comparison.
To perform an Auto Scan, tap the Auto Scan button. The ArtiDiag600 S will start scanning the systems and retrieving DTCs automatically. Results are displayed progressively.
Read Trouble Code
After the vehicle is identified, select the system for which you wish to retrieve DTCs from the system menu. Tap Read Trouble Code in the function menu. ArtiDiag will communicate with the ECU and retrieve and display DTCs for the currently selected system.
Icons displayed with DTCs:
Tap to search on Google for more information about the DTC.
Tap to view the detailed description of the DTC.
Tap to view the freeze frame captured when the DTC occurred.
Tap to view instructive repair measures.
Clear Trouble Code
After the vehicle is identified, select the system for which you wish to clear DTCs. Tap Clear Trouble Code in the function menu, then tap OK.
Note: The procedure of clearing DTCs should be performed after the required repair has been completed. Once confirmed, DTCs and freeze data stored in the ECU will be cleared. DO NOT START UP THE ENGINE WHILE CLEARING DTCS.
Live Data
After the vehicle is identified, select the system for which you wish to read the data stream. Tap Live Data in the function menu. A data stream list displays.
Live Data options:
Tap to display real-time data stream in a wave-pattern graph.
Tap to select data streams to display.
Tap to display up to 6 data streams in a graph.
Tap to combine up to 4 data streams in one graph for easier comparison.- Record: Tap to record and save real-time data stream information. View recorded data streams in Folder > Live Data Rec.
- Report: Tap to save current data stream values in report format. View saved reports in Folder > Reports > Data Stream Report.
Note: If the vehicle must be driven to view the live data stream, always have a second person helping you. Do not watch the data stream while driving.
Read Version Information
After the vehicle is identified, select the system for which you wish to view the ECU version information. Tap Information in the function menu.
OBDII / EOBD Diagnostics
The OBDII / EOBD function allows you to perform emission-related diagnostics for your vehicle.
- Tap OBDII/EOBD from the home screen.
- Select your communication method: Auto Scan or Protocol.
- Select a function to continue. Typical options include: DTC & FFD, I/M Readiness, Live Data, On-Board Monitor, Component Test, Vehicle Information, and Vehicle Status.
Note: Depending on the vehicle make, some functions may not be available.
Diagnostic Feedback
The ArtiDiag600 S allows you to instantly send diagnostic feedback (with logs of diagnostic data automatically attached) while encountering a software problem. Tap the feedback icon on any screen, select the problem type, write a description, and tap Submit.
6. Operating - Maintenance Services
This function provides 9 maintenance services:
- Oil Reset: Resets the oil service lamp for the engine oil life system.
- Throttle Adaptation: Initializes throttle actuators after replacement or cleaning.
- EPB Reset: Replaces and resets brake pads.
- Steering Angle Reset: Finds the relative zero position for the steering angle sensor.
- BMS Reset: Resets the car battery control unit after battery replacement.
- DPF Regeneration: Regenerates diesel particulate filters by burning off captured particulates.
- ABS Bleeding: Performs tests to check ABS operating conditions and removes trapped air.
- Injector Coding: Writes new injector codes into the car system for correct cylinder injection quantity.
- TPMS Reset: Resets tire pressure information and turns off the tire pressure MIL after tire re-inflation or replacement.

6.1 Steps to Perform a Service Reset
- Tap Maintenance from the home screen.
- Select the function you want to perform.
- Identify the vehicle via VIN or Make.
- Follow the on-screen instructions to perform the service reset.
6.2 Battery Voltage
This function displays the real-time voltage of your vehicle battery.

7. Operating - Updates
This function allows you to update the vehicle-specific Diagnostics software if there is any new software available.
7.1 Performing Updates
- Tap Update from the home screen. The Update screen will display.
- Tap Download to update or download the software.
Note: You can also tap Select at the top right corner to batch select and update software.

8. Operating - Folder
This function gives access to Reports (All, System Reports, Fault Code Report, and Data Stream Reports), Live Data Rec., Screenshots and Screen Rec.
8.1 Reports
- Tap Folder > Reports.
- Select a particular report to view details.
8.2 Live Data Rec.
- Tap Folder > Live Data Rec. to view the recorded data stream list.
- Tap a particular data stream to play the recorded video.
8.3 Screenshots
Tap Folder > Screenshots to view screenshots saved during operation.
8.4 Screen Rec.
Tap Folder > Screen Rec. to view screen recordings saved during operation.
9. Operating - Library
9.1 DTC Repair Guide
The DTC Repair Guide is an experience-based database that provides code-specific information, including popular fixes and repair steps for identifying faults. To use, tap Library > DTC Repair Guide and enter a DTC in the search bar.
9.2 Technical Service Bulletins (TSBs)
To view TSBs, tap Library > Technical Service Bulletins. Select vehicle make, model, year, system, and subsystem, then tap Next. A list of OEM TSBs will display. Tap the desired bulletin to view full content.
9.3 DLC Location
To view DLC location, tap Library > DLC Location. Select vehicle make, model, and year, then tap Next. A picture of the DLC location will display.
9.4 Warning Light Library
The Warning Light Library provides information on dashboard warning lights, including descriptions, impacts on driving, typical causes, responsive measures, and relevant FAQs. To view, tap Library > Warning Light Library. A list of warning lights will display. Tap the desired warning light to view details.
10. Operating - User Info
The User Info function provides access to My Profile, Firmware Update, Customer Feedback, Shop Info, System Update and Settings.
- My Profile: Change profile photo/alias, view TOPDON ID, change password, delete account.
- Firmware Update: Update firmware if a new version is available.
- Customer Feedback: Write feedback to the TOPDON after-sales team.
- Shop Info: Save repair shop information.
- System Update: Update software if a new version is available.
- Settings: Set WLAN, time/date, languages/unit, AutoVIN, check storage, reset to factory settings, view version info, update ArtiDiag600 S, view Terms of Service/Privacy Policy, set Auto-Lock time, view tablet info, log out.
AutoVIN: When enabled, ArtiDiag600 S automatically performs AutoVIN for vehicle diagnostics once the device's VCI is connected to the vehicle's DLC. This feature is disabled by default.
11. Troubleshooting (FAQ)
- Q: What should I do if a communication error occurs?
- A: Follow these steps:
- Check if the ignition is ON.
- Check if the ArtiDiag OBD-II diagnostic cable is securely plugged into the vehicle's DLC port.
- Turn the ignition OFF, then ON again after 10 seconds, and continue the operation.
- Check if the vehicle's control module is defective.
- Q: What special functions does the ArtiDiag600 S support?
- A: The ArtiDiag600 S supports 9 maintenance services including Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, Injector Coding and TPMS Reset.
- Q: Do I need to update the firmware before using the ArtiDiag600 S for the first time?
- A: Yes. Firmware will automatically update to the latest version. You can also tap User Info > Firmware Update to update the firmware manually.
- Q: Why is the ArtiDiag600 S screen flashing when the engine is working?
- A: That is a normal occurrence caused by electromagnetic interference.
- Q: How do I capture a screenshot?
- A: Swipe down and tap Screenshot, then tap the camera icon on the screen. To view saved pictures, tap Folder > Screenshots.
- Q: Is the TOPDON ArtiDiag600S available in French?
- A: Yes, the ArtiDiag600S supports multiple languages, including French.
12. Specifications
| Feature | Specification |
|---|---|
| Display Screen | 1280*720 Touchable Screen |
| CPU | 4-Core Processor, 1.8 GHz, Android 11.0 |
| RAM | 2G |
| ROM | 32G |
| Battery | 3350 mAh/3.7 V |
| Input Voltage Range | 9-18 V |
| Working Temperature | -10℃ to 50℃ (14℉ to 122℉) |
| Storage Temperature | -20℃ to 70℃ (-4℉ to 158℉) |
| Dimension (L x W x H) | 8.9*5.3*1.56 inch (225.15*135.15*39.7 mm) |
| Net Weight | 578 g (20.39 oz) |
| Software Update Service | Lifetime Free |
| Wireless Support | Bluetooth, Wifi |
| External Testing Certification | CE |
| Multilingual Support | English, French, German, Spanish, Portuguese, Russian, Japanese, Italian, Simplified/Traditional Chinese, Korean, Polish, Turkish |
Please note that vehicle software requires re-downloading after switching the language.
13. User Tips
- The ArtiDiag600S offers advanced maintenance functions (like injector shut-off, throttle adaptation, brake maintenance mode, steering, oil reset, ABS bleed, TPMS reset) that can save you significant costs compared to professional mechanic services.
- Benefit from lifetime free updates, eliminating the need for monthly subscriptions often associated with other scan tools. Purchase once and receive continuous software enhancements.
- Utilize the AutoVIN feature for quick vehicle identification, streamlining your diagnostic process.
- Take advantage of the one-tap code clear and quick feedback options for efficient issue resolution and direct technical support.
14. Warranty and Support
14.1 TOPDON One Year Limited Warranty
TOPDON warrants to its original purchaser that the company's products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period).
For defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation.
TOPDON shall not be liable for any incidental or consequential damages arising from the device's use, misuse, or mounting.
If there is any conflict between the TOPDON warranty policy and local laws, the local laws shall prevail.
This limited warranty is void under the following conditions:
- Misused, disassembled, altered or repaired by unauthorized stores or technicians.
- Careless handling and/or improper operation.
Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice.
14.2 Support
For further support, you can scan the QR code below or visit the TOPDON website.

You can also find support information on the TOPDON website: www.topdon.com
For the full user manual, please refer to the PDF document referenced by the seller.