Salange Desktop Projector Stand

Contents

Salange Universal Projector Stand

Instruction Manual

1. Product Overview

The Salange Universal Projector Stand is a versatile mounting solution designed for various projectors, cameras, and mobile phones. It offers 3-in-1 installation options: desktop, wall mount, and ceiling mount, providing flexibility for your viewing needs. The stand features a universal 1/4 inch screw interface for broad compatibility and multi-angle adjustment for optimal positioning.

Salange Projector Stand (Silver) with various projector setups
Salange Projector Stand (Silver) shown with different projector setups.
3-in-1 Installation options (Desktop, Wall Mount, Ceiling Mount) with a projector
The stand supports Desktop, Wall Mount, and Ceiling Mount installations.

2. Product Features

  • Multi-angle Adjustment: The head of the stand allows for 0-180° multi-angle adjustment, enabling precise positioning of your device.
  • Anti-slip Protection: The bottom of the stand is equipped with a silicone pad for enhanced anti-slip protection, ensuring stability.
  • Universal Compatibility: Features a universal 1/4 inch (6mm) screw interface, suitable for most projectors, cameras, and other compatible devices.
  • Balanced Center of Gravity: Designed for a balanced center of gravity, providing stability even under force.
Close-up of the universal 1/4 inch screw interface on the stand
Universal 1/4 inch screw interface for broad device compatibility.
Black projector stand showing 180° rotatable joints and dimensions
The stand features 180° rotatable joints for multidirectional adjustment.

3. Setup and Installation

The Salange Projector Stand offers flexible installation options. Please follow the steps below for your desired setup.

3.1 General Assembly

  1. Unpack all components: base plate, adjustable arm, and top mounting plate.
  2. Ensure all screws and joints are securely tightened before mounting any device.
  3. Attach your projector or device to the 1/4 inch screw on the top mounting plate.

3.2 Installation Types

The stand supports three primary installation methods:

  • Desktop Use: Place the stand on a flat, stable surface. Ensure the silicone pad on the base provides adequate grip.
  • Wall Mount: Secure the base plate to a sturdy wall using appropriate mounting hardware (not included). Ensure the wall can support the weight of the stand and your device.
  • Ceiling Mount: Secure the base plate to a ceiling joist or suitable ceiling mount point using appropriate hardware (not included). Verify the ceiling structure can safely bear the combined weight.
Silver projector stand with a projector mounted, showing desktop use
Desktop setup example.
Silver projector stand with a projector mounted, showing wall mount use
Wall mount setup example.
Silver projector stand with a projector mounted, showing ceiling mount use
Ceiling mount setup example.

3.3 Visual Installation Guide

Watch the video below for a visual demonstration of assembling the stand and mounting different projector types.

Demonstration of stand assembly and projector mounting.

4. Operating Instructions

Once your device is securely mounted, you can adjust the viewing angle:

  1. Angle Adjustment: The stand features 180° rotatable joints. Gently loosen the adjustment knobs (if present) or apply slight force to rotate the arm and top plate to achieve your desired projection angle.
  2. Secure Positioning: After adjusting the angle, ensure all joints are firm to maintain the position. The balanced center of gravity helps keep the device stable.

5. Maintenance

To ensure the longevity and optimal performance of your projector stand, follow these maintenance guidelines:

  • Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
  • Joint Inspection: Periodically check all joints and screws for tightness. Tighten any loose connections to prevent instability.
  • Weight Capacity: Do not exceed the specified weight capacities for desktop (11lbs/5kg) or ceiling mount (22lbs/10kg) to prevent damage or accidents.

6. Troubleshooting

  • Stand is unstable: Ensure the stand is placed on a flat, stable surface. Check that all screws and joints are tightened. Verify that the mounted device does not exceed the maximum weight capacity.
  • Device does not fit the screw: Confirm your device has a standard 1/4 inch (6mm) screw thread. If not, an adapter may be required (not included).
  • Difficulty adjusting angle: Ensure no obstructions are preventing movement. Apply gentle, even pressure when adjusting. Do not force the joints.

7. Specifications

FeatureSpecification
MaterialMetal (Aluminum Alloy)
Max Weight Capacity (Desktop)11 lbs / 5 kg
Max Weight Capacity (Ceiling Mount)22 lbs / 10 kg
Screw InterfaceUniversal 1/4 inch (6mm)
Angle Adjustment0-180° Rotatable Head
Base Plate Dimensions (Silver)15 cm (L) x 12 cm (W) / 5.91 in (L) x 4.72 in (W)
Base Plate Dimensions (Black)16 cm (L) x 12 cm (W) / 6.3 in (L) x 4.72 in (W)
Adjustable Arm Height7.5 cm / 2.95 in
Top Mounting Plate Dimensions8 cm (L) x 5.5 cm (W) / 3.15 in (L) x 2.17 in (W)
Product Weight (Packaged)0.332 kg
Package Dimensions18 cm (L) x 17 cm (W) x 3 cm (H)
Silver projector stand with dimensions and weight capacity information
Dimensions and weight capacity for the silver stand.
Black projector stand with dimensions and weight capacity information
Dimensions and weight capacity for the black stand.

8. User Tips

  • When using the black version of the stand, be aware that the physical image has been updated, and there might be slight variations in hole positions and manually measured dimensions.
  • Always ensure the silicone pad on the bottom of the stand is clean and free of debris to maximize its anti-slip effectiveness, especially for desktop use.
  • For wall or ceiling mounting, use appropriate anchors and screws suitable for your wall/ceiling material and the combined weight of the stand and your device. Consult a professional if unsure.
  • The stand is compatible with various devices beyond projectors, including cameras and mobile phones, provided they have a 1/4 inch screw mount.
Projector stand showing compatibility with projectors, cameras, and mobile phones
The stand is compatible with various devices.

9. Warranty and Support

For any questions, concerns, or support regarding your Salange Projector Stand, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims, if applicable.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.