HOMCOM Double Bed Frame

Contents

HOMCOM Double Bed Frame Instruction Manual

Model: Double Bed Frame

Introduction

This manual provides detailed instructions for the assembly, use, and maintenance of your HOMCOM Double Bed Frame. Designed with an industrial style, this bed frame features a sturdy steel construction with a rustic brown particleboard headboard and footboard, offering both durability and aesthetic appeal. Please read this manual thoroughly before assembly and retain it for future reference.

Assembled HOMCOM Double Bed Frame

Figure 1: Assembled HOMCOM Double Bed Frame

Safety Information

  • Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.
  • Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
  • Tighten all screws and bolts securely, but do not overtighten. Periodically check and re-tighten fasteners.
  • Keep small parts away from children during assembly.
  • Do not stand or jump on the bed frame.
  • The maximum weight capacity for this bed frame is 300kg. Do not exceed this limit.
  • Use only the recommended mattress size to ensure proper fit and support.

Package Contents

Please verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

  • Headboard (Particleboard and Steel frame)
  • Footboard (Particleboard and Steel frame)
  • Side Rails (Steel)
  • Steel Slats
  • Support Legs (9 total)
  • Assembly Hardware (screws, bolts, washers, Allen key)
  • Instruction Manual
Components of the bed frame including headboard, slats, and support legs

Figure 2: Key structural components of the bed frame

Setup and Assembly

Assembly is required for this bed frame. It is recommended that two adults assemble the product. Please follow these general steps:

  1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list to ensure everything is present.
  2. Assemble Headboard and Footboard: Attach the headboard and footboard panels to their respective steel frames using the provided hardware.
  3. Connect Side Rails: Attach the side rails to the assembled headboard and footboard using the appropriate bolts and nuts. Ensure the connections are secure.
  4. Install Support Legs: Attach the nine support legs to the designated points on the bed frame, including the center support beam.
  5. Place Steel Slats: Lay the steel slats across the bed frame, ensuring they are evenly spaced and securely fastened to the side rails. This forms the mattress support.
  6. Final Tightening: Once all components are in place, go back and gently tighten all screws and bolts to ensure a stable and non-squeaky structure.
Dimension diagram of the bed frame, illustrating various parts and measurements

Figure 3: Bed frame dimensions and structural overview

Operating Instructions

Your HOMCOM Double Bed Frame is designed for comfortable and stable sleep. Please note the following:

  • Mattress Compatibility: This frame is designed for a double-sized mattress (approximately 135/137cm W x 190cm D). A mattress is not included with the bed frame.
  • Weight Capacity: The bed frame has a maximum load capacity of 300kg. Distribute weight evenly across the bed.
  • Under-Bed Storage: The frame provides 25.5cm of clearance underneath, ideal for discreet storage of boxes or other items to keep your bedroom tidy.
Under-bed storage space with 25.5 cm height indicated

Figure 4: Illustration of under-bed storage space

Maintenance

  • Cleaning: Wipe the steel frame and particleboard surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Fastener Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
  • Inspection: Inspect the bed frame for any signs of wear, damage, or loose components. Address any issues promptly.

Troubleshooting

Issue: Bed frame is squeaking.
Solution: Squeaking is often caused by loose connections. Check and re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and where the slats attach. Ensure all support legs are firmly on the ground.
Issue: Bed frame feels unstable or wobbly.
Solution: Ensure all assembly steps have been followed correctly and all hardware is fully tightened. Verify that the bed frame is placed on a level surface. Check if any support legs are bent or damaged.

Specifications

FeatureDetail
BrandHOMCOM
Model NameDouble Bed Frame
Item Label831-642V00RB
Overall Dimensions (W x D x H)145cm x 199cm x 102cm
Suitable Mattress Size (W x D)135/137cm x 190cm (Double)
Headboard Size (W x H)145cm x 102cm
Footboard Size (W x H)145cm x 40cm
Under Bed Storage Clearance25.5cm
Weight Capacity300kg
MaterialsSteel, Particleboard
ColorRustic Brown, Black
Installation MethodAssembly Required
Package Dimensions (L x W x H)169cm x 47cm x 16cm
Package Weight26.8kg

User Tips

No specific user tips were available from reviews or Q&A for this product. However, general tips for bed frames include:

  • Consider using felt pads under the support legs if placing the bed on delicate flooring to prevent scratches.
  • If you experience any minor wobbling, ensure the bed is on a completely flat surface. Shims can be used under legs if the floor is uneven.
  • For easier assembly, organize all hardware by type and size before you begin.

Warranty and Support

For warranty information, replacement parts, or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: HOMCOM

Seller: Aosom MHSTAR UK Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.