Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your STC QLED Android Car Audio Head Unit. This universal car radio features a high-resolution QLED display, runs on Android 12, and offers advanced functionalities such as Carplay, GPS navigation, and various multimedia options. Please read this manual thoroughly before using the device to ensure proper function and safety.

The STC QLED Android Car Audio Head Unit, showcasing its sleek design and user interface.
Setup and Installation
Professional installation is highly recommended for this car audio head unit to ensure correct wiring and optimal performance. Incorrect installation can lead to damage to the unit or your vehicle's electrical system.
Included Components
- 1 x QLED Android Car Audio Head Unit
- 1 x Reverse Camera
- 1 x Power Cable
- 1 x Video Cable
- 1 x GPS Antenna
- 2 x USB Cables
- 4 x Mounting Screws
Wiring Diagram
Refer to the following diagram for proper connection of the head unit to your vehicle's electrical system and peripherals.

Wiring diagram for connecting the head unit to various components.
- Main Power Cable
- AMP-CTRL (Amplifier Control Cable)
- AUX R IN (Audio Input Right)
- RAC OUT FR (Front Right Audio Output)
- AUX L IN (Audio Input Left)
- RCA OUT FL (Front Left Audio Output)
- MIC (Microphone)
- SUB WOOF (Subwoofer Output)
- CVBS - in (Rear Camera Input)
- 4-pin USB Port
- 6-pin USB Port
- CAMERA (Camera Input)
- BRAKE (Brake-in Cable)
- WIFI Antenna
- BT Antenna (Bluetooth Antenna)
Rear Panel Connections
The rear panel of the head unit provides dedicated ports for essential connections:

Rear panel connections for power, audio/video, GPS, and radio antennas.
- Power plug
- Audio and video Output
- GPS antenna
- Radio antenna
Operating Instructions
Your STC QLED Android Head Unit offers a wide range of features for an enhanced in-car experience.
Basic Functions
- Power On/Off: Press and hold the power button on the unit or remote control.
- Volume Control: Use the volume buttons on the unit, steering wheel controls (if configured), or the touchscreen interface.
- Navigation: Access your preferred navigation app (e.g., Google Maps, Sygic, Waze, Here WeGo) directly from the home screen.
- Radio: Tune into AM/FM radio stations using the built-in radio application.
Connectivity

Screen Mirroring and Bluetooth 4.1 features.

Built-in Wi-Fi and AHD camera support.
- Screen Mirroring: This feature allows you to display your smartphone's screen content (music, video, navigation, internet browser) directly onto the head unit.
- Bluetooth 4.1: Connect your smartphone via Bluetooth for hands-free calling, phonebook synchronization, and wireless music streaming.
- Built-in Wi-Fi: Connect to the internet by using your mobile device as a hotspot, enabling online navigation, app downloads, and web browsing.
- USB Ports: Use the provided USB ports for media playback, charging devices, or connecting other USB accessories.
Multimedia and Audio

Audio settings for 12-band EQ and Fader/Balance.

Navigation app selection and various UI screens.
- 12 Bands EQ: Customize your audio experience with a 12-band equalizer. Choose from 7 preset modes (Pop, Rock, Jazz, Class, Nor, New, User) or manually adjust frequencies from 60Hz to 15kHz.
- Fader and Balance: Adjust the audio fader and balance by dragging a crosshair on a visual representation of your car's interior on the touchscreen.
- Video Playback: The unit supports 1080P video playback, providing a great visual experience.
User Interface (UI)
The head unit features a customizable Android UI with various themes. You can navigate through the home page, applications, radio, car settings, and other functions using the intuitive touchscreen controls.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the QLED touchscreen. For stubborn smudges, lightly dampen the cloth with a screen cleaner solution. Avoid harsh chemicals or abrasive materials.
- Software Updates: Periodically check for software updates through the unit's settings menu or the manufacturer's website to ensure optimal performance and access to new features.
- General Care: Keep the unit free from dust and extreme temperatures. Ensure all connections are secure and free from corrosion.
Troubleshooting
If you encounter issues with your head unit, refer to the following common problems and solutions:
- No Power: Check the main power cable connection and ensure the vehicle's ignition is on. Verify the fuse in the power circuit.
- No Sound: Check speaker connections, volume levels, and audio source selection. Ensure the amplifier control cable (AMP-CTRL) is correctly connected if using an external amplifier.
- GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky. Move the vehicle to an open area if necessary.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the head unit and your mobile device. Try unpairing and re-pairing the devices.
- Touchscreen Unresponsive: Try restarting the unit. If the issue persists, a factory reset might be necessary (note: this will erase all user data).
- Rear Camera Not Displaying: Verify the CVBS-in and CAMERA connections. Ensure the BRAKE-in cable is correctly wired to detect reverse gear engagement.
For persistent issues not covered here, please contact customer support.
Specifications
Specifications may vary slightly depending on the specific configuration (RAM/ROM) and screen size (9-inch or 10-inch) of your model.
| Feature | Description |
|---|---|
| Brand Name | STC |
| Model Number | DWTS7227 |
| Type | Build-in 2DIN, Build-in 1DIN |
| Placement | Dashboard |
| Screen Size | 9 inch, 10 inch (10.1 inch for some variants) |
| Screen Type | IPS, Capacitive Touch Screen, 2.5D Screen |
| Resolution | 1280*720 (as per title), 1024*600 (common variant) |
| Operating System | Android 12 (as per title), Android 10 (common variant) |
| CPU | Quad-core 1.3GHz to Octa-core 1.8GHz (varies by model) |
| RAM/ROM | 8GB RAM / 258GB ROM (as per title), other configurations available (e.g., 1G/16G, 2G/32G, 4G/64G, 6G/128G) |
| Connection | USB, Built-in WiFi, Bluetooth |
| Bluetooth Version | 4.0 / 5.0 (varies by model) |
| Wi-Fi | Built-in (2.4G / 2.4G+5G for some models) |
| GPS | Built-in GPS Navigation System |
| Carplay / Android Auto | Optional (Wired/Wireless, varies by model) |
| AHD Camera Support | Yes |
| DSP EQ | 12-band or 48-band (varies by model) |
| Video Support | 1080P |
| Multi-languages | Supported |
| Place of Origin | Guangdong, China |
For detailed specifications of specific models (TC7, TC3, TC5, TC18, TC10), please refer to the product comparison table provided by the seller.

Model comparison table highlighting varying specifications across different configurations.
User Tips
- Professional Installation: Always opt for professional installation to avoid wiring errors and ensure optimal performance and safety.
- Regular Software Updates: Keep your unit's software updated to benefit from the latest features, bug fixes, and performance improvements.
- Screen Protection: Consider using a screen protector to prevent scratches and maintain the clarity of your QLED display.
- Safe Driving: While the head unit offers many features, always prioritize safe driving. Avoid operating complex functions while the vehicle is in motion.
Warranty and Support
Your STC QLED Android Car Audio Head Unit comes with a 1-year warranty, with a 365-day quality guarantee. This covers manufacturing defects and ensures the product meets quality standards.
For any technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact the seller or manufacturer's customer support. Have your model number (DWTS7227) and purchase details ready when contacting support.