1. Introduction
The FURUI PM-Pro is a versatile RFID IC/ID copier and duplicator designed for reading and writing various smart cards. This device supports a wide range of frequencies and card types, making it suitable for diverse applications such as access control, identification, and data management. Its compact and portable design, coupled with powerful software capabilities, allows for efficient card operations, including sector data editing and encryption cracking.
This manual provides detailed instructions on how to set up, operate, and maintain your PM-Pro device, along with troubleshooting tips and specifications.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x FURUI PM-Pro RFID IC/ID Copier
- 1 x USB Cable (integrated)
- (Note: Other products are not included unless specified by your retailer.)
Figure 2.1: The FURUI NFC PM-Pro device, a smart card read and write device, shown with its integrated USB cable for connectivity.
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | PM-Pro (Card reader) |
| Supported Frequencies | 125KHz, 250KHz, 500KHz, 375KHz, 625KHz, 750KHz, 875KHz, 1000KHz, 13.56MHz (ISO1443A) |
| Supported Card Reader Types | EM4100 / EM4200, Classic, UID, S50, S70, H-ID |
| Supported Write Card Types | T5577, EM4305, Mifare UID CUID FUID |
| Operating System Support | Windows XP, Windows 7, Windows 8, Windows 10 |
| Power Source | USB Powered |
| Battery Included | No |
| Charger Included | No |
| Color | Black |
| Material | Plastic |
| Dimensions (L x W x H) | 9.5 cm x 6 cm x 4 cm (approx. 3.74" x 2.36" x 1.57") |
| Weight | 0.101 kg (approx. 0.22 lbs) |
| Certification | CE |
Figure 3.1: Approximate dimensions of the FURUI NFC PM-Pro device.
4. Setup
Follow these steps to set up your FURUI PM-Pro device:
- Connect to Computer: Plug the integrated USB cable of the PM-Pro device into an available USB port on your Windows computer.
- Software Installation: The PM-Pro requires dedicated software for operation. If the software is not included in the package, please download it from the manufacturer's official website or contact customer support for the download link.
- Install Drivers: During software installation, ensure any necessary drivers for the PM-Pro are installed correctly. Follow the on-screen prompts.
- Launch Software: Once installation is complete, launch the PM-Pro software. The device status should show "Connected" in the software interface.
Figure 4.1: Detail view of the device highlighting the designated areas for placing IC (Integrated Circuit) and ID (Identification) cards for reading and writing operations.
5. Operating Instructions
The FURUI PM-Pro allows you to read, decode, write, and format various RFID/NFC cards. The software interface provides comprehensive control over these operations.
5.1. Reading an IC/ID Card
- Place the IC or ID card on the corresponding "IC READ WRITE" or "ID READ WRITE" area of the device.
- In the PM-Pro software, navigate to the "LowFreqCard" or "HighFreqCard" tab depending on your card type.
- Click the "Read" button in the "Operate" section.
- The software will display "IC card read successfully!" or similar confirmation, along with the card's serial number and decoded data in the "Decode block" section.
Figure 5.1: Screenshot of the NFC PM-Pro software interface displaying a successful IC card read, including the device type, serial number, status, and decoded hexadecimal data blocks. The 'Operate' section with 'Decode', 'Read', 'Write', 'Format' buttons is visible.
5.2. Decoding Encrypted Cards
The PM-Pro can crack most card encryption. For encrypted IC cards (e.g., S50, S70):
- Place the encrypted IC card on the "IC READ WRITE" area.
- Select the appropriate card type (S50 or S70) under "Parameter".
- If you have a known key, enter it in the "Use key" field. Otherwise, you can attempt a "Brute Attack" by selecting a decoding level.
- Click the "Decode" button. The software will indicate "IC card decoding is complete!" upon success.
- The decoded data will be displayed in the "Decode block" section (D). The operation buttons (C) will become active for further actions.
Figure 5.2: Screenshot of the NFC PM-Pro software interface indicating successful IC card decoding. Sections are labeled: B for decoding status, C for operation buttons (Decode, Read, Write, Format, Single Read, Single Write, Write to phone/band, Analysis, ImportDUM, Save data), and D for the decoded data blocks.
5.3. Writing to a Card
After reading or decoding a card, you can write the data to a compatible blank card (e.g., T5577, EM4305, Mifare UID CUID FUID).
- Ensure the data you wish to write is loaded or decoded in the software. Sector data can be edited directly in the "Decode block" section if needed.
- Place the blank writable card on the appropriate "IC READ WRITE" or "ID READ WRITE" area.
- Click the "Write" button in the "Operate" section.
- Confirm the write operation if prompted by the software.
5.4. Other Operations
- Format: Use this function to format compatible writable cards.
- Single Read/Single Write: For specific block operations.
- Write to phone/band: Allows writing data to compatible NFC-enabled phones or bands (functionality may vary).
- Analysis: For detailed analysis of card data.
- ImportDUM/Save data: To import or save card data files.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Software Updates: Regularly check the manufacturer's website for software updates to ensure optimal performance and compatibility with new card types.
- Avoid Physical Damage: Handle the device with care. Avoid dropping it or exposing it to excessive force.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device not recognized by computer. |
|
| Software shows "Disconnected" status. |
|
| Cannot read or decode a card. |
|
| Cannot write to a card. |
|
8. User Tips
- Software Availability: The device relies on specific software for its functions. Ensure you have the correct software installed. If not provided with the device, check the manufacturer's website for download links.
- Card Placement: For best results, ensure the card is placed flat and centered on the designated IC or ID read/write area during operations.
- Backup Data: Always save important card data using the "Save data" function before attempting complex operations like formatting or writing, especially when experimenting with new card types.
- Experiment with Decoding: For encrypted cards, if a direct key doesn't work, utilize the brute force attack options provided in the software, starting with lower decoding levels.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
