GuliKit KK2T Controller

Contents

GuliKit KK2T Wireless Bluetooth Game Controller User Manual

Model: KK2T Controller (NS09T)

1. Introduction

Thank you for purchasing the GuliKit KK2T Wireless Bluetooth Game Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller, ensuring an optimal gaming experience across multiple platforms.

GuliKit KK2T Wireless Bluetooth Game Controller front view

Figure 1: GuliKit KK2T Wireless Bluetooth Game Controller (Front View)

GuliKit KK2T Wireless Bluetooth Game Controller back view showing model number NS09T

Figure 2: GuliKit KK2T Wireless Bluetooth Game Controller (Back View)

2. Package Contents

Please check the package for the following items:

  • GuliKit KK2T Wireless Bluetooth Game Controller
  • USB Charging/Data Cable
  • User Manual (this document)
  • Thumb Caps (optional, may vary by package)
GuliKit KK2T Controller in its retail packaging

Figure 3: Controller and Packaging

3. Setup and Connection

3.1 Charging the Controller

The controller comes with a built-in 950mAh Li-polymer battery. Before first use, or when the battery is low, connect the controller to a USB power source (e.g., PC, USB wall adapter) using the provided USB cable. The charging indicator will show the charging status.

Diagram showing the 950mAh Li-polymer battery inside the controller

Figure 4: Internal Battery Location

A full charge provides approximately 25 hours of gameplay with Turbo On settings. Battery life may be reduced when vibration features are active.

Image illustrating 25 hours of battery life with Turbo On settings

Figure 5: Battery Life Indication

3.2 Connecting to Devices

The GuliKit KK2T supports both wired and wireless connections across multiple platforms.

3.2.1 Wired Connection (PC)

Connect the controller to your PC using the USB cable. The controller will be automatically recognized, providing a 1000Hz lightning-fast response and super low delay for optimal gaming.

3.2.2 Bluetooth Wireless Connection

The controller supports Bluetooth wireless connection for PC, Nintendo Switch, Android, iOS, Steam Deck, and Raspberry Pi.

  1. Turn on the controller by pressing the Home button.
  2. Activate Bluetooth pairing mode on the controller (refer to specific button combinations in the Operating section).
  3. On your device (PC, Switch, Android, iOS, etc.), go to Bluetooth settings and search for available devices.
  4. Select "GuliKit KK2T" or similar from the list to pair.
Diagram showing wired USB connection and Bluetooth wireless connection for PC

Figure 6: Wired and Wireless PC Connection

Multi-platform compatibility icons for Switch, Windows, Android, macOS, iOS

Figure 7: Multi-Platform Compatibility Overview

3.2.3 Nintendo Switch Specific Features

  • Switch Wakeup: The controller supports waking up your Nintendo Switch console wirelessly.
  • NFC Amiibo Support: The controller includes NFC functionality for Amiibo scanning. Place your Amiibo figure on the designated area of the controller to activate its in-game features.
Image showing NFC Amiibo support with a character figure

Figure 8: NFC Amiibo Functionality

4. Operating the Controller

4.1 Button Layout and Swapping

The controller features a standard gamepad layout. It includes 2nd-Generation Tactile Feeling Button Switches. The PC and Switch button layouts are swappable to match your preferred gaming platform's conventions.

Close-up of controller buttons showing three-color injection molded keycaps and button switch diagram

Figure 9: Keycap and Button Switch Detail

4.2 Joysticks and D-pad

  • TMR Electromagnetic Joysticks: These joysticks offer anti-drift durability, high precision, and strong responsiveness.
  • Adjustable Joystick Sensitivity: The controller offers 3 modes of adjustable joystick sensitivity to meet your needs in different games.
  • "KK Ring" Joystick Cap: The joysticks feature replaceable anti-friction "KK Ring" caps for enhanced durability and feel.
  • Adjustable D-pad: The D-pad supports changing from the default 8-directions mode to a 4-directions mode to avoid D-pad ghosting issues in FPS games.
Diagram illustrating TMR Electromagnetic Joystick technology

Figure 10: TMR Electromagnetic Joystick Technology

Image showing adjustable joystick sensitivity with 3 modes

Figure 11: Adjustable Joystick Sensitivity

Diagram of the 'KK Ring' replaceable anti-friction joystick cap

Figure 12: "KK Ring" Joystick Cap

Diagram showing adjustable D-pad modes (8-direction to 4-direction)

Figure 13: Adjustable D-pad

4.3 Triggers

The controller is equipped with High Precision, Long Life Hall Effect Triggers for accurate and responsive input.

Close-up of Hall Effect Triggers with diagram

Figure 14: Hall Effect Triggers

4.4 Advanced Features

  • Auto-Pilot Gaming (APG): The Upgraded APG is optimized with better software and hardware architecture, implementing a self-correction mechanism for higher replay accuracy and less error margin (less than 0.01 seconds within 30 seconds). APG data is compatible with KK3 controllers.
  • Continuous Fire: Supports both Semi-Auto Continuous Fire and Full-Auto Continuous Fire modes.
  • Six-axis Gyroscope: Enjoy immersive motion control in compatible games.
  • Patented Motion Aim Assist: Specifically designed for PC FPS games to enhance aiming precision.
Diagram showing Auto-Pilot Gaming (APG) data compatibility with KK3 controllers

Figure 15: Auto-Pilot Gaming (APG)

Image detailing Upgraded Auto-Pilot Gaming (APG) features

Figure 16: Upgraded APG Details

Diagram indicating support for Semi-Auto and Full-Auto Continuous Fire

Figure 17: Continuous Fire Support

Image showing six-axis gyroscope motion control in a racing game

Figure 18: Six-axis Gyroscope in Action

Image showing patented Motion Aim Assist for PC FPS games

Figure 19: Motion Aim Assist for PC FPS Games

4.5 Power Management

The controller incorporates Patented Zero Power Technology in Standby Mode to conserve battery life when not in active use.

Image illustrating Patented Zero Power Technology in Standby Mode

Figure 20: Zero Power Technology

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
  • Charging: Ensure the controller is charged regularly to maintain battery health. Do not expose the battery to extreme temperatures.
  • Joystick Cap Replacement: The "KK Ring" joystick caps are replaceable. Gently pull off the existing cap and press the new one into place.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and moisture when not in use for extended periods.

6. Troubleshooting

Problem Possible Cause Solution
Controller does not turn on. Low battery. Charge the controller using the provided USB cable.
Unable to connect via Bluetooth. Controller not in pairing mode; device Bluetooth off; interference. Ensure controller is in pairing mode. Check device Bluetooth settings. Move closer to the device.
Joystick drift or inaccurate input. Calibration issue; environmental factors. The TMR Electromagnetic Joysticks are designed to be anti-drift. If issues persist, try recalibrating the joysticks via controller settings (if available) or contact support.
D-pad ghosting in FPS games. D-pad set to 8-directions mode. Adjust the D-pad from 8-directions mode to 4-directions mode.

7. Specifications

Feature Detail
Model Number GuliKit KK2T Controller (NS09T)
Brand GuliKit
Connectivity USB (Wired), Bluetooth (Wireless)
Wired Connection Rate (PC) 1000Hz
Wireless Connection Rate (PC) 160Hz Standard
Compatible Platforms Nintendo Switch (1.0.0 or Above), PC (Windows 7 or Above), Android (4.0 or Above), iOS (13 or Above), Steam, Raspberry Pi, macOS (10.10 or Above)
Battery 950mAh Li-polymer (Included)
Joystick Type TMR Electromagnetic, Hall Effect
Trigger Button Type Hall-Linear
D-pad Switch Type Membrane (Adjustable 8-direction/4-direction)
ABXY Switch Type Membrane (Swappable PC/Switch Layouts)
Bumpers Switch Type Membrane
Special Features Six-axis Gyroscope, Auto-Pilot Gaming (APG), Continuous Fire, Motion Aim Assist (PC FPS), NFC Amiibo Support, Switch Wakeup, Zero Power Standby
Package Dimensions (L x W x H) 20 cm x 10 cm x 10 cm
Package Weight 0.424 kg
Certification CE

8. User Tips

  • Optimize D-pad for FPS: If you experience D-pad ghosting in fast-paced FPS games, remember to switch the D-pad from 8-directions to 4-directions mode for improved precision.
  • Leverage APG: For repetitive actions or complex combos, utilize the Auto-Pilot Gaming feature to record and replay sequences, reducing fatigue and improving consistency.
  • Monitor Battery with Vibration: Be aware that using vibration features extensively will reduce the overall battery life. If you need longer play sessions, consider reducing vibration intensity or disabling it.
  • Customize Joystick Sensitivity: Experiment with the 3 adjustable joystick sensitivity modes to find the perfect balance for different game genres and personal preferences.
  • Utilize Motion Aim Assist: For PC FPS titles, enable the patented Motion Aim Assist feature to gain an edge in targeting and precision.

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your GuliKit KK2T controller, please refer to the official GuliKit website or contact the seller directly. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.