Introduction
Thank you for choosing the HOMCOM 2 Door Wardrobe. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new wardrobe. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
This wardrobe features a modern design with a white body and grey accents, offering ample storage with a hanging rail, two drawers, and multiple shelves. It is designed for use in bedrooms and spare rooms.
Safety Information
- Always assemble the wardrobe on a soft, clean surface to prevent scratches.
- Ensure all parts are present and undamaged before assembly. Do not use damaged parts.
- Keep small parts and packaging materials away from children and pets.
- Tighten all fasteners securely, but do not overtighten. Periodically check and re-tighten fasteners.
- Anti-Tipping Design: This wardrobe MUST be securely anchored to a wall using the provided anti-tipping straps to prevent serious injury from tipping.
- Do not allow children to climb on or play with the wardrobe.
- Distribute weight evenly across shelves and in drawers. Do not overload the unit.
Package Contents
Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Wardrobe Panels (various sizes)
- Hardware Pack (screws, dowels, cam locks, hinges, drawer slides, handles)
- Hanging Rail
- Pine Wood Legs
- Anti-Tipping Straps and Wall Anchors
- Instruction Manual
Assembly Instructions
Assembly is required for this wardrobe. It is recommended to have two people for assembly. Please follow the steps carefully.

- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the furniture.
- Identify Parts: Unpack all components and compare them with the parts list (refer to Figure 1). Group similar hardware items.
- Assemble Base: Attach the pine wood legs to the bottom panel of the wardrobe. Ensure they are securely fastened.
- Construct Frame: Begin by attaching the side panels to the base and back panel. Use the provided screws, dowels, and cam locks as indicated in the diagrams.
- Install Shelves: Insert the fixed shelves into their designated slots. The top compartment shelf and the bottom shelf for the hanging section should be installed at this stage.
- Assemble Drawers: Construct the two drawers by attaching the sides, front, and back panels, then securing the bottom. Install the steel drawer slides onto the drawer sides and the corresponding slides onto the wardrobe frame.
- Install Hanging Rail: Secure the hanging rail within the designated compartment.
- Attach Doors: Mount the two wardrobe doors using the steel hinges. Adjust hinges as necessary to ensure proper alignment and smooth operation.
- Install Hidden Handles: Attach the hidden handles to the doors and drawers.
- Attach Anti-Tipping Straps: Once the wardrobe is in its final position, attach the anti-tipping straps to the top rear of the wardrobe and securely fasten them to a wall stud or appropriate wall anchor. This step is critical for safety.

Operating and Usage
This wardrobe is designed for storing clothing and accessories in a bedroom environment.
- Hanging Rail: Use the integrated hanging rail for items like shirts, dresses, and coats. Do not exceed the maximum weight capacity of 10 kg.
- Shelves: The top and bottom shelves are suitable for folded garments, bedding, or storage boxes. Each shelf has a weight capacity of 25 kg.
- Drawers: The two bottom drawers are ideal for smaller items, socks, underwear, or accessories. Each drawer has a weight capacity of 10 kg. The steel rails ensure smooth opening and closing.
- Doors: The double doors provide easy access to the main compartments. Ensure they close properly to keep contents dust-free.

Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Dusting: Regularly dust the wardrobe to prevent buildup.
- Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Hinges and Slides: If doors or drawers become stiff, a small amount of silicone spray lubricant can be applied to the hinges and drawer slides.
Troubleshooting
- Wobbly Wardrobe: Ensure all screws are tightened. Check that the wardrobe is on a level surface. If not, use shims under the legs. Confirm anti-tipping straps are securely installed.
- Doors Not Closing Properly: Adjust the hinges on the doors. Most hinges allow for minor adjustments to align the doors.
- Drawers Sticking: Check that the drawer slides are correctly installed and free of obstructions. Apply a small amount of lubricant if needed. Ensure drawers are not overloaded.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | 831-531WT |
| Color | White, Grey |
| Material | Particle Board, MDF, Pine Wood (legs), Steel (rails, hinges) |
| Overall Dimensions (W x D x H) | 88.9 cm x 50.1 cm x 184.5 cm |
| Top Compartment Size (W x D x H) | 85.1 cm x 46.9 cm x 30 cm |
| Bottom Compartments Unit Size (W x D x H) | 85.1 cm x 46.9 cm x 108.6 cm |
| Hanging Rail Length | 85.1 cm |
| Left Bottom Compartment Size (W x D x H) | 40.7 cm x 46.9 cm x 31.5 cm |
| Drawer Inner Size (W x D x H) | 35 cm x 35 cm x 8 cm |
| Bottom to Floor Clearance | 8 cm |
| Total Weight Capacity | 80 kg |
| Single Shelf Weight Capacity | 25 kg |
| Hanging Rail Weight Capacity | 10 kg |
| Drawer Weight Capacity | 10 kg |
User Tips
- For optimal stability, ensure the wardrobe is placed on a flat, even surface.
- When moving the wardrobe, empty it first and lift it rather than dragging to prevent damage to the legs and frame.
- Consider using drawer organizers to maximize the utility of the storage drawers.
Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please contact HOMCOM customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
Please refer to the seller's website or your purchase documentation for specific warranty terms and contact information.