1. Introduction
The SNDWAY SW 523 and SW 524 are digital sound level meters designed for accurate noise measurement in various environments. These devices are ideal for monitoring sound levels in homes, offices, industrial settings, and for assessing sound insulation. They feature a wide measurement range, high precision, and user-friendly operation.

2. Safety Information
- Read all instructions carefully before use.
- Do not attempt to disassemble or modify the device.
- Keep the device away from water and high humidity.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Use only the specified battery type (3x1.5VAAA).
- Dispose of batteries properly according to local regulations.
3. Package Contents
Please check the package for the following items:
- SNDWAY SW 523 or SW 524 Sound Level Meter
- Sponge Ball (Windscreen)
- User Manual (this document, also available as PDF)
- USB Cable (for SW-524 only)
4. Product Overview
Familiarize yourself with the components and features of your sound level meter.

Key Components:
- Sponge Ball: Reduces wind noise for more accurate readings.
- Condenser Microphone Sensor: 6mm miniature high-precision sensor with three sensitive conductive layers and a metal shell for durability.
- 1.62-inch Display: High-definition energy-saving screen with backlight.
- Measurement Keys: For adjusting settings and viewing data.
- A/C Key: Selects A-weighted or C-weighted measurement.
- Response Time Selection Key: Switches between FAST and SLOW response modes.
- Power Switch Key: Turns the device on/off.

Dual Analog Signal Output (SW-524 only):

- DC Output: 10mV/dB, Output impedance approximately 100 Ohm.
- AC Output: 0.65Vrms/full scale per gear, Output impedance approximately 6000 Ohm.
- USB Port: For computer communication and data transfer (SW-524 only).
Common Noise Range Chart:

Product Demonstration Video:
5. Setup
5.1 Battery Installation
The device requires 3x1.5VAAA batteries. To install:
- Locate the battery compartment on the back of the device.
- Open the battery compartment cover.
- Insert three 1.5VAAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
6. Operating Instructions
6.1 Power On/Off
Press the Power Switch Key (red button) to turn the device on or off.
6.2 Measurement Modes (A/C Weighting)
Press the A/C Key to switch between A-weighted and C-weighted measurements.
- A-weighted: Suitable for ambient noise measurement, mimicking human ear response.
- C-weighted: Suitable for mechanical noise measurement, providing a flatter frequency response.

6.3 Response Time (FAST/SLOW)
Press the FAST/SLOW Key to select the response time.
- FAST Mode: Default time value is 125ms, more sensitive for capturing sudden noise changes.
- SLOW Mode: Default time value is 1s, more stable for average noise levels.
6.4 MAX/MIN Hold
Press the MAX/MIN Key to toggle between displaying the maximum, minimum, or current sound level. This function helps capture peak and lowest noise readings over a period.
6.5 Backlight
Press the Backlight Key (light bulb icon) to turn the display backlight on or off for improved visibility in low-light conditions.
6.6 Measurement Range Adjustment
The device supports various measurement range gears, typically adjustable via the up/down arrow keys, such as 30-80dB, 50-100dB, 60-110dB, 80-130dB, and the full 30-130dB range. Adjust the range to suit the expected noise level for optimal accuracy.
6.7 Alarm Function (SW-524 only)
The SW-524 model allows you to set a high limit alarm value. If the measured sound level exceeds this limit, the instrument will automatically issue an alarm sound. Refer to the full PDF manual for detailed instructions on setting the alarm.

6.8 Data Storage and Computer Communication (SW-524 only)
The SW-524 model supports data storage and communication with a computer via a MicroUSB cable. It can store data continuously for up to 17 hours (1 stroke/second) or up to 61200 groups (1 group/minute). This allows for real-time sampling, downloading, storing records, and printing data.


7. Applications
The SNDWAY sound level meter is a versatile tool suitable for a wide range of noise measurement and monitoring tasks:

- Sound insulation material inspection
- Office noise detection
- Library noise detection
- Home appliance noise detection
- Car noise detection
- Machining noise detection
8. Specifications
Below are the technical specifications for the SNDWAY SW 523 and SW 524 models:

| Project | SW-523 | SW-524 |
|---|---|---|
| Accuracy | ±1.5dB (at reference sound pressure level, 94dB@1KHz) | |
| Frequency response | 31.5Hz~8.5KHz | |
| Dynamic Range | 50dB | |
| Measuring range | 30~130dBA, 35~130dBC | |
| Frequency Weighting Characteristics | A-weight and C-weight | |
| Digital display | 4 digits, resolution 0.1dB, sampling frequency 2 times/second | 3 and a half (524) |
| Dynamic scale display | 30~130dB (1 scale represents 2dB or 1dB) | |
| Overload indication | “OVER” and “UNDER” Symbolic representation | |
| AC signal output | ✓ | |
| DC signal output | ✓ | |
| Response time | FAST (fast) and SLOW (slow) | |
| Microphone | 6mm condenser microphone | |
| Size value lock | MAX and MIN | |
| Battery | 3x1.5VAAA | |
| Working temperature and humidity | 0~40℃, 10~80%RH | |
| Storage temperature and humidity | -10~60℃, 10~70%RH | |
| Time display | ✓ | |
| Storage function | 1 stroke/second, can be continuously stored for 17 hours (only 524) | |
| Communicate with computer | Communication with computer via MicroUSB (524 only) | |
| Alarm function | High limit alarm can be set (only 524) | |
| Size | 215mm*63.5mm*27mm | |
9. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Microphone Care: Always keep the sponge ball on the microphone to protect it from dust and physical damage.
- Durability: The device features a drop-proof, waterproof, and dust-proof design for enhanced durability.

10. Troubleshooting
- Device does not power on: Check if the batteries are installed correctly and have sufficient charge. Replace batteries if necessary.
- Inaccurate readings: Ensure the sponge ball is properly attached to the microphone. Avoid measuring in windy conditions without the sponge ball. Check for any obstructions to the microphone.
- Display issues: If the display is dim, check battery levels. If the display is blank or shows errors, try restarting the device.
- No data transfer (SW-524): Ensure the USB cable is securely connected to both the device and the computer. Verify that the correct software drivers are installed on your computer.
11. User Tips
- When precise measurements are critical, be aware of the device's accuracy tolerance of ±1.5dB.
- For quick, transient noise events, use the FAST response mode. For more stable, average noise levels, switch to SLOW mode.
- Utilize the MAX/MIN hold function to capture the highest and lowest noise levels during a monitoring period.
12. Warranty & Support
This product comes with a three-year guarantee. For detailed warranty information, technical support, or service inquiries, please refer to the official product documentation or contact the seller directly. A comprehensive user manual is available in PDF format for further reference.