HOMCOM 831-922V01WT

Contents

HOMCOM Dressing Table with Mirror and LED Lights

Model: 831-922V01WT

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your HOMCOM Dressing Table with Mirror and LED Lights. Please read these instructions carefully before assembly and use, and retain for future reference.

HOMCOM Dressing Table with Mirror and LED Lights

Figure 1: HOMCOM Dressing Table with Mirror and LED Lights

Safety Information

  • Ensure all parts are present and undamaged before assembly.
  • Follow assembly instructions carefully to prevent injury or damage.
  • Do not exceed the maximum weight capacity of 41kg (total), 15kg (tabletop), 3kg (large/middle drawer), 2kg (small drawer/shelf).
  • Always use the provided anti-tipping straps to secure the dressing table to a wall, preventing accidental tipping.
  • Keep electrical components (LED mirror, USB cable) away from water.

Package Contents

Verify that all components are included in your package before beginning assembly.

  • Dressing table components (MDF panels, drawers, shelves)
  • Rubber wood legs
  • Round mirror with integrated LED light
  • USB power cable for LED light
  • Gold tone handles
  • Non-slip felt pads
  • Anti-tipping straps and hardware
  • Assembly hardware (screws, dowels, etc.)

Setup and Assembly

Assembly is required for this dressing table. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list.
  2. Assemble Main Table Structure: Follow the included assembly diagrams (not provided in this manual, refer to product packaging) to connect the MDF panels that form the main tabletop and drawer sections.
  3. Install Drawers: Insert the assembled drawers into their respective slots. Ensure they slide smoothly.
  4. Attach Legs: Secure the rubber wood legs to the designated points on the underside of the main table and the side cabinet. Attach non-slip felt pads to the bottom of the legs.
  5. Mount Mirror and Shelving: Attach the mirror unit and the upper shelving unit to the main table as per instructions.
  6. Install Handles: Secure the gold tone handles to all drawers.
  7. Secure Anti-Tipping Straps: Attach the anti-tipping straps to the back of the dressing table and then to a sturdy wall stud using appropriate hardware. This step is crucial for safety.
Stable and Safe Design Features

Figure 2: Stable and Safe Design Features (Anti-tipping Design, Rubber Wood Legs, Non-slip Felt Pads)

Spacious Storage Space Overview

Figure 3: Spacious Storage Space (1 Shelf, 4 Compartments, 5 Drawers)

Operating Instructions

LED Mirror Operation

  1. Power Connection: Connect the USB cable from the LED mirror to a compatible USB power adapter (5V, 2A recommended, adapter not included) and plug it into a power outlet.
  2. Power On/Off: Touch the sensor switch located on the mirror surface to turn the LED light on or off.
  3. Adjust Color Temperature: With the light on, touch and hold the sensor switch to cycle through the three available color temperature settings: White Light (6500K), Warm White Light (4000K), and Yellow Light (3500K). Release your finger when the desired setting is reached.
Illuminating LED Mirror with Touch Switch and USB Connection

Figure 4: Illuminating LED Mirror with 3 Color Temperature Settings and Touch Switch, showing USB cable connection.

LED Mirror Light Settings

Figure 5: Visual representation of White Light, Warm White Light, and Yellow Light settings.

Maintenance

  • Cleaning: Wipe the dressing table surfaces (MDF, rubber wood, glass) with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Mirror Cleaning: Use a glass cleaner specifically designed for mirrors and a lint-free cloth to clean the mirror surface.
  • LED Light Replacement: The LED light is detachable. If replacement is needed, carefully detach the existing light and replace it with a compatible unit. Ensure power is disconnected before attempting replacement.
  • Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
  • Anti-Tipping Straps: Regularly inspect the anti-tipping straps and their wall attachment for any signs of wear or loosening.

Troubleshooting

Problem Possible Cause Solution
LED mirror light does not turn on.
  • USB cable not properly connected.
  • USB adapter not plugged in or faulty.
  • Power outlet not working.
  • LED light unit is faulty.
  • Ensure the USB cable is securely connected to both the mirror and the adapter.
  • Check if the USB adapter is plugged into a working power outlet. Try a different adapter or outlet.
  • If the light unit is faulty, consider replacing the detachable LED light.
Dressing table feels unstable.
  • Legs not securely tightened.
  • Anti-tipping straps not installed or loose.
  • Uneven floor surface.
  • Check and tighten all leg fasteners.
  • Ensure anti-tipping straps are properly installed and secured to a wall stud.
  • Adjust non-slip felt pads or place shims under legs to level the table.
Drawers do not slide smoothly.
  • Drawer runners misaligned or damaged.
  • Obstruction in the drawer slide.
  • Inspect drawer runners for proper alignment and damage. Realign or replace if necessary.
  • Remove any objects obstructing the drawer's path.

Specifications

Feature Detail
Model831-922V01WT
ColourWhite
MaterialsMDF, Rubber Wood, Glass
Overall Dimension100W x 44D x 137H cm
Mirror SizeΦ40 cm
Tabletop Size80W x 38D x 76H cm
Large Drawer Inner Size33W x 28.5D x 7.2H cm
Middle Drawer Inner Size21.8W x 28.5D x 8.2H cm
Small Drawer Inner Size19.2W x 7D x 10.5H cm
Top Left Open Compartment Size54W x 8.5D x 3/10.6H cm
Top Right Open Compartment Size23.6W x 9.7D x 15H cm
Bottom Right Open Compartment Size27W x 34.5D x 14.5H cm
USB Cable Length1.5 m
Colour Temperature6500K (White), 4000K (Warm White), 3500K (Yellow)
Lumen980 LM
Lifespan30000 Hours
Output10W, 5V, 2A
Maximum Load Capacity (Total)41 kg
Maximum Load Capacity (Tabletop)15 kg
Maximum Load Capacity (Large/Middle Drawer)3 kg each
Maximum Load Capacity (Small Drawer/Shelf)2 kg each
Dressing Table Dimensions Diagram

Figure 6: Overall Dimensions (100cm W x 44cm D x 137cm H, Mirror Φ40cm, Tabletop 76cm H)

User Tips

  • For optimal LED mirror performance, use a dedicated 5V/2A USB power adapter.
  • Organize smaller items in the drawers and open compartments to maximize storage efficiency.
  • Periodically check the stability of the table, especially after moving it, and re-secure anti-tipping straps if necessary.

Warranty and Support

For any questions regarding assembly, missing parts, or product functionality, please contact the retailer or manufacturer's customer support. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.