1. Introduction
Congratulations on your purchase of the CHENXI CX-8876 Automatic Mechanical Watch. This timepiece combines classic design with intricate mechanical movements, offering features such as a moon phase display, 24-hour sub-dial, visible flywheel, and luminous hands. This manual will guide you through the setup, operation, and maintenance to ensure optimal performance and longevity of your watch.
2. Setup
2.1 Initial Winding
Your CHENXI CX-8876 watch is an automatic mechanical timepiece. While it self-winds with wrist movement, it requires an initial manual winding to start. To do this:
- Ensure the crown is in position 1 (fully pushed in).
- Rotate the crown clockwise approximately 20-30 times. You may hear a slight clicking sound. This will build up enough power reserve to start the watch.
- Once started, regular wear (typically 8-10 hours a day) will keep the watch wound. If the watch stops due to lack of movement, repeat the manual winding process.
2.2 Setting Time and Features
The watch features a spiral crown for adjustments. Refer to the diagram below for visual guidance:

This diagram illustrates the key components and their functions: Hour Pointer (one lap is 24 hours), Hollow Flywheel (fully automatic chain), Moon Phase Pointer (changes as the hour hand rotates), and Spiral Crown (rotate in situ for about 20 turns for winding, which provides movement power).
- Setting Time: Pull the crown out to position 3 (farthest out). Rotate the crown to set the hour and minute hands. Push the crown back to position 1 when done.
- Setting 24-Hour Sub-dial: The 24-hour sub-dial typically synchronizes with the main time display. Adjusting the main time will automatically adjust this sub-dial.
- Setting Moon Phase: The moon phase pointer changes as the hour hand rotates. This feature is usually adjusted by rotating the main time hands past 24 hours or via a dedicated pusher (if present, not explicitly shown for this model, so assume linked to main time).
2.3 Strap Adjustment (for Steel Band Models)
If your watch comes with a steel band, you may need to adjust its length. Follow these steps carefully:

1. Distinguish detachable positions (indicated by arrows). Note: Adjustment methods may vary slightly by strap style.
2. Loosen the handle of the watch adjuster, place the watch strap into the removal slot, and ensure the needle of the adjuster is in the correct detachable position.
3. Twist the handle forcefully to install in the opposite direction. Note: The two ends of the steel needle are different.
3. Operating Instructions
3.1 Automatic Movement
The CHENXI CX-8876 is powered by an automatic mechanical movement. This means the watch is wound by the natural motion of your wrist. When worn regularly, the rotor inside the watch moves, winding the mainspring and providing power. If the watch is not worn for an extended period, it will stop and require manual winding to restart.
3.2 Watch Features
- Moon Phase Display: The sub-dial indicating the moon phase changes in sync with the main time, reflecting the lunar cycle.
- 24-Hour Sub-dial: Provides a 24-hour indication, useful for tracking day/night or a second time zone.
- Visible Flywheel (Tourbillon/Skeleton): The open-heart design showcases the intricate mechanical movement, specifically the balance wheel, often referred to as a 'flywheel' or 'tourbillon' in this context, highlighting the watch's craftsmanship.
- Luminous Display: The watch hands and hour markers are coated with a luminous material, allowing for readability in low-light conditions after absorbing light from daylight or artificial sources.

The watch features a layered luminous display where the pointers are covered with a luminous coating. This coating absorbs light during the day, enabling clear readability at night.
3.3 Water Resistance
This watch is rated for 3 Bar (3ATM) water resistance. This means it is suitable for daily use, such as splashes, rain, or hand washing. It is NOT suitable for showering, bathing, swimming, diving, or any water-related work. Avoid operating the crown or pushers when the watch is wet to prevent water ingress.

The watch features a mineral-reinforced glass mirror, providing high transparency, anti-shatter properties, and resistance to wear and blue light, ensuring a clear view of the dial.
4. Maintenance & Care
4.1 Routine Care

- Can be wiped with a soft cloth or cleaned with a soft brush.
- Avoid contact with sharp objects.
- Do not wear in damp environments (such as bathrooms, swimming pools, etc.).
4.2 General Care Tips
- Cleaning: Regularly wipe your watch with a soft, dry cloth to remove dust and perspiration. For leather straps, avoid excessive moisture.
- Temperature: Avoid exposing your watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect the movement and seals.
- Magnetic Fields: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, mobile phones, airport security scanners), as magnetism can affect the accuracy of mechanical movements.
- Impact: While durable, avoid dropping your watch or subjecting it to strong impacts.
- Chemicals: Avoid contact with solvents, detergents, perfumes, and cosmetic products, as they can damage the case, strap, or seals.
5. Troubleshooting
If you encounter issues with your watch, consider the following common troubleshooting steps:
- Watch Not Running: If the watch has stopped, it likely needs to be wound. Manually wind it by rotating the crown clockwise 20-30 times. If it still doesn't start, ensure it's not completely out of power reserve from prolonged inactivity.
- Inaccurate Time: Mechanical watches can be affected by magnetism or severe impacts. If the time is consistently fast or slow, try demagnetizing the watch (a watchmaker can do this) or consult a professional. Ensure it's adequately wound.
- Condensation Inside Crystal: Small amounts of condensation that disappear quickly are usually harmless. However, if large droplets appear or condensation persists, it indicates water ingress. Stop using the watch immediately and take it to a watchmaker for inspection and repair to prevent damage to the movement.
- Strap Issues: For leather straps, cracking or discoloration can occur with age and exposure to moisture. For steel bands, ensure all pins are securely in place after adjustment.
6. Specifications

Detailed specifications of the CHENXI CX-8876 watch.
| Feature | Specification |
|---|---|
| Model Number | CX-8876 |
| Movement | Automatic Self-Wind (Original Mechanical Movement) |
| Case Material | Alloy |
| Case Shape | Round |
| Case Thickness | 15mm |
| Dial Diameter | 44mm |
| Dial Window Material Type | Hardlex (Mineral Reinforced Glass) |
| Display Type | Roman Numeral |
| Band Material Type | Leather or Solid Steel Strip |
| Band Width | 22mm |
| Band Length | 24cm (Leather) / 220mm (Steel) |
| Clasp Type | Buckle (Bilateral Butterfly Buckle for steel, Metal Pin Buckle for leather) |
| Water Resistance Depth | 3Bar (Life Waterproof) |
| Features | Tourbillon, Skeleton, Luminous, Chronograph (decorative), Moon Phase, Night Light, Small Three Needles (sub-dials) |
| Boxes & Cases Material | Paper |
| Weight | 94.5g (Leather strap) / 164.5g (Steel strap) |
Note: All dimensions are manual measurements, there may be a reasonable error (strap error 5mm, other error 2mm).
7. User Tips
- Regular Wear: To maintain the power reserve of your automatic watch, wear it regularly. If you alternate watches, consider a watch winder to keep it running.
- Avoid Over-Winding: While automatic watches have mechanisms to prevent over-winding, excessive manual winding is generally unnecessary once the watch is running.
- Setting Time Safely: Avoid setting the date or other complications between 9 PM and 3 AM, as the gears for these functions are engaged during this period and manual adjustment can cause damage. Always set the time forward, not backward, if possible.
- Professional Servicing: Mechanical watches benefit from periodic servicing (every 3-5 years) by a qualified watchmaker to clean, lubricate, and adjust the movement.
8. Warranty & Support
For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty-related issues.
9. Product Overview Video
Watch this video for a dynamic overview of the CHENXI CX-8876 watch, showcasing its design, features, and different color variants.
A brief demonstration of the watch's aesthetic and functional elements, including the visible movement and various strap options.