JIKONG JK-B2A24S30P

Contents

JIKONG Smart Active BMS JK-B2A24S30P User Manual

Model: JK-B2A24S30P | Brand: JIKONG

1. Introduction

The JIKONG Smart Active BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It offers comprehensive management and protection features, ensuring the safety and longevity of your battery system.

This BMS is compatible with various lithium battery types, including LiFePO4, Ternary Lithium, and Lithium Titanate (LTO), supporting configurations from 8S to 24S.

JIKONG Smart Active BMS JK-B2A24S30P with key features

Figure 1: JIKONG Smart Active BMS JK-B2A24S30P highlighting its main functions and battery compatibility.

Key features include high-current active balancing, precise voltage and current acquisition, overcharge, over-discharge, overcurrent, and over/low temperature protection. It also integrates a Coulomb meter for accurate capacity tracking, Bluetooth communication for APP control, and optional GPS remote communication.

The core of this protection board is its energy transfer active balancing technology, which can achieve a continuous 2A balance current. This high-current active equalization ensures battery consistency, extends battery range, and delays battery aging by transferring energy from high-voltage cells to low-voltage cells with minimal loss.

JIKONG BMS installed in an electric scooter, highlighting interfaces and features

Figure 2: The JIKONG BMS integrated into an electric scooter system, showcasing its compact design and multi-interface capabilities.

The BMS is suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

BMS application scenarios including E-bike, Electric Tricycle, Low Speed Quad, Forklift, Cleaning Car, Tourist Car, Industrial Drone, Scooter, RV Energy Storage, Lithium battery, Power Bank, Storage battery

Figure 3: Diverse application scenarios for the JIKONG Smart Active BMS.

2. Specifications

2.1. General Parameters

Parameter Value Unit
ModelJK-B2A24S30P-
Brand NameJIKONG-
TypeLIFEPO4 Battery BMS-
Handware or SmartSMART BMS-
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS-
CertificationCE, FCC-
OriginMainland China-
Supply Voltage20-100V
Operating Power Consumption<1200mW
Operating Temperature-30 to 70°C
Maximum Number of Collection Strings24String
Maximum Balancing Current2A
Maximum Charging Current300A
Maximum Discharge Current300A
Maximum Instantaneous Current600A
Maximum Internal Loop Resistance0.21mΩ
Protective Plate Size208 × 120.7 × 15.6mm
Finished Weight675g
Supports InverterDely, Pylon, Growatt, SMA, etc.-
Product specification diagram with dimensions 120mm x 208mm x 15.6mm

Figure 4: Dimensions of the JK-B2A24S-30P BMS. Note: Data tolerance range is ±2mm.

2.2. Default Parameters (LiFePO4 Battery)

Parameter Value Unit
Balancing Initial Voltage3V
Maximum Balancing Current2A
Unit Overcharge Voltage3.6V
Single Overcharge Protection Recovery3.55V
Monomer Undervoltage Protection2.6V
Single Undervoltage Protection Recovery2.65V
Automatic Shutdown Voltage2.5V
SOC-0% Voltage2.6V
SOC-100% Voltage3.5V
Trigger Balancing Differential Pressure0.01V
Charging Overcurrent Protection Delay30S
Charging Overcurrent Protection Release Time60S
Discharge Overcurrent Protection Delay300S
Discharge Overcurrent Protection Release Time60S
Charging Overtemperature Protection70°C
Charging Overtemperature Restore60°C
Discharge Overtemperature Protection70°C
Discharge Overtemperature Recovery60°C
Charging Low Temperature Protection-20°C
Charging Low Temperature Restore-10°C
MOS Overtemperature Protection100°C
MOS Overtemperature Recovery80°C
Device Address0-

Note: Default parameters may vary slightly for Ternary Lithium and Lithium Titanate batteries. Refer to the full PDF manual for details.

3. Packing List

The standard package for the JIKONG Smart Active BMS JK-B2A24S30P includes the following items:

  • BMS x 1
  • Sampling line x 1 (70cm long)
  • NTC (Negative Temperature Coefficient) sensor x 1 (40cm long)
  • Switch x 1 (50cm long)
Packing list image showing BMS, sampling line, NTC, and switch

Figure 5: Contents of the JIKONG BMS package.

4. Installation and Wiring

The JK-B2A24S-30P series protection board is suitable for 7-24 series lithium battery packs. The specific wiring method depends on the number of cells in your battery pack. Always ensure all connections are secure before powering on the BMS.

4.1. General Wiring Steps

  1. Connect all the balance cables to the battery cells.
  2. Insert the balance cable into the BMS.
  3. Connect the B- line (total negative electrode) and the P- line (load/charger negative) to the battery.
  4. Connect the B+ line (total positive electrode) to the battery.
  5. Connect the NTC sensor and switch as required.

Important: Before starting the protection board, double-check that the balance cable is properly connected and that the P- and B- lines are correctly connected. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or even damage to the unit.

4.2. Wiring Diagrams

Wiring method for 24-string cells for JIKONG BMS

Figure 6: Wiring diagram for a 24-string cell configuration. This diagram illustrates the connections for the heater element, temperature control switch, total negative electrode (B-), total positive electrode (B+), protection board heating wire, equal load, inverter, and charger.

Wiring method for 8-string cells for JIKONG BMS

Figure 7: Wiring diagram for an 8-string cell configuration. This diagram shows similar connections as the 24-string setup, adapted for fewer cells.

4.3. Connector Pin Definitions

The BMS features various connectors for different functionalities. Below is a summary of the main connectors and their pin definitions. For a complete list, please refer to the full PDF manual (pages 21-24).

Connector Interface Name Pin Number Pin Name Definition
P1 (XH-15AW)Balance & Acquisition1B-Total negative battery
2B11st battery positive
.........
14B1313th battery positive
15B1414th battery positive
P2 (XH-11AW)Balance & Acquisition1B1515th battery positive
.........
9B2323rd battery positive
10B2424th battery positive (Total positive battery)
11B+BMS power supply, connected to the battery
P3 (XH-4AW)Temperature Interface1T1A1st temperature sensor pin A
2T1B1st temperature sensor pin B
3T2A2nd temperature sensor pin A
4T2B2nd temperature sensor pin B
P4 (XH-4AW)4 External Optional Temperature Interface1T3A3rd temperature sensor pin A
2T3B3rd temperature sensor pin B
3T4A4th temperature sensor pin A
4T4B4th temperature sensor pin B
P5 (A1254WF-4A)Communication Interface1RS485_BNegative terminal of RS485 signal
2RS485_APositive terminal of RS485 signal
3CAN_HPositive terminal of CAN signal
4CAN_LNegative terminal of CAN signal
P6 (A1254WF-2A)Buzzer Interface1VCCBuzzer power supply positive
2GNDBuzzer power negative
P7 (1.25T-4PWT)GPS Interface1VGPSPower output, voltage close to B+
2TXUART_TX, 3.3V
P8 (A1254WF-6A)Display Interface1VCCDisplay power output
2ADisplay RS485 signal positive
3BDisplay RS485 signal negative
4GNDNegative terminal
5K+Activate positive signal
6K-Activation negative signal
P9 (A1254WF-3A)Parallel Interface1GNDSignal ground
2P-ENParallel module enable signal (low level to turn on parallel module)
3P-statusParallel module status signal
P10 (A1254WF-5A)ACC Interface1ACC+ACC Positive
2ACC-ACC Negative
3NCNot connected
4C_Detect+Charger output 12V positive
5C_Detect-Charger output 12V negative

4.4. Device Activation

The BMS does not have a physical power-on control switch. It is designed for charging activation mode. After the battery assembly is complete, connect a charger (with a voltage 2V higher than the battery voltage) to activate the BMS. Alternatively, if you have an optional display screen and button, you can activate the device by inserting the display cable and pressing the button.

5. Operation

5.1. Mobile APP and Display Screen

The JIKONG BMS supports a mobile APP (for Android and iOS) and an optional display screen for monitoring and control. The APP connects via Bluetooth, allowing you to check battery status, modify parameters, and control charge/discharge switches.

Video 1: Demonstration of the JIKONG BMS display screen and APP interface, showing real-time data and settings.

Multi-screen display and data connection showing mobile app, PC software, and JIKONG home storage display

Figure 8: Overview of multi-screen display options, including mobile APP, PC software, and dedicated home storage display.

To install the mobile APP, scan the QR code below. Android Version 7 or higher is required.

QR code for JIKONG BMS mobile APP download

Figure 9: Scan this QR code to download the JIKONG BMS mobile APP.

5.2. Active Equalization (Balancing)

The BMS employs active equalization to balance cell voltages. You can set the balance trigger voltage difference (mV) via the APP. When the voltage difference between any two battery strings exceeds the set value, balancing automatically begins. It stops when the difference falls within the set range. The default balance current is 2A, adjustable based on your battery capacity. If not needed, the balancing function can be turned off in the APP.

Active balancing concept illustration showing energy transfer between battery cells

Figure 10: Illustration of active balancing, demonstrating lossless energy transfer between cells.

Table comparing pressure difference before and after balance for a 16-section 100AH series battery

Figure 11: Example showing the significant improvement in cell voltage balance after active equalization.

5.3. Protection Functions

The BMS includes various protection mechanisms to safeguard your battery:

  • Overcharge Protection: Prevents cells from being overcharged by cutting off charging when any cell voltage exceeds the set limit. Charging resumes when voltages recover.
  • Undervoltage Protection: Stops discharge when any cell voltage drops below the set undervoltage limit. Discharge resumes when cells are recharged above the recovery voltage. An automatic shutdown voltage is also set for critical low voltage.
  • Overcurrent Protection (Charge/Discharge): Monitors charging and discharging currents. If current exceeds the set limit for a specified delay, the BMS will cut off the respective operation. Operations resume after a set recovery time. (Note: Max continuous discharge current should not exceed 300A).
  • Overtemperature Protection (Charge/Discharge): Monitors battery temperature. If temperature exceeds the set limit during charge or discharge, the operation is halted. It resumes when the temperature falls below the recovery threshold.
  • Low Temperature Protection (Charge): Prevents charging at dangerously low temperatures. Charging is stopped if the temperature falls below the set limit and resumes when it rises above the recovery threshold. For extremely cold environments, an optional heating function is recommended.
  • Short Circuit Protection: Automatically detects and responds to short circuits. The BMS will cut off power to prevent damage. Recovery time is configurable.
  • Emergency Switch: In case of critical issues like over-temperature, over-discharge, over-charge, or cell drop, activating the emergency switch via the APP will enable charge and discharge for 30 minutes, allowing for emergency use.
  • Intelligent Sleep: The BMS can enter an intelligent sleep mode (after 26 hours of charge/discharge current less than 1A) to reduce its own power consumption. It can be reactivated by pressing a button or connecting a charger.

5.4. Optional Functions and Communication

  • Heating Function: Optional resistance heater or heating film can be used to warm the battery in low temperatures, preventing performance degradation. The heating current is designed for 10A. A temperature control switch (45-65°C normally closed) is recommended for secondary protection.
  • Alarm Function: Provides external alerts when the BMS detects security risks such as overtemperature, overcharge, or overdischarge.
  • Battery Parallel Function: Supports parallel connection of battery packs for energy storage applications. Requires parallel modules and disabling "charging current limiting" in the APP.
  • ACC Detection Function: Enables discharge. Can be activated by applying 20-100V between ACC+ and ACC- or by short-circuiting them. Also includes charger detection interfaces (C_detect+ and C_detect-) for 12V charger output signals.
  • GPS Function: A reserved GPS port allows for optional GPS module integration for battery location tracking.
  • Communication Functions (RS485, CAN): Supports optional RS485 and CAN communication. Users can configure the address and protocol via the APP to integrate with inverters and other systems.

6. User Tips

  • Inverter Compatibility: The JIKONG BMS is designed to support various inverter protocols, including Deye, Pylon, Growatt, and SMA. Users have also inquired about compatibility with Victron inverters. Always verify protocol compatibility with your specific inverter model.
  • Initial Setup: Take extra care during the initial wiring process. Double-check all balance cable connections and ensure the main power lines (B- and P-) are correctly installed before applying power.
  • APP Parameter Adjustment: Utilize the mobile APP to fine-tune parameters such as balancing trigger voltage, current limits, and temperature thresholds to match your specific battery chemistry and application needs.
  • Cold Weather Operation: If operating in consistently cold environments, consider installing the optional heating function to maintain optimal battery performance and prevent low-temperature charging issues.

7. Troubleshooting

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive PDF manual.

Problem Possible Cause Solution
BMS not powering on after initial connection. BMS requires charging activation; incorrect wiring. Ensure all balance and main power cables are correctly connected. Connect a charger (voltage 2V higher than battery) to activate. If using an optional display, insert its cable and press the button.
Battery cells are unbalanced. Active equalization is off or parameters are not optimized. Check APP settings to ensure active equalization is enabled. Adjust the balance trigger differential pressure if necessary. Verify balance cable connections.
Charging stops unexpectedly. Overcharge or overtemperature protection triggered. Check cell voltages and battery temperature via the APP. Ensure charging parameters are within safe limits. Allow battery to cool if overtemperature.
Discharge stops unexpectedly. Undervoltage, overcurrent, or overtemperature protection triggered. Check cell voltages, discharge current, and battery temperature via the APP. Recharge battery if undervoltage. Reduce load if overcurrent. Allow battery to cool if overtemperature.
BMS enters sleep mode too frequently. Intelligent sleep function enabled with default settings. If frequent sleep is not desired, disable the intelligent sleep function in the APP settings.
Communication issues with inverter/display. Incorrect protocol or wiring. Verify communication wiring (RS485/CAN) and ensure the correct protocol is selected in the BMS settings via the APP. Refer to the communication protocol document for specific details.

8. Warranty and Support

JIKONG products are manufactured under strict quality control standards. For specific warranty terms and conditions, please refer to the official product documentation or contact JIKONG customer support.

For technical assistance, troubleshooting, or any questions regarding your JIKONG Smart Active BMS, please refer to the comprehensive User Manual (PDF) or contact the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.