VTOMAN V10 PRO

Contents

VTOMAN V10 PRO 4500A Car Jump Starter User Manual

Model: V10 PRO

1. Introduction

The VTOMAN V10 PRO 4500A Car Jump Starter is a powerful and versatile device designed to provide emergency jump-starting for 12V vehicles, serve as a portable power bank for electronic devices, and offer emergency lighting. With its robust 4500A peak current, it can jump start a wide range of vehicles, including all gasoline engines and diesel engines up to 10.0 liters.

2. Safety Information

Your safety is paramount. The VTOMAN V10 PRO incorporates 10 advanced safety technologies to ensure safe and reliable operation. Always follow these guidelines:

  • Ensure proper connection of the jump starter clamps to the vehicle battery terminals.
  • Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
  • Keep the device away from children.
  • Do not immerse the device in water.
  • Avoid exposing the device to extreme temperatures outside its operating range (-4°F to 140°F / -20°C to 60°C).
  • The enhanced jump cable indicator uses a reverse red light to notify you of incorrect usage, preventing incorrect connections or sparks.

Integrated Safety Protections:

  • AI Software Protection
  • Reverse-Polarity Protection
  • Over-Charge Protection
  • Over-Voltage Protection
  • Short-Circuit Protection
  • High and Low-Temperature Protection
  • Over-Current Protection
  • Over-Load Protection
  • Spark-Proof Protection
  • Reverse-Charge Protection
Close-up of VTOMAN V10 PRO jump starter clamps, illustrating 10 advanced safety technologies.
Figure 2.1: The jump starter clamps highlighting the 10 advanced safety technologies for user protection.
Diagram showing the internal intelligent safety technology of the jump starter.
Figure 2.2: Illustration of the improved intelligent safety technology integrated into the device.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact customer support.

  • 1 x VTOMAN V10 PRO Car Jump Starter
  • 1 x Jump Starter Cable (with smart clamps)
  • 1 x USB-A to Type-C Cable
  • 1 x Type-C to Type-C Cable
  • 1 x Storage Case
  • 1 x User Manual
VTOMAN V10 PRO Jump Starter, smart clamps, and carrying case.
Figure 3.1: The VTOMAN V10 PRO Car Jump Starter with its included accessories and carrying case.
Portable and compact carrying case for the jump starter.
Figure 3.2: The portable and compact carrying case for easy transport and storage.

4. Product Overview (Components)

Familiarize yourself with the different parts and ports of your VTOMAN V10 PRO jump starter:

Labeled diagram of the VTOMAN V10 PRO jump starter ports and features.
Figure 4.1: Detailed view of the jump starter's ports and controls.
  • Jump Start Socket: Port for connecting the smart jump cables.
  • Indicator Switch: Button to activate the jump start function or check battery level.
  • USB-C Input (Output) Port: For charging the jump starter or charging compatible devices (PD15W).
  • USB 5V 2.4A Output Port: Standard USB-A port for charging electronic devices.
  • Quick Charge Output Port: USB-A port with Quick Charge capabilities for faster device charging.
  • LED Flashlight: Integrated light for illumination.
  • 15V 10A Output Port: DC output for powering compatible 12V accessories like air compressors or car refrigerators.

5. Charging the Jump Starter

Before first use, fully charge your VTOMAN V10 PRO. It takes approximately 5 hours to fully charge.

Charging Methods:

  • At Home: Use the provided USB-C to Type-C cable with a compatible wall charger (not included) connected to the USB-C Input port.
  • In Car: Use the provided USB-A to Type-C cable with a compatible car charger (not included) connected to the USB-C Input port.

The LED indicators on the jump starter will show the charging progress. All four LEDs will be solid when fully charged.

VTOMAN V10 PRO jump starter being charged at home via a wall adapter.
Figure 5.1: Charging the jump starter at home. (Wall charger not included)
VTOMAN V10 PRO jump starter being charged in a car via a car charger.
Figure 5.2: Charging the jump starter in a car. (Car charger not included)

6. Operating Instructions (Jump Starting)

The VTOMAN V10 PRO can jump start 12V vehicles, including all gasoline engines and up to 10.0 liters diesel engines. It can provide up to 70 starts on a single charge.

Regular Mode Jump Start:

  1. Insert: Plug the smart jump cables into the Jump Start Socket on the VTOMAN V10 PRO.
  2. Connect: Attach the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the vehicle's negative (-) battery terminal. The indicator on the smart clamp should show a solid green light.
  3. Start Your Vehicle: Once the green light is solid, start your vehicle's engine.
  4. Disconnect: After the vehicle starts, immediately remove the clamps from the battery terminals, then disconnect the smart cables from the jump starter.
Three-step diagram for regular mode jump starting: Insert, Connect (green light), Start your vehicle.
Figure 6.1: Steps for jump starting a vehicle in Regular Mode.

Boost Mode Jump Start (for totally dead batteries):

If your vehicle's battery is completely dead or its voltage is too low to be detected by the regular mode, use the Boost Mode.

  1. Insert: Plug the smart jump cables into the Jump Start Socket on the VTOMAN V10 PRO.
  2. Connect: Attach the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the vehicle's negative (-) battery terminal. The indicator on the smart clamp may flash green.
  3. Use Boost Function: Press and hold the "BOOST" button on the smart clamp for 3 seconds until the indicator light turns solid green.
  4. Start Your Vehicle: Within 30 seconds of activating Boost Mode, start your vehicle's engine.
  5. Disconnect: After the vehicle starts, immediately remove the clamps from the battery terminals, then disconnect the smart cables from the jump starter.
Four-step diagram for boost mode jump starting: Insert, Connect (flash green light), Use boost function, Start your vehicle.
Figure 6.2: Steps for jump starting a vehicle using Boost Mode for completely dead batteries.
VTOMAN V10 PRO jump starter in an engine bay, showing its capability to jump start various vehicles.
Figure 6.3: The VTOMAN V10 PRO is suitable for jump starting a wide range of 12V vehicles.
Image showing the VTOMAN V10 PRO's super powerful start-up performance for various engine sizes.
Figure 6.4: Super powerful start-up performance for various engine types and sizes.

7. Using as a Portable Power Bank

The VTOMAN V10 PRO can also function as a versatile power bank to charge your electronic devices.

Output Ports:

  • USB-C/PD15W: For fast charging compatible devices like tablets and phones.
  • Dual USB-A/Quick Charging: For charging a wide range of USB-powered devices.
  • 15V/10A DC Output: For powering 12V accessories such as air compressors, car refrigerators, and more.
VTOMAN V10 PRO jump starter charging a laptop, tablet, phone, and earbuds.
Figure 7.1: The jump starter functioning as a power bank to charge multiple electronic devices.
Jump starter battery pack showing its ability to charge various devices like phones, pads, kindles, watches, and pods.
Figure 7.2: The jump starter's capability to charge a wide array of personal electronic devices.

8. LED Flashlight Functions

The integrated 400-lumen LED flashlight provides illumination for emergencies or outdoor activities.

Flashlight Modes:

  • Normal: Standard steady illumination.
  • Strobe: Flashing light for signaling or disorientation.
  • SOS: International Morse code signal for distress.

To cycle through the modes, press the flashlight button repeatedly.

VTOMAN V10 PRO jump starter used as a flashlight in an emergency or camping scenario.
Figure 8.1: The jump starter's flashlight function for emergency and camping use.
400 lumen LED flashlight with multiple modes: Normal, Strobe, and SOS.
Figure 8.2: The 400-lumen LED flashlight offering multiple modes for various situations.

9. Maintenance and Storage

Proper maintenance and storage will extend the lifespan of your VTOMAN V10 PRO.

  • Charging: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health.
  • Automatic Power Down: The device will automatically power down after 10 seconds of inactivity to preserve power, ensuring a standby time of up to 24 months.
  • Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
  • Storage: Store the jump starter in its sturdy case in a cool, dry place, away from direct sunlight and extreme temperatures. It is designed to work in extreme weather conditions from -4°F to 140°F (-20°C to 60°C).
VTOMAN V10 PRO jump starter showing 24 months standby time.
Figure 9.1: The jump starter boasts an impressive 24-month standby time.
VTOMAN V10 PRO jump starter shown in a snowy and desert environment, indicating its ability to work in extreme weather from -4°F to 140°F.
Figure 9.2: Designed to operate reliably in extreme weather conditions.

10. Troubleshooting

  • Jump Starter Not Working: Ensure the jump starter is adequately charged. Check the battery level indicators.
  • Vehicle Not Starting: Double-check that the smart clamps are correctly connected to the vehicle battery terminals (red to positive, black to negative). If the battery is completely dead, try using the Boost Mode.
  • Smart Clamp Indicator Shows Red Light: This indicates an incorrect connection or a fault. Disconnect the clamps and re-attach them correctly. Refer to the safety information for details on protection features.
  • Device Not Charging: Ensure the charging cables and power source are working correctly. Try a different cable or adapter.

11. Specifications

CategoryDetail
BrandVTOMAN
TypeCar Jump Starter
ModelV10 PRO
ColorYellow
Rated Current4500A
CompatibilityFor 12V Vehicles (including all gasoline and up to 10.0 liters diesel engines)
Battery Capacity3000 - 5000 mAh
Package Weight640g
Package Size (L x W x H)230 x 94 x 35 mm
Operating Temperature-4°F to 140°F (-20°C to 60°C)
LED Flashlight Output400 Lumens (Normal, Strobe, SOS modes)
USB-C Input/OutputPD15W
USB-A Output5V 2.4A, Quick Charge
DC Output15V 10A

12. User Tips

  • Always ensure your jump starter is fully charged before embarking on a long trip or storing it for an extended period.
  • Keep the smart clamps clean and free of debris to ensure optimal conductivity.
  • In extremely cold weather, keep the jump starter inside the vehicle cabin rather than the trunk to maintain its internal temperature for better performance.

13. Warranty and Support

The VTOMAN V10 PRO Car Jump Starter comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.