Introduction
Thank you for choosing the HOMCOM Ergonomic Office Chair. This chair is designed to provide unmatched comfort and support for your workspace. Featuring a 135° reclining back with three lock-in positions, a rotating and adjustable headrest, and adjustable lumbar support, it ensures a tailored seating experience. The 3D armrests, retractable footrest, and adjustable seat height and depth further enhance full-body comfort. Its swivel wheels and seat improve mobility, while the breathable mesh fabric keeps you cool during extended use.

Figure 1: HOMCOM Ergonomic Office Chair (Grey)
Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 120 kg (264 lbs). Exceeding this limit may cause damage to the chair and potential injury.
- Proper Use: Use the chair only for its intended purpose as an office or computer chair. Avoid standing on the chair, using it as a step stool, or for any other unintended activities.
- Assembly: Ensure all parts are correctly assembled and tightened before use. Periodically check all fasteners to ensure they remain secure.
- Children: Keep children away from the assembly area. Small parts may be a choking hazard.
- Floor Protection: Consider using a chair mat to protect flooring from wheel marks, especially on soft surfaces.
Package Contents
Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Backrest with Headrest
- Seat Cushion
- Armrests (Left & Right)
- Base (Star Base)
- Casters (Wheels)
- Gas Lift Cylinder
- Mechanism Plate
- Footrest (Retractable)
- Hardware Pack (Screws, Washers, Allen Wrench)
Assembly Instructions
Assembly is required for this chair. Please follow these general steps. Refer to the included diagram for specific part identification if available in your package.
- Attach Casters to Base: Insert the casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled star base.
- Attach Mechanism to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.
- Attach Armrests: Secure the armrests to the seat cushion using the designated screws. Pay attention to the 'L' (left) and 'R' (right) markings if present.
- Attach Backrest: Connect the backrest to the seat mechanism or armrests (depending on design) using the appropriate screws.
- Attach Headrest: If the headrest is separate, slide it into the designated slot at the top of the backrest.
- Attach Footrest: If the footrest is separate, attach it to the underside of the seat or mechanism as per instructions.
- Connect Seat to Gas Lift: Carefully place the assembled seat onto the gas lift cylinder, ensuring it is centered. Apply gentle downward pressure to secure it.
- Final Check: Verify that all screws are tightened and the chair is stable before use.
Operating Instructions
Your HOMCOM Ergonomic Office Chair offers several adjustable features to customize your seating experience:
- Seat Height Adjustment: Locate the lever under the seat (usually on the right side). To raise the seat, lift the lever while taking your weight off the seat. To lower, lift the lever while seated. Release the lever to lock the height.
- Seat Depth Adjustment: Some models feature a lever or knob to slide the seat forward or backward, allowing you to adjust the depth to suit your leg length.
- Backrest Recline and Lock: The chair features a 135° reclining back with three lock-in positions. Use the recline lever (often on the left side) to adjust the angle. Push the lever down to recline, and pull it up to lock it in one of the three positions.
- Tilt Function: The chair has a tilt function allowing for a rocking motion. This can usually be activated or deactivated with a lever or knob. The tension of the tilt can often be adjusted by turning a large knob located under the seat.
- Adjustable Lumbar Support: The lumbar support can be adjusted forward/backward to provide optimal support for your lower back. Locate the adjustment mechanism on the backrest and slide it to your preferred position.

Figure 2: Adjustable Lumbar Support (Forward/Backward)
- Adjustable Headrest: The headrest is rotatable, adjustable forward/backward, and can be removed. Adjust it to support your neck and head comfortably.

Figure 3: Adjustable Headrest Features
- 3D Armrests: The armrests are adjustable in multiple dimensions (height, depth, pivot) to support your arms and shoulders. Locate the buttons or levers on the armrests to make adjustments.
- Retractable Footrest: Pull out the footrest from under the seat when you wish to use it, and push it back in when not needed.
- Swivel Function: The chair and seat can rotate 360 degrees for easy movement and access within your workspace.
Maintenance and Care
Regular maintenance will help prolong the life and appearance of your office chair.
- Cleaning Mesh Fabric: For general cleaning, use a soft brush or vacuum cleaner to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For tougher stains, use a mild soap solution and a damp cloth, then wipe with a clean, damp cloth and allow to air dry completely. Do not use harsh chemicals or abrasive cleaners.
- Cleaning Plastic/Metal Parts: Wipe plastic and metal components with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface.
- Caster Care: Periodically clean hair and debris from the casters to ensure smooth rolling.
- Tighten Fasteners: Every few months, check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric and degradation of plastic components.
Troubleshooting
Here are solutions to common issues you might encounter:
- Chair Squeaks: Check and tighten all screws and bolts. A small amount of silicone lubricant can be applied to moving parts or joints if the squeaking persists, avoiding the gas lift cylinder.
- Chair Does Not Adjust Height: Ensure the gas lift lever is fully engaged. If the gas lift cylinder is faulty, it may need replacement. Contact customer support for assistance.
- Casters Not Rolling Smoothly: Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels thoroughly.
- Chair Feels Unstable/Wobbly: Re-check all assembly connections and ensure all screws are securely tightened. Make sure the chair is on a flat, even surface.
- Backrest Does Not Recline/Lock: Check the recline lever and ensure it is functioning correctly. Ensure no obstructions are preventing the mechanism from engaging.
Specifications

Figure 4: Chair Dimensions
| Feature | Detail |
|---|---|
| Model Number | 921-819V00GY |
| Color | Grey |
| Material | Mesh (100% Polyester), PP, Foam |
| Overall Dimension | 66W x 64D x 114-122H cm |
| Reclining Dimension | 66W x 89D x 100-108H cm |
| Seat Size | 50W x 50D cm |
| Seat Height | 49-57 cm |
| Armrest Height to Seat | 19-26 cm |
| Back Size | 50W x 70L cm |
| Footrest Size | 19W x 35L cm |
| Weight Capacity | 120 kg (264 lbs) |
| Installation Method | Assembly |
| Rotation | Yes |
| Armrests | Included (3D Adjustable) |
| Rollers | Yes |
| Style | Mesh Chair |
User Tips
While no specific user reviews or Q&A were provided, here are some general tips for maximizing your ergonomic chair experience:
- Adjust Regularly: Take advantage of all the adjustment features. Your ideal ergonomic posture may change throughout the day, so don't hesitate to fine-tune the settings.
- Foot Placement: Ensure your feet are flat on the floor or a footrest. Adjust seat height accordingly.
- Lumbar Support: Position the lumbar support to fit the natural curve of your lower back. This is crucial for preventing back pain.
- Armrest Height: Adjust armrests so your arms are parallel to the floor, taking pressure off your shoulders and wrists.
Warranty and Support
For warranty information, technical support, or to inquire about replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt and model number (921-819V00GY) handy when contacting support.