1. Introduction
The MARVO KG956W Shogo 78W is a versatile 75% TKL mechanical gaming keyboard designed for optimal performance and customization. It features tri-mode connectivity (wired, 2.4G wireless, and Bluetooth), vibrant RGB backlighting, and hot-swappable switches, allowing users to personalize their typing and gaming experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.
2. Setup
2.1 Package Contents
Before you begin, please ensure all items are present:
- MARVO KG956W Shogo 78W Mechanical Keyboard
- USB Type-C Cable (1.6m)
- User Manual
2.2 Charging the Battery
The keyboard is equipped with a 1200mAh rechargeable battery, providing up to 50 hours of battery life. To charge:
- Connect the supplied USB Type-C cable to the keyboard's Type-C port.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The keyboard's indicator light will show charging status. You can continue to use the keyboard while it charges.
2.3 Connection Modes
The KG956W supports three connection modes:
- Wired Mode: Connect the keyboard directly to your device using the USB Type-C cable.
- 2.4G Wireless Mode: Insert the 2.4G USB receiver into your device's USB port. Switch the keyboard to 2.4G mode.
- Bluetooth Mode (BT 3.0/5.0):
- Switch the keyboard to Bluetooth mode (BT1, BT2, or BT3).
- On your device, search for Bluetooth devices and select 'MARVO KG956W'.
- Pair the devices. The keyboard supports up to three Bluetooth connections.
2.4 Hot-Swappable Switches
The keyboard features hot-swappable switches, allowing you to easily change switches without soldering. Use the included switch puller tool to carefully remove and insert compatible 3-pin or 5-pin mechanical switches.
3. Operating Instructions
3.1 Basic Key Functions
The KG956W features a 78-key layout, providing a compact design while retaining essential keys. It supports full-key anti-ghosting for precise input during intense gaming sessions.
3.2 RGB Backlight Control
The keyboard features approximately 16.8 million colors of RGB backlighting with a wide selection of preset light effects. Use the dedicated function keys (often combined with the 'Fn' key) to cycle through different lighting modes, adjust brightness, and change colors. Refer to the software section for advanced customization.
3.3 Software Customization
For advanced customization of lighting, key settings, and macros, download and install the official MARVO software. The software allows you to:
- Adjust RGB lighting effects, colors, brightness, and speed.
- Remap keys and create custom key functions.
- Record and assign macros for complex command sequences.
- Manage multiple profiles for different applications or games.
4. Maintenance
4.1 Cleaning
To maintain your keyboard's performance and appearance:
- Disconnect the keyboard from your device before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use a keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Avoid using harsh chemicals or abrasive materials.
4.2 Switch Care
As the switches are hot-swappable, ensure they are properly seated after any removal or insertion. Avoid excessive force when handling switches to prevent damage to the switch pins or the keyboard's PCB.
5. Troubleshooting
5.1 Keyboard Not Responding
- Ensure the USB cable is securely connected in wired mode.
- In 2.4G wireless mode, verify the USB receiver is properly inserted and the keyboard is switched to 2.4G.
- In Bluetooth mode, check that the keyboard is paired and selected as the active device. Try re-pairing if necessary.
- Ensure the keyboard battery is charged.
5.2 Backlight Not Working or Incorrect
- Check the keyboard's brightness settings using the function keys.
- Ensure the RGB backlight is enabled.
- If using customization software, verify the settings are correctly applied and the software is running.
5.3 Keys Not Registering
- Ensure the switches are properly seated in their sockets.
- If a specific key is not working, try swapping its switch with a known working switch to determine if the issue is with the switch or the keyboard.
- Clean any debris that might be under the keycap or switch.
6. Specifications
| Feature | Detail |
|---|---|
| Model | KG956W Shogo 78W |
| Keys | 78 Keys |
| Keyboard Standard | 78 Keys (75% TKL) |
| Connection Type | Wired (USB Type-C), 2.4G Wireless, Bluetooth (BT 3.0/5.0) |
| Interface Type | USB |
| Switch Type | Mechanical (MARVO switch) |
| Operation Style | Mechanical |
| Switch Rating | 50 million presses |
| Operating Force | 45 ± 10g |
| Key Route | 3.3 ± 0.5 mm |
| Hot-Swappable | Yes |
| Backlight Type | RGB (MULTICOLOR) |
| Battery Capacity | 1200mAh (3.7V) |
| Battery Included | Yes |
| Cable Length | 1.6m (detachable Type-C) |
| Product Dimensions | 354 x 106 x 38 mm |
| Full Size Keyboard | No |
| Wrist Support | No |
| Application | Desktop, Laptop, Tablet |
| OS Support | Mac/Windows |
| Language | English |
| Certification | CE |
| Origin | Mainland China |
7. Warranty and Support
MARVO products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official MARVO website or contact your local retailer. Keep your proof of purchase for warranty claims.
8. User Tips
- Experiment with Switches: Since the keyboard is hot-swappable, try different switch types to find what best suits your typing or gaming style.
- Customize RGB: Utilize the software to create unique lighting profiles for different games or applications to enhance your experience.
- Macro Efficiency: Program macros for frequently used commands or complex actions in games to gain an edge.
- Battery Management: For optimal battery life, fully charge the keyboard before its first use and avoid completely draining the battery regularly.
