Introduction
The Edifier X3 Pro are true wireless earbuds designed for an immersive audio experience, featuring Active Noise Cancellation, Bluetooth V5.4, and multipoint connection. This manual provides detailed instructions for optimal use and care of your Edifier X3 Pro earbuds.
Key Features
- Active Noise Cancellation (ANC) and Ambient Awareness
- 8mm Dynamic Drivers for rich, versatile sound
- AI Call Noise Cancelling for clear hands-free calls
- Bluetooth® V5.4 for faster data transfer and reliable connection
- 0.05s Ultra-Low Latency for gaming and audio synchronization
- Long Battery Life: 7 hours playtime (earbuds), 22 hours total with charging case
- Multipoint Connection for seamless switching between devices
- IP54 Certificated for dust and splash resistance
- EDIFIER ConneX App support for customization and control
- Ergonomic design with 3 pairs of antibacterial ear tips for a secure and comfortable fit
Overview of Edifier X3 Pro key features including Active Noise Cancellation, 8mm Dynamic Drivers, AI Call Noise Cancelling, Bluetooth V5.4, 0.05s Low Latency, Long Battery Life, Multipoint Connection, IP54 certification, and EDIFIER ConneX App support.
Setup
Package Contents
- Edifier X3 Pro True Wireless Earbuds (L/R)
- Charging Case
- USB-C Charging Cable
- 3 Pairs of Antibacterial Ear Tips (S/M/L)
Charging the Earbuds and Case
- Place the earbuds into the charging case.
- Connect the charging case to a power source using the provided USB-C cable.
- The indicator light on the case will show charging status. A full charge for the case takes approximately 1.5 hours.
Note: Ensure the charging input is 5V === 1A for optimal charging.
Selecting and Installing Ear Tips
Choose the ear tips that provide the best seal and comfort for your ears. A good seal is crucial for optimal sound quality and effective noise cancellation.
Illustration of proper earbud fit and the three sizes of antibacterial ear tips for a secure and comfortable experience.
Initial Pairing
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Edifier X3 Pro" from the list to connect.
- Once connected, you will hear an audible confirmation.
Multipoint Connection
The Edifier X3 Pro supports multipoint connection, allowing you to connect to two devices simultaneously and switch between them seamlessly.
The Edifier X3 Pro earbuds demonstrating multipoint connection, allowing simultaneous connection to a laptop and a smartphone.
Operating Instructions
Touch Controls
The Edifier X3 Pro earbuds feature intuitive touch controls. Specific functions (e.g., play/pause, track skip, call management, ANC mode switching) can typically be customized and viewed within the EDIFIER ConneX App.
Active Noise Cancellation (ANC) and Ambient Awareness
The earbuds offer Active Noise Cancellation to reduce unwanted background noise and Ambient Awareness mode to let you hear your surroundings. These modes can be toggled via the touch controls or the EDIFIER ConneX App.
Visual representation of Active Noise Cancellation (ANC) being turned on and off, showing how it reduces ambient sound.
EDIFIER ConneX App
Enhance your experience by downloading the EDIFIER ConneX App. The app allows you to:
- Explore preset EQs and customize your listening style.
- Adjust noise cancellation and ambient sound levels.
- Update firmware for optimal performance.
- Rename your earbuds.
- Locate lost earbuds.
Screenshots of the EDIFIER ConneX App, demonstrating options for sound effects, noise cancellation controls, and game mode settings.
Low Latency Mode
Activate the 0.05s ultra-low latency mode for immediate audio feedback, ideal for gaming and video playback to ensure perfect synchronization.
The Edifier X3 Pro earbuds paired with a smartphone showing a game, illustrating the benefit of 0.05s ultra-low latency for an enhanced gaming experience.
Maintenance
Cleaning
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Use a dry cotton swab to clean the charging contacts on both the earbuds and the case.
Water and Dust Resistance
The Edifier X3 Pro earbuds are IP54-rated for dust and splash resistance, making them suitable for use during exercise or in light rain. However, please note:
- The charging case is NOT dust or water-resistant.
- Protection may not be permanent and can deteriorate due to daily wear and tear.
- Do not submerge the earbuds in water.
The Edifier X3 Pro earbuds shown with water droplets, highlighting their IP54 dust and splash resistance.
Battery Care
- Avoid fully discharging the battery frequently.
- Store the earbuds and case in a cool, dry place when not in use.
- Charge the device regularly, even if not used for extended periods, to maintain battery health.
Troubleshooting
- Earbuds not pairing/connecting: Ensure the earbuds are charged and in pairing mode. Turn off and on your device's Bluetooth, then try reconnecting. If issues persist, try resetting the earbuds (refer to the app or Edifier support for specific reset instructions).
- Poor sound quality: Ensure the ear tips provide a good seal in your ear. Adjust EQ settings via the EDIFIER ConneX App. Check if the audio source quality is high.
- Connectivity drops: Ensure your device is within the Bluetooth range (<10m) and there are no significant obstructions. Disconnect and reconnect the earbuds from your device.
- Call quality issues: Ensure the earbuds are properly seated in your ears. The AI Call Noise Cancelling feature should enhance clarity, but environmental factors can still affect performance.
- Earbuds not charging: Check that the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Edifier |
| Model | X3 Pro |
| Bluetooth Version | 5.4 |
| Bluetooth Protocols | A2DP, AVRCP, HFP |
| Wireless Type | Bluetooth (True Wireless) |
| Maximum Wireless Range | <10m |
| Audio Codecs | SBC |
| Driver Diameter | 8mm |
| Number Of Drivers | 2 |
| Vocalism Principle | Dynamic |
| Frequency Response Range | 20 - 20000Hz |
| Impedance Range | up to 32 Ω |
| Output Level | 92 ± 3dB (A) |
| Sound Isolating | Yes |
| Active Noise-Cancellation | Yes |
| With Microphone | Yes |
| Waterproof Rating | IP54 |
| Support APP | Yes (EDIFIER ConneX) |
| Playtime (ANC On) | 6h (earbuds) + 13h (case) = 19h total |
| Playtime (ANC Off) | 7h (earbuds) + 15h (case) = 22h total |
| Charging Time | Approx. 1.5h |
| Charging Method | Charging case |
| Charging Port | USB-C |
| Material | Plastic |
| Weight | 38.3g |
| Certification | CE |
Comprehensive technical specifications for the Edifier X3 Pro True Wireless Earbuds.
User Tips
- For optimal sound quality and noise cancellation, always ensure you select the correct size ear tips that provide a snug and comfortable seal in your ear canal.
- Regularly use the EDIFIER ConneX App to explore different EQ settings and customize your listening experience to suit various music genres or personal preferences.
- Keep the earbuds and charging case clean, especially the charging contacts, to ensure reliable charging and connectivity.
- Take advantage of the multipoint connection feature to seamlessly switch between your phone and computer for calls or media without re-pairing.
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Edifier website. For further assistance, technical support, or to download the EDIFIER ConneX App, please visit the Edifier support page or contact their customer service directly.
