Introduction
Thank you for choosing the TELESIN Magnetic Ice Cube Light. This versatile and portable 60 LED photography lamp is designed to enhance your photos and videos with adjustable CCT (Color Correlated Temperature) and RGB (Red, Green, Blue) modes. Its magnetic attachment and universal phone clamp offer flexible mounting options for smartphones, tablets, and laptops, making it ideal for selfies, live streaming, vlogging, and creative photography.
Product demonstration showcasing features like magnetic mounting, CCT mode, RGB mode, and phone stand functionality.
Package Contents
Please check the package to ensure all items are present:
- Magnetic Smartphone Light × 1
- Magnetic Ring × 1
- Universal Phone Clamp × 1
- User Manual × 1
- Type-C Charging Cable × 1
Image showing the TELESIN Magnetic Ice Cube Light, phone clamp, magnetic ring, and charging cable.
Setup
1. Charging the Device
Before first use, fully charge the Magnetic Ice Cube Light. Connect the provided Type-C charging cable to the charging port on the device and a 5V/1A power source. A full charge takes approximately 2 hours.
2. Attaching to Your Device
- Magnetic Attachment: For devices with magnetic capabilities (e.g., iPhone with MagSafe), simply align the light with the back of your phone until it snaps into place. For other devices, use the included magnetic ring by adhering it to the back of your phone or phone case.
- Universal Phone Clamp: Attach the light to the universal phone clamp using the 1/4 screw interface. The clamp can then be securely fastened to your smartphone, tablet, or laptop. This open design ensures the front camera remains unobstructed.
Image illustrating the universal phone clamp and 1/4 threaded socket for versatile mounting.
Operating Instructions
Diagram of the light's controls: Power button, Mode key, Infinite knob, 1/4 screw hole, and Charging port.
1. Power On/Off
- To power on, press and hold the Power button for 3 seconds.
- To power off, press and hold the Power button for 3 seconds again.
2. Switching Modes
Press the Mode key to cycle through different lighting modes:
- CCT Mode: Press the mode button to enter CCT (Color Correlated Temperature) mode. In this mode, you can adjust the color temperature from 2500K (warm color) to 9000K (cool white).
- RGB Mode: Press the mode button to enter RGB mode. This mode offers full-color RGB infinite color matching, allowing for a wide range of vibrant lighting effects.
- Colorful Mode: Press and hold the mode button for 3 seconds to enter the dedicated colorful mode for dynamic lighting.
Image demonstrating the 360° full-color RGB mode for various style effects.
Image showing the adjustable color temperature range (2500K-9000K) and recommendations for warm (4500K) and cold (6500K) skin tones.
3. Brightness Adjustment
Use the Infinite knob to precisely adjust the brightness level in any mode. Rotate clockwise to increase brightness and counter-clockwise to decrease it.
4. Phone Stand Functionality
The light can be used as a convenient phone stand, supporting both horizontal and vertical orientations for hands-free viewing or recording.
Image demonstrating the light's ability to transform into a mobile phone holder for horizontal and vertical viewing.
Maintenance
To ensure the longevity and optimal performance of your TELESIN Magnetic Ice Cube Light, please observe the following precautions:
- Do not damage this product. If it becomes deformed or water-damaged, stop using it immediately.
- Do not cover the product with items such as towels or clothing during charging to avoid fire hazards.
- Keep this product out of reach of children.
- Do not disassemble the product or replace the battery.
- Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
Troubleshooting
- Light not turning on: Ensure the device is charged. Press and hold the power button for 3 seconds to turn it on.
- Light not charging: Verify that the Type-C charging cable is securely connected to both the light and a functional 5V/1A power source.
- Weak magnetic attachment: Ensure the magnetic ring is properly applied to your phone or case, and that there are no obstructions between the light and your device.
- Inconsistent light output: Check for any physical damage or obstructions to the LED panel. If the issue persists, contact customer support.
Specifications
Detailed product specifications.
| Feature | Specification |
|---|---|
| Dimensions | 68*66*22mm / 2.68*2.6*0.87inch |
| Number of LEDs | 60pcs |
| Weight | 100g |
| Color Temperature Range | 2500K-9000K |
| Maximum Power | 4.5W |
| Battery Capacity | 2000mAh/3.7V |
| Battery Life | Up to 2 hours (max brightness), Up to 20 hours (min brightness) |
| Charging Method | Type-C charging, 5V/1A |
| Charging Time | 2 hours |
| Color Rendering Index (CRI) | 90-95 |
| Illuminance | 500lux@0.5m |
| Operating Temperature | 5°C~45°C |
| Packing Size | 180*102*53mm / 7.09*4.02*2.09inch |
| Packing Weight | 205g |
User Tips
- Experiment with Color: Don't be afraid to try different color temperatures and RGB hues to match your environment or create unique artistic effects.
- Versatile Mounting: Utilize both the magnetic attachment for quick, on-the-go lighting and the universal phone clamp for more stable setups, especially when using tripods or for live streaming.
- Brightness Control: Adjust the brightness using the infinite knob to prevent overexposure and achieve soft, flattering illumination.
- Beyond Photography: This light can double as a convenient night light, desk lamp, or even an emergency light due to its portability and long battery life at lower brightness settings.
Warranty and Support
TELESIN products are manufactured to the highest quality standards. If you encounter any issues with your Magnetic Ice Cube Light, please refer to the purchasing platform for after-sales support and warranty information. Do not attempt to repair or disassemble the product yourself, as this may void your warranty.