Petgravity Smart Pet Water Fountain 3L/100oz

Contents

Petgravity Smart Pet Water Fountain 3L/100oz

Automatic Cat and Small Dog Drinking Dispenser

Introduction

Thank you for choosing the Petgravity Smart Pet Water Fountain. This innovative pet drinking solution is designed to provide your beloved cats and small dogs with fresh, clean water consistently. Featuring a unique water and electricity separation design for enhanced safety, a self-refill structure, and a filter-free operation, it ensures every sip your pet takes is clean and healthy. Its wireless design and large 3L capacity offer convenience and peace of mind, even when you're away.

Product Overview

Components

  • 1x Main Unit (Host)
  • 1x Clean Water Tank (3L capacity)
  • 1x Water Bowl
  • 1x Wastewater Tank
  • 1x USB Charging Cable (Type-C)
  • 1x Instruction Manual

Key Features

  • Water and Electricity Separation: Ensures maximum safety for your pets.
  • Self-Refill Structure: Automatically dispenses fresh water into the bowl after dirty water is drained.
  • Filter-Free Design: Eliminates the need for filter replacements, saving cost and maintenance.
  • Wireless Operation: Built-in 2000mAh rechargeable battery provides up to 180 days of use on a full charge, allowing flexible placement without power cords.
  • 3L Large Capacity: Sufficient water supply for extended periods, ideal for multi-pet households or when you're away.
  • Ultra-Quiet Operation: Operates at approximately 45 decibels, minimizing disturbance.
  • Smart Indicators: LED lights provide reminders for low battery, incorrect installation, insufficient clean water, or a full wastewater tank.
  • Food-Contact Grade Materials: Constructed from safe, high-quality PC and ABS plastics.
  • Adjustable Water Output: Customize water volume (80ml, 100ml, 120ml) and interval (3h, 4h, 6h) to suit your pet's habits.
Petgravity Smart Pet Water Fountain assembled
The Petgravity Smart Pet Water Fountain, fully assembled.

Setup Instructions

  1. Unpack Components: Carefully remove all parts from the packaging.
  2. Assemble the Fountain: The main unit, clean water tank, wastewater tank, and water bowl are designed with a snap-on structure for easy assembly. Ensure all parts are securely connected.
  3. Charge the Device: Locate the Type-C charging port on the main unit (usually covered by a rubber flap). Connect the provided USB charging cable to the port and a suitable power adapter (not included). A full charge takes approximately 4 hours and provides up to 180 days of battery life. The battery indicator light will flash blue during charging and turn solid green when fully charged.
    Diagram showing Type-C charging port and indicator lights
    Charging port and indicator lights for battery and tank status.
  4. Fill the Clean Water Tank: Remove the clean water tank and fill it with fresh water. The tank has a 3L capacity. Reattach it securely to the main unit.
  5. Initial Placement: Place the assembled fountain in a desired location. Thanks to its wireless design, it can be placed anywhere without needing a nearby power outlet.
    Diagram showing flexible placement options in different rooms
    Wireless operation allows flexible placement in various rooms.

Operating Instructions

Control Panel Overview

Control panel with volume and time interval settings
Detailed view of the control panel with settings and indicators.
  • Volume Settings: Select desired water output per cycle: 80ml, 100ml, or 120ml.
  • Time Interval Settings: Choose the frequency of water dispensing: 3 hours, 4 hours, or 6 hours.
  • Indicator Lights:
    • Battery Indicator: Solid Red (Low battery), Flashing Blue (Charging), Solid Green (Charging completed), Solid Yellow (Abnormal operation of water bowl).
    • Cleanwater Tank Indicator: Solid Red (Cleanwater tank not installed or insufficient water left).
    • Wastewater Tank Indicator: Solid Red (Wastewater tank not installed or wastewater tank is full).
  • Unlock/Refresh Button: Long touch to unlock the control panel. Short touch to manually refresh the water in the bowl.

Setting Water Output and Frequency

To set the water volume and time interval, simply tap the corresponding buttons on the control panel. Adjust these settings based on your pet's drinking habits and the number of pets using the fountain. For example, a cat typically needs to drink 40-60ml of water per kilogram of body weight per day.

Automatic Water Change Cycle

The fountain operates on a pour-over design. When a water dispensing cycle is initiated (either automatically based on your set interval or manually via the refresh button):

  1. The remaining water in the water bowl is automatically poured into the separate wastewater tank.
  2. Fresh water from the clean water tank is then dispensed into the water bowl.
Diagram illustrating the self-refill water change process
The self-refill structure ensures fresh water is always available.

Video: Demonstration of the automatic water change, cat drinking, charging, and cleaning process.

Maintenance

Regular cleaning is essential to maintain hygiene and prevent biofilm formation.

  1. Empty Wastewater Tank: Regularly check and empty the wastewater tank. The frequency will depend on usage, but regular emptying is recommended to inhibit biofilm formation.
  2. Clean Components: The water bowl, clean water tank, and wastewater tank are easily detachable for cleaning. Wash them with mild soap and water, then rinse thoroughly.
  3. Wipe Main Unit: Wipe the main unit with a damp cloth. Do not submerge the main unit in water due to its electronic components.
  4. No Filter Replacement: This fountain does not require filter replacements, simplifying maintenance.

Troubleshooting

  • Fountain Not Dispensing Water:
    • Check the Cleanwater Tank Indicator. If solid red, the tank might be empty or incorrectly installed. Refill or re-install the tank.
    • Check the Battery Indicator. If solid red, the battery is low. Recharge the fountain.
  • Water Bowl Operation Abnormal:
    • If the Battery Indicator is solid yellow, there is an abnormal operation with the water bowl. Ensure the water bowl is correctly seated and free from obstructions.
  • Wastewater Tank Full:
    • If the Wastewater Tank Indicator is solid red, the tank is full or incorrectly installed. Empty and re-install the wastewater tank.
  • Control Panel Unresponsive:
    • Ensure the panel is unlocked by a long touch on the 'Unlock/Refresh' button.

Specifications

FeatureDetail
ModelSmart Pet Water Fountain
Capacity3 Liters (100 oz)
Battery2000mAh Rechargeable (up to 180 days standby)
ChargingUSB Type-C (4 hours for full charge)
MaterialFood-Contact Grade PC (Clean Water Tank), Food-Contact Grade ABS (Water Bowl)
Noise LevelApprox. 45 dB
Max/Min Water Output100g (per cycle)
Dimensions (L x W x H)330mm (12.99 in) x 235mm (9.25 in) x 250mm (9.84 in)
LCD DisplayYes
Time SettingYes
Dimensions of the Petgravity Smart Pet Water Fountain
Product dimensions for planning placement.

User Tips

  • Optimal Placement: While the fountain is wireless, consider placing it in an area where your pet cannot easily reach the touch control panel, especially if your pet is prone to interacting with buttons.
  • Wastewater Tank Monitoring: The frequency of emptying the wastewater tank depends on your pet's drinking habits and the environment. Monitor the red indicator light for the wastewater tank, but also visually check it regularly to ensure optimal hygiene.
  • Hydration Guidelines: Remember that a cat typically needs to drink 40-60ml of water per kilogram of body weight per day. Adjust the fountain's water volume and interval settings accordingly to meet your pet's specific hydration needs.

Warranty & Support

For any use or quality problems with your Smart Pet Water Fountain, please contact the seller or manufacturer's customer support for timely resolution. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.