Petgravity 3L Smart Wireless Pet Water Fountain

Contents

Petgravity 3L Smart Wireless Pet Water Fountain User Manual

Model: 3L Smart Wireless Pet Water Fountain

1. Product Introduction

The Petgravity 3L Smart Wireless Pet Water Fountain is designed to provide your pets with fresh, clean water continuously. It features an innovative self-refill system that separates clean water from wastewater, eliminating the need for traditional filters and reducing ongoing costs. Its wireless design, powered by a long-lasting rechargeable battery, allows for flexible placement anywhere in your home. With a large 3L capacity, it ensures your pet stays hydrated for several days.

Key Features:

  • Revolutionary Self-Refill Design: Discards stagnant water and refills with fresh water.
  • Filter-Free Operation: No messy filters or expensive replacements needed.
  • Hygienic Dual-Tank System: Separate clean and wastewater tanks minimize bacterial buildup.
  • Cordless Convenience: Powered by a Type-C rechargeable battery, offering up to 180 days of operation per charge. Functions during power outages.
  • Large 3L Capacity: Meets pet's drinking needs for 3–9 days.
  • Ultra-Quiet Operation: Low-noise design for a peaceful environment.
  • Food-Grade Material: Constructed from food-grade PC material and Stainless Steel 304 for the bowl.
  • Electro-Water Isolation Structure: Minimizes static electricity risks.
  • Child Lock: Prevents accidental operation.

Product Components:

The water fountain consists of the following main parts:

  • Main Unit (Host)
  • Clean Water Tank
  • Clean Water Tank Lid
  • Water Bowl (Stainless Steel or other material depending on variant)
  • Waste Water Tank
  • Waste Water Tank Lid
  • USB Charging Cable (Type-C)
  • Instruction Manual (this document)
Diagram of the Petgravity water fountain showing clean water tank, main unit, water bowl, and waste water tank.
Figure 1: Innovative Dual-Tank System with Cleanwater Tank, Wastewater Tank, and Food Grade Stainless Steel 304 bowl.
Components of the water fountain laid out, highlighting food-grade materials and electro-water isolation.
Figure 2: Food Grade Material and Electro-Water Isolation Structure for safety.

2. Safety Instructions

  • Ensure the water fountain is placed on a stable, level surface to prevent tipping.
  • Do not immerse the main unit (with electronic components) in water.
  • Keep the charging port dry and clean. Only charge the device when it is turned on.
  • Keep out of reach of small children to prevent accidental operation or damage.
  • Use only the provided Type-C USB charging cable.
  • Do not use abrasive cleaners or harsh chemicals on any part of the fountain.
  • Regularly check for any damage to the components or charging cable. Discontinue use if damaged.
  • This device is designed for indoor use only.
  • The water dispenser can only be charged when it is turned on.

3. Setup

3.1 Unpacking and Initial Inspection

Carefully remove all components from the packaging. Check for any signs of damage. Ensure all parts listed in the "Product Components" section are present.

3.2 Assembly

  1. Place the Main Unit on a stable surface.
  2. Attach the Clean Water Tank to the Main Unit. Gently press to ensure it fits securely.
  3. Place the Clean Water Tank Lid on top of the Clean Water Tank.
  4. Install the Waste Water Tank at the front base of the Main Unit and cover it with its lid tightly.
    • Important: Make sure the float valve on the bottom of the tank is correctly positioned. Otherwise, the light will blink.
    • Important: Make sure the lid is tightly covered with the tank. Otherwise, the light will blink.
  5. Install the Water Bowl into the designated slot on the Main Unit, aligning it with the unlock switch.
Video 1: Product demonstration including assembly steps, water filling, and operation.

3.3 Initial Charging

  1. Open the silicone cover on the side of the Main Unit to reveal the Type-C charging port.
  2. Ensure the device is switched ON.
  3. Connect the provided Type-C USB charging cable to the port and plug the other end into a suitable USB power adapter (not included).
  4. The battery indicator light will show charging status. Fully charge the fountain before first use.
  5. Once charged, close the silicone cover to protect the port from water.

3.4 Filling the Clean Water Tank

  1. Remove the Clean Water Tank Lid.
  2. Pour clean drinking water into the Clean Water Tank, up to the "MAX" line (3L capacity).
  3. Replace the Clean Water Tank Lid securely.

4. Operating Instructions

4.1 Power On/Off

Locate the power switch, usually under a silicone cover near the charging port. Switch it to the ON position to power on the device.

4.2 Touchscreen Interface

The top of the Main Unit features a touchscreen interface for controlling the fountain's settings.

Touchscreen interface showing Volume and Time Interval settings, along with Unlock/Refresh, Clean Water, Waste Water, and Battery indicators.
Figure 3: Operation Interface with Volume and Time Interval controls.

4.3 Unlocking the Screen

Long press the "Unlock" button on the touchscreen to unlock the screen and enable adjustments.

4.4 Setting Water Volume and Time Interval

You can customize the water dispensing volume and frequency according to your pet's habits:

Cat Number Time Interval Volume
1 Cat 6H 80ML/100ML
2 Cats 4H 100ML/120ML
3+ Cats 3H 100ML/120ML

Note: The water refilling volume and interval can be set according to the actual situation. The above are just general guidelines for common adult cats.

Tap the "Volume" and "Time Interval" icons on the touchscreen to cycle through the available options and select your desired settings.

4.5 Dispensing Water Manually

To dispense water with a single click, ensure the screen is unlocked and press the "Refresh" button (short touch).

4.6 Indicator Lights

The touchscreen also displays various indicator lights:

  • Volume Indicator Light: Shows selected water volume.
  • Time Interval Light: Shows selected time interval.
  • Battery Indicator Lights: Displays current battery level.
  • Clean Water Indicator Light: Indicates status of the clean water tank.
  • Waste Water Indicator Light: Indicates status of the waste water tank.

These lights will turn off after a few seconds to save energy, but the fountain will continue to operate according to your settings.

5. Maintenance and Care

Regular cleaning is essential to ensure your pet always has access to fresh water and to prolong the life of the fountain.

5.1 Disassembly for Cleaning

All units of the Petgravity water fountain are detachable for easy cleaning.

  1. Power off the device and disconnect the charging cable.
  2. Unlock the water bowl and remove it.
  3. Remove the Clean Water Tank Lid and empty any remaining water.
  4. Remove the Clean Water Tank from the Main Unit.
  5. Remove the Waste Water Tank Lid and carefully empty the wastewater.
  6. Remove the Waste Water Tank from the base.
Comparison of self-refill fresh water system versus normal products with recycled slime water.
Figure 4: The self-refill system ensures no recycling of dirty water.

5.2 Cleaning Instructions

  • Wash the Water Bowl, Clean Water Tank, Clean Water Tank Lid, Waste Water Tank, and Waste Water Tank Lid with mild soap and water. Rinse thoroughly to remove all soap residue.
  • Do NOT wash the Main Unit with water. Wipe it clean with a damp cloth.
  • Ensure all parts are completely dry before reassembling.

Note: No filters are required for this fountain, eliminating the need for filter replacement.

5.3 Reassembly

Reassemble the fountain by following the assembly steps in reverse order.

6. Troubleshooting

If you encounter any issues with your Petgravity water fountain, please refer to the following table:

Problem Possible Cause Solution
Indicator lights blinking Float valve not properly seated or tank lid not tightly closed. Ensure the float valve on the bottom of the waste water tank is correctly positioned. Make sure the waste water tank lid is securely closed.
No water dispensed / Water flow is weak Clean water tank empty, waste water tank full, or low battery. Refill the clean water tank. Empty the waste water tank. Charge the device.
Device not turning on Low battery or power switch is off. Charge the device. Ensure the power switch is in the ON position.
Unusual noise during operation Normal during water change cycle (40-50dB for a few seconds). If continuous, check for obstructions. A slight noise during water change is normal. If persistent or loud, disassemble and check for foreign objects in the pump area.
Touchscreen unresponsive Screen is locked. Long press the "Unlock" button to unlock the screen.

7. Specifications

Feature Specification
Brand Name Petgravity (also listed as jianyana)
Type Cats (suitable for small pets)
Material Plastic (Food-grade PC), Stainless Steel (bowl)
Volume 3L
Power Source Charge (Rechargeable Battery)
Battery Capacity 2000mAh (up to 180 days operation)
Max Output 120g
Min Output 100g
With Water Dispenser Yes
Time Setting Yes (3H, 4H, 6H intervals)
LCD Display Yes (Touchscreen interface)
Is Smart Device No (refers to smart home integration, not smart features)
Battery Included No (refers to external batteries, internal rechargeable battery is included)
High-concerned chemical None
Dimensions (L x W x H) 330mm x 235mm x 250mm (approx. 12.99 x 9.25 x 9.84 inches)
Noise Level 0dB during standby, 40-50dB during water change (few seconds)
Dimensions of the Petgravity water fountain: 330mm length, 235mm width, 250mm height.
Figure 5: Product Dimensions.
Diagram showing quiet operation of the smart self-refill pet water fountain at 0dB compared to recycled slime water at 45-55dB.
Figure 6: Quiet Operation details.

8. User Tips

  • Energy Saving: The indicator lights on the touchscreen are designed to turn off after a few seconds to conserve battery life. This is normal operation and does not indicate a malfunction.
  • Regular Waste Water Emptying: Depending on your settings and pet's usage, remember to empty the waste water basin every other day to maintain hygiene. The detachable design makes this easy.
  • Charging: The water fountain can only be charged when it is turned on. Ensure the power switch is in the ON position when connecting the Type-C charging cable.
  • Pet Adaptation: Some pets may take a day or two to get used to the new fountain. Ensure they have access to another water source during this transition if needed.
  • Placement Flexibility: Thanks to its wireless design and long battery life, feel free to place the fountain in any room, including the living room, bedroom, or balcony, without being restricted by power outlets.

9. Warranty and Support

9.1 Non-Warranty Policy

Please refer to the official product documentation for detailed warranty information. Generally, the warranty may not cover damages caused by:

  • Improper use or maintenance.
  • Unauthorized repairs or modifications.
  • Accidental damage or misuse.
  • Normal wear and tear.

Keep your purchase receipt as proof of purchase for any warranty claims.

9.2 Additional Resources

For a more detailed guide and visual instructions, you can refer to the official user manual PDF: View User Manual (PDF).

For further assistance or inquiries, please contact the seller or manufacturer's customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.