MiLESEEY D2

Contents

Mileseey D2 Laser Distance Meter User Manual

Model: D2

Mileseey D2 Laser Distance Meter with key features highlighted

Mileseey D2 Laser Distance Meter, showcasing its range (40m-120m), area measurement, ±2mm accuracy, and double bubbles.

1. Introduction

Thank you for purchasing and using the Mileseey D2 Laser Distance Meter. This device is a practical and high-precision measuring tool designed for home improvement, daily use, decoration, and construction. It provides stable and accurate measurements with various ranges (40M, 50M, 60M, 80M, 100M, or 120M depending on the model), suitable for both household users and on-site workers.

The Mileseey D2 is equipped with double level bubbles to help maintain balance during measurement, ensuring more stable and reliable results. Its high-accuracy design provides clear and trustworthy readings for distance, area, volume, and continuous measurements. The compact and lightweight body makes the D2 easy to carry, and its clear display and simple operation ensure quick and efficient use.

This laser measure is well-designed with a hard casing and unique anti-skid design, offering high working performance and competitive cost-effectiveness. It supports various measurement functions including continuous measurement, area measurement, volume measurement, and Pythagorean proposition measurement.

Product demonstration video for the Mileseey D2 Laser Distance Meter, showcasing its design and features.

2. Safety Instructions

For your safety during operation, please read all the following instructions carefully.

Warning:

  • The D2 is categorized as a Class 2 laser product (<1mW). Do NOT aim the laser beam at others, as it may cause damage to human eyes.
  • While the D2 is produced in accordance with rules and regulations, we cannot guarantee it will not be interfered with by other equipment, nor does it guarantee no harm to humans and animals.
  • DO NOT use the product under explosive or corrosive circumstances.
  • DO NOT use the product where medical equipment is nearby.
  • DO NOT use the product on an airplane.

Battery Disposal:

Protecting the environment is your responsibility! It is prohibited to dispose of used batteries with household refuse. Please obey local and regional regulations for disposal.

3. Setup

Battery Installation

The Mileseey D2 is powered by 2 AAA 1.5V batteries. Due to flight transportation restrictions, batteries are NOT included in the package.

  1. Open the battery cover located on the back of the device.
  2. Insert two AAA batteries, ensuring correct polarity (anode and cathode).
  3. Close the battery cover securely.
  4. If the device will not be used for a long period, please remove the batteries to prevent leakage.

Initial Operation and Button Functions

The device features a user-friendly keyboard and a clear display screen.

Mileseey D2 Laser Distance Meter with display showing measurement data and button layout

Mileseey D2 Laser Distance Meter with display showing measurement data, highlighting ±2mm accuracy, 30 historical data, optional reference, horizontal bubbles, and multiple measuring modes.

Keyboard Layout:

  1. MEAS (Measurement) Button: Short press to turn on the laser and perform a single measurement. Long press for continuous measurement.
  2. Function Button: Short press to switch between Area, Volume, and Pythagorean measurement modes.
  3. UNIT Button: Switches measurement units (m/in/ft/ft+in).
  4. Historical Data Button: Accesses stored historical data (up to 30 sets).
  5. Addition (+)/Subtraction (-) Button: Used for adding or subtracting measurements in single, area, or volume modes.
  6. Benchmark Button: Switches the measurement reference point (front or rear).
  7. Sound/Mute Switch: Toggles sound on or off.
  8. Back/Clear/Turn On/Off Button: Short press to return or delete data. Long press to turn the instrument on or off.

Display Screen Indicators:

  1. Laser On Indicator
  2. Measurement Benchmark (Front)
  3. Measurement Benchmark (Back)
  4. Length Measurement / Continuous Measurement Indicator
  5. Measurement Pattern Icon
  6. History Record Icon
  7. Battery Status Indicator
  8. First Display Line
  9. Second Display Line (Minimum value in continuous measurement)
  10. Third Display Line (Maximum value in continuous measurement)
  11. Main Display Line (Final measurement and calculation result)

4. Operation

Turning On/Off

  • Turn On: Long press the Power button.
  • Turn Off: Long press the Power button. The instrument will automatically turn off after 3 minutes of inactivity.

Single Distance Measurement

  1. Short press the MEAS button to turn on the laser.
  2. Aim the laser at the target.
  3. Short press the MEAS button again to perform a single measurement.
  4. The laser will turn off immediately after measurement, and the result will be displayed on the screen.

Continuous Measurement (Max/Min)

  1. Long press the MEAS button to enter continuous measurement mode.
  2. The display will show the continuous measurement icon (→→ı), along with minimum and maximum values.
  3. Press the MEAS button or Back/Clear button to stop continuous measurement.
  4. The continuous measurement function will automatically stop after five minutes.

Unit Switching

Press the UNIT button to cycle through measurement units: meters (m), inches (in), feet (ft), and feet+inches (ft+in).

Setting Measurement Benchmark

Press the Benchmark button to switch the measurement reference point between the front and rear of the device.

Diagram showing front and rear reference points and unit switching options

Diagram illustrating the two reference points (front and rear) and unit switching options (m, ft, in, ft in) for the Mileseey D2.

Sound/Mute

Press the Sound/Mute button to toggle the device's sound on or off.

Double Bubble Levels

The D2 is equipped with two bubble levels (vertical and horizontal) to provide more precise measurement. The laser measure can be adjusted to a horizontal state using these levels.

Diagram illustrating the two bubble levels (vertical and level) on the Mileseey D2

Diagram illustrating the two bubble levels (vertical and level) on the Mileseey D2 for precise horizontal adjustment.

5. Measurement Modes

The D2 laser distance meter is equipped with multi-functional measurement modes, making it suitable for various measurement tasks in houses, apartments, factories, and warehouses.

Diagram illustrating multiple measuring modes of the D2

Diagram illustrating multiple measuring modes of the D2, including distance, addition/subtraction, area, volume, Pythagorean (two points), and Pythagorean (three points).

Area Measurement

  1. Press the Function button once until the area icon (a square) appears on the display.
  2. Press the MEAS button to measure the first length (e.g., length).
  3. Press the MEAS button again to measure the second length (e.g., width).
  4. After the second measurement, the area and circumference calculation results will simultaneously appear on the main display screen.

Volume Measurement

  1. Press the Function button twice until the volume icon (a cube) appears on the display.
  2. Press the MEAS button to measure the first length (e.g., length).
  3. Press the MEAS button again to measure the second length (e.g., width).
  4. Press the MEAS button a third time to measure the third length (e.g., height).
  5. After the third measurement, the volume calculation result will automatically appear on the main display line.

Pythagorean Measurement (Direct)

This function allows you to measure distances indirectly, useful for places that are hard to reach. The instrument calculates distance using the Pythagorean theorem.

  1. Press the Function button three times until the direct Pythagorean icon appears on the screen.
  2. Follow the flashing side indicator and proceed with the first measurement (aim at the top point). The result will be displayed on the second display line.
  3. Keep the instrument as level as possible. The default measurement is horizontal level.
  4. Follow the flashing side indicator and proceed with the second measurement (aim at the bottom point). The measured distance will be displayed on the third display line.
  5. The calculated distance of the third side will be shown in the main display area.

Pythagorean Measurement (Indirect)

  1. Press the Function button four times until the indirect Pythagorean icon appears on the screen.
  2. Follow the flashing side indicator and proceed with the first measurement (aim at the top point). The measured distance will be displayed on the first display line.
  3. Keep the instrument as level as possible. The default measurement is horizontal level.
  4. Follow the flashing side indicator and proceed with the second measurement (aim at the middle point). The measured distance will be displayed on the second display line.
  5. Follow the flashing side indicator and proceed with the third measurement (aim at the bottom point). The measured distance will be displayed on the third display line.
  6. The calculated distance of the fourth side will be shown in the main display area.

Addition/Subtraction Calculation

  • Addition: Short press the +/- button.
  • Subtraction: Long press the +/- button.

When measuring distance, area, or volume, you can continue to measure the next value and add or subtract it from the current measured value by pressing the +/- button. All addition and subtraction functions can be operated repeatedly as needed.

History Data Storage

Press the Historical Data button continuously to review the last 20 measured or calculated values, which will be displayed on the screen in inverted sequence.

6. Specifications

Detailed specification table for the Mileseey D2

Detailed specification table for the Mileseey D2, listing maximum measuring range, accuracy, units, laser class, measurement types, historical memory, battery, operating/storage temperature, auto-off, and dimensions.

Mileseey D2 Technical Parameters
FeatureSpecification
Maximum Measuring Range40m / 50m / 60m / 80m / 100m / 120m (model dependent)
Measurement Accuracy±2mm (±1.0mm + 5x10-5D)
Measuring Unitsm / in / ft / ft+in
Laser ClassClass 2 (<1mW)
Laser Type630-670nm
Measurement TypesSingle, Continuous, Area, Volume, Direct Pythagorean, Indirect Pythagorean, Addition/Subtraction
Historical Memory30 sets
Display4-line display with backlight (HD screen)
ButtonsSoft rubber buttons
Power TypeBattery-Powered (2 x AAA 1.5V batteries, not included)
Battery LifeApprox. 5,000 measurement times
Operating Temperature0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature-10°C ~ 60°C
Auto Laser Off30 seconds
Auto Instrument Off180 seconds (3 minutes)
Dimensions (L*W*H)115mm * 50mm * 28mm
Weight95g

Note on Measuring Range: The maximum measuring range may vary between different models. Please refer to the outer packaging of your specific device for the actual measuring range.

7. Troubleshooting

All errors or failures will be shown as codes or an 'Error' message on the display. The following table explains the meaning of common codes and their solutions.

CodeReasonSolution
204Calculation errorRefer to the user manual and repeat the procedures.
220Low batteryPlease replace the batteries.
255Reflected light received is weak or measurement time is too longThe reflecting surface should be more reflective, or you should use a sighting board or white paper.
256Received signal is too strongThe targeted reflected light is too strong. Please use a sighting board or do not aim at strong light.
261Out of rangePlease measure within the specified range.
500Hardware errorSwitch the instrument on/off several times. If the error persists, please contact your dealer.

8. User Tips

  • Accuracy Conditions: The rated measuring range and accuracy are achieved under good conditions (good measuring surface, appropriate indoor temperature, and indoor light). Accuracy may decrease with strong sunlight, weak reflection from the measured surface, or large temperature differences.
  • Avoid Strong Sunlight: Strong sunlight can weaken laser energy, affecting accuracy and measuring range. If use in direct sunlight is unavoidable, consider using a smooth and opaque reflective plate.
  • Transparent Objects: Measurements through transparent objects (glass, water, crystal), strong light sources, strong light-absorbing objects, or highly reflective surfaces may be inaccurate. Use a target card for better results.
  • Calibration: If measurements are inaccurate under normal conditions, calibration may be required. The calibration method is as follows:
    1. Turn off the device.
    2. Simultaneously press buttons 1, 2, 3, and 5 (refer to keyboard layout on page 5) for approximately 3 seconds.
    3. The calibration page will appear. Use buttons 2/3 (up) or 4 (down) to adjust the error.
    4. Press button 1 to confirm the set value. The device will then shut down automatically.
  • No Angle Measurement: This device does NOT support angle measurement. The angle icon on some retail boxes is due to shared packaging with a rechargeable version that supports this feature.
  • 40M Version Pouch: The 40M version of the Mileseey D2 does NOT include a protective pouch. Only standard accessories are included.

9. Item Guides & Documents

A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and specifications for your Mileseey D2 Laser Distance Meter.

You can view the full user manual (PDF) here.

10. Contact Information

For support or inquiries, please contact:

  • Company: Lomvumtool Co., LTD & Shenzhen Mileseey Technology Co., Ltd.
  • Address: NO.69 Lucun Village Huajie Town, Yongkang, Jin Hua, Zhe Jiang, 321300, CN Zhongkai Six Road #137, Chenjiang Avenue, Zhongkai High-tech Area, Huizhou, Guangdong 516029 China. (Floor 2 & 3 of Intelligent Tower, Innovation Park of Huizhou Tonghu Ecological Smart Zone)
  • Website: www.mileseey.net
  • Email Address: customer-service@mileseey.com
  • Phone: (+86) 0755-86329055
  • Contact Person: Micky

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.