Introduction
The Mortal Q8 Mini TV Stick is a compact and powerful streaming device designed to transform your television into a smart entertainment hub. Running on the latest Android 14.0 OS and powered by the Allwinner H313 chip, it supports stunning 4K video decoding, dual-band Wi-Fi 6, and Bluetooth 5.0 for seamless connectivity. Enjoy your favorite streaming services like YouTube and Netflix, utilize intelligent voice control, and share content from your mobile devices with ease.
Important Safety Information
Read all safety information before using the device. Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
Battery Safety (for Remote Control)
- The remote control requires AAA-sized batteries for use.
- Only use new 1.5V alkaline or 1.2V NiMH rechargeable AAA-sized batteries.
- Never mix old and new batteries.
- Keep all batteries out of the reach of children.
- If any batteries begin to leak, prevent fluid contact with skin or clothes as it can be corrosive and toxic. Remove batteries and clean the compartment according to manufacturer's recommendations.
General Device Safety
- Do not expose your device or adapter to liquids.
- If the device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for them to dry completely before plugging them in again.
- Do not attempt to dry your device or adapter with an external heat source (e.g., microwave oven, hair dryer).
- If the device or adapter appear damaged, discontinue use immediately.
- Use only accessories supplied with the device to power it.
- The device may get warm during normal use. Place it on a heat-resistant surface. If it becomes hot to the touch, unplug it and let it cool down for a few minutes before handling.
- Install the power adapter into an easily accessible socket-outlet located near the equipment.
Setup Guide
1. Connect the TV Stick
- Connect one end of the HDMI cable to the HDMI port of the TV Stick, and the other end to an available HDMI port on your TV.
- Optional: Use the included HDMI extender cable if it's difficult to plug the TV Stick directly into your TV's HDMI port.
- Connect the USB power cable to the TV Stick's Type-C Power port.
- Connect the other end of the USB power cable to the power adapter (5V, 2A recommended), then plug the adapter into a power outlet.
- Important: Ensure the HDMI cable is connected to the TV Stick before connecting the power adapter. Incorrect connection may cause issues like screen freeze, distortion, or insufficient signal.
- Turn on your TV and switch to the appropriate HDMI input source using your TV's remote control.
2. Set Up the Remote Control
- Open the back of the remote control and insert the included AAA batteries, ensuring correct polarity.
- Follow the on-screen instructions on your TV to pair your voice remote control.
- For Voice Remote Bluetooth Pairing:
a. Click the voice button on the remote to display the pairing prompt interface on your TV.
b. Press and hold the button on the remote according to the prompt interface until the TV screen automatically exits the pairing prompt interface. This indicates successful pairing with Google Assistant.
c. Release the button. You can then click the voice button again, and a voice bar prompt will appear. Long press the voice button and speak your command. Release the button, and Google Assistant will execute your command. - If the remote isn't pairing, press and hold the Home button until the LED flashes, or try reinserting the batteries.
3. Connect to the Internet
- Once the TV Stick is powered on and connected to your TV, navigate to the network settings.
- Select your Wi-Fi network from the list and enter the password to connect.
- Once connected, you can begin streaming content.
Operating Instructions
Navigating the Interface
Use the directional pad and select button on your remote control to navigate through the Android TV interface. The Home button will return you to the main screen, and the Back button will take you to the previous screen.
Using Voice Control
The Mortal Q8 Mini TV Stick features intelligent voice control. Simply press the Google Assistant button on your remote and speak your commands to find, play, and control content. This makes operation more convenient, especially for searching for specific shows or movies.
Streaming Content (e.g., Netflix)
- After connecting to Wi-Fi, open the desired streaming application (e.g., Netflix) from the home screen.
- If a login interface appears, click the mouse switch button on the remote control to activate mouse mode. Use the mouse pointer to click the login button within the application.
- Click the mouse button again to switch back to remote control mode, then enter your account credentials to log in.
- Use the mouse mode of the remote control to select and play videos.
Multi-Screen Sharing (Chromecast Built-in)
The device supports Chromecast Built-in, Airplay, DLNA, and Miracast, allowing you to easily cast movies, shows, photos, and games from your Android or iOS device to your TV. Look for the cast icon within compatible apps on your mobile device.
Remote Control Mouse Mode
To switch the remote control to mouse mode for easier navigation in certain applications:
- Click the dedicated mouse button on the remote control. A mouse arrow should appear on the TV screen.
- Once the mouse arrow appears, use the directional keys on the remote to control its movement.
- Click the mouse button again to exit mouse mode.
Maintenance
Cleaning
- Unplug the device and remote control before cleaning.
- Use a soft, dry, lint-free cloth to clean the device.
- Do not use abrasive cleaners, solvents, or aerosol sprays.
Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove batteries from the remote control.
Recycling
In some areas, the disposal of certain electronic devices is regulated. Please dispose of or recycle your device in accordance with your local laws and regulations.
Troubleshooting
- The signal receiving light of the TV stick flashes, and the TV screen turns on in a loop.
- This usually indicates that the power supplied to the device is less than 5V, 2A. Please ensure you are using a 5V, 2A power adapter to power the TV Stick.
- The voice remote control Bluetooth pairing interface appears on the TV stick, but the remote control does not respond.
- If you have an infrared-only remote, simply press the return button on the remote to exit the pairing interface. The remote should then function normally. If you have a voice remote, follow the on-screen prompts to perform Bluetooth pairing by pressing and holding the specified button(s) until the pairing interface automatically exits.
- The remote control cannot navigate on some applications.
- This is a common issue for Android TV sticks, as some applications are designed primarily for touchscreens or mouse input. You can connect an external mouse or wireless keyboard to control these applications, or use the remote control's built-in mouse mode (refer to the 'Remote Control Mouse Mode' section in Operating Instructions).
- The TV stick needs to be restarted after using it for a period of time.
- This could be due to incompatible applications or corrupted data. It is recommended to perform a "factory reset" through the device settings. Note that a factory reset will erase all personal data and installed applications.
Specifications
| Feature | Description |
|---|---|
| Model Number | Q8 |
| Item Type | TV Stick |
| Operation System | Android 14.0 |
| Processor (SoC) | Allwinner H313 (Quad Core ARM Cortex A53 CPU, ARM G31 MP2 GPU) |
| Decode Ability | 4K@60fps (H.265 Video Decoding), 1080P (Full-HD) |
| HDR Support | HDR10+ |
| RAM | 2GB DDR3 |
| Internal Storage | 8GB or 16GB eMMC (depending on variant) |
| Wi-Fi | Dual Band (2.4G & 5.8G), Wi-Fi 6, Internal Antenna |
| Bluetooth | Bluetooth 5.0 |
| Connectors | HDMI-Compatible, Type-C Power, USB 2.0, Infrared interface |
| Functions | IR Control, Multiple-Input Single-Output, Chromecast Built-in (Airplay, DLNA, Miracast) |
| Remote Control | Included (Voice Remote) |
| Built-in Speaker | No |
| Built-in Battery | No |
| Electrical Rating (TV Stick) | 5.25V 1.0A |
| Electrical Rating (Remote) | 3.0V (2 AAA Batteries) |
| Operating Temperature | 0-35°C (32-95°F) |
| Certifications | CE, FCC, RoHS |
| Dimensions (TV Stick) | Length: 97mm, Width: 30mm, Thickness: 10mm (body), 9mm (HDMI connector) |
| Package Dimensions | 19cm (L) x 13cm (W) x 3cm (H) |
| Package Weight | 0.202 kg |
User Tips
- Optimal Power Supply: Always use a 5V, 2A power adapter for the TV Stick to prevent issues like screen flickering or signal loss.
- Connection Order: Connect the HDMI cable to the TV Stick and TV first, then connect the power adapter to the TV Stick.
- App Navigation: For apps not optimized for TV remotes, switch to the remote's mouse mode or connect a USB mouse/keyboard for easier navigation.
- Performance Issues: If you experience frequent restarts or performance degradation, consider performing a "factory reset" through the device settings to resolve potential software conflicts or corrupted data.
Warranty and Support
Warranty Information
Please refer to the seller's terms and conditions or contact the point of purchase for specific warranty details regarding your Mortal Q8 Mini TV Stick.
Regulatory Compliance (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The device meets the FCC Radio Frequency Emission Guidelines. It should be installed and operated with at least 20 cm between the radiator and your body.
Additional Resources
For a detailed user manual in PDF format, you may refer to the official document: Mortal Q8 Mini TV Stick User Manual (PDF)