Introduction
The Power Train Z-X6 Graphics Card Bracket is designed to provide stable support for your graphics card, preventing sag and ensuring optimal performance. It features a real-time digital display for both CPU and GPU temperatures, along with customizable 5V 3-PIN ARGB lighting for aesthetic enhancement and synchronization with mainstream motherboards.

Safety Warnings
- POWER OFF: Always disconnect the computer from the electrical outlet before installation to prevent electric shock and component damage.
- STABILITY HAZARD: Ensure the bracket is firmly positioned and secured to the case floor. An unstable or shifting bracket can allow the GPU to sag again or fall, potentially damaging the GPU, motherboard, or other components.
- CORRECT ADJUSTMENT: Adjust the support height only enough to eliminate GPU sag. Applying excessive upward pressure can damage the GPU's PCB, the PCIe slot on the motherboard, or the PCIe connector.
- COMPONENT INTERFERENCE: Before final assembly, confirm the bracket does not touch or put pressure on any fragile components (e.g., small capacitors on the GPU, fan blades, or cables).
- MAGNETIC HAZARD (if applicable): Keep away from magnetic storage media (e.g., traditional hard drives, credit cards) as the magnets may cause data loss or damage.
- SMALL PARTS: Contains small screws or components. Keep out of reach of children to prevent choking.
Setup & Installation
Follow these steps for quick and safe installation of your graphics card bracket:
- Power Off: Turn off and unplug your computer from the electrical outlet.
- Open Case: Remove the side panel of your PC case for clear access to the GPU area.
- Position Bracket: Place the bracket's base flat on the bottom of the case, directly underneath the sagging part of your graphics card (GPU).
- Adjust Height: Extend or retract the support column (usually via a screw or magnetic mechanism) until it gently lifts the GPU to a level, horizontal position. Do not overtighten or lift the GPU excessively.
- Secure Bracket: If the base is magnetic, ensure it's attached to a steel surface. If it uses adhesive, clean the case floor and press firmly to secure.
- Final Check: Ensure the bracket is stable and the GPU is securely supported without putting upward strain on the PCIe slot.

Connectivity
The bracket requires a 9-pin USB connection for the motherboard (for temperature display data) and a 5V 3-PIN ARGB connector for lighting synchronization. Connect the 5V 3-PIN ARGB to your motherboard's ARGB header or a compatible ARGB controller.

Operating Instructions
Temperature Display
The Z-X6 bracket features a digital screen that displays real-time CPU and GPU temperatures. To ensure accurate temperature readings, you must download and install the dedicated software/driver from the manufacturer's website. Without the software, the display may show a fixed default temperature (e.g., 20°C).

ARGB Lighting Synchronization
The integrated ARGB lighting supports synchronization with mainstream motherboards such as ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync via a 5V 3-PIN ARGB header. This allows you to control the lighting effects and colors through your motherboard's software.
Available lighting modes include:
- Breathing
- Music (sound-reactive)
- Static (solid color)
- Flashing
- Wave
- Rainbow
- Colorful (dynamic color changes)
- Random


Maintenance
The Power Train Z-X6 Graphics Card Bracket is designed for durability with its metal paint shell. To maintain its appearance and functionality:
- Cleaning: Gently wipe the bracket with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Inspection: Periodically check that the bracket remains securely in place and that all connections are firm. Ensure no cables are pinched or stressed.

Troubleshooting
- Temperature display shows 20°C or incorrect readings:
- This typically indicates that the necessary software/driver for the temperature display is not installed or running. Please download and install the official software from the manufacturer's website. Ensure the 9-pin USB connector is properly connected to your motherboard.
- ARGB lighting is not syncing or not working:
- Verify that the 5V 3-PIN ARGB connector is correctly plugged into your motherboard's ARGB header or a compatible controller.
- Ensure your motherboard's ARGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion) is installed and up-to-date.
- Check if the lighting is enabled and configured within your motherboard's ARGB software.
- Bracket does not fit perfectly or mounting holes are misaligned:
- While designed for broad compatibility, some PC cases may require minor adjustments. Users have reported needing to slightly enlarge mounting holes in some instances. Exercise caution if making such modifications.
Specifications
| Attribute | Detail |
|---|---|
| Name | Temp ARGB GPU Holder |
| Model | Z-X6 |
| Material | Metal paint, ABS (Aluminum) |
| Size | 280*15*42.5mm (Length: 28cm, Width: 1.5cm, Height: 4.25cm) |
| Weight | 320g |
| Applicable | Supporting Graphics Cards (GPUs) |
| Color Options | Black, White |
| Power Interface | 5V 3-PIN ARGB |
| RGB Support | A-RGB (Addressable RGB) |
| Origin | Mainland China |


User Tips
- Software for Temperature: Remember to download and install the dedicated software/driver for the temperature display to function correctly and show real-time CPU/GPU temperatures.
- ARGB Connectivity: The bracket uses a 5V 3-PIN ARGB connector. Ensure your motherboard or controller has a compatible header.
- Mounting Flexibility: The bracket is sturdy and offers good adjustability. If mounting holes don't align perfectly, a slight modification to your case might be needed, as noted by some users.
- Accuracy: The integrated temperature display is generally accurate, with a reported margin of error of ±3°C.
- Lighting Control: You can turn off the ARGB lighting while keeping the temperature display active, offering flexibility in aesthetics.
Compliance & Standards
This product, as a mechanical support component, is designed to be used with equipment that complies with:
- CE Marking: Where applicable as a mechanical component of electronic equipment.
- EN 62368-1:2014 + A11:2017: Safety of Audio/Video and ICT Equipment.
Support
For further assistance or detailed information, please refer to the official user manual PDF:
For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.