1. Introduction
The SUGON 3010PM is a high-performance regulated DC power supply designed for precision applications in laboratories, electronics repair, and phone maintenance workshops. It offers stable and reliable power output with advanced features such as real-time load power display, high-low voltage conversion, multiple USB outputs, and comprehensive protection mechanisms. This manual provides essential information for the safe and efficient operation of your SUGON 3010PM power supply.

2. Safety Information
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the power supply to a grounded outlet.
- Do not operate the device in wet or damp conditions.
- Ensure proper ventilation to prevent overheating.
- Do not open the casing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Avoid short-circuiting the output terminals.
- Use appropriate voltage and current settings for the device being powered.
- Keep out of reach of children.
3. Product Overview and Features
The SUGON 3010PM is a versatile DC power supply with a robust design and intelligent features:
- Real-time Load Power Display: Monitor the working status and load of the power supply at a glance.
- High-Low Voltage Conversion: Unique 8.4V/30V limited conversion, with 8.4V suitable for laptop maintenance.
- Multiple USB Outputs: Equipped with 6 sets of intelligent USB adjustable output interfaces and 2 sets of fixed 5V/2A current outputs, optimizing charging efficiency and convenience.
- Output Switch Function: Easily enable or disable the main output.
- Memory Buttons: Four memory buttons allow for quick recall (1-second press) and storage (3-second press) of voltage, current, and overcurrent protection settings (continuous or single-time).
- Stable Output: Provides stable and reliable voltage and current output without peak fluctuations, operating in constant current (CC) and constant voltage (CV) modes.
- Toroidal Transformer: Features a ring transformer for stable operation at high temperatures, ensuring long service life.
- Comprehensive Protection: Includes overvoltage, overcurrent (continuous and single-time), and short-circuit protection.


4. Setup
- Unpacking: Carefully remove the power supply and all accessories from the packaging. Verify that all components are present.
- Placement: Place the power supply on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for airflow.
- Power Connection: Connect the provided power cable to the AC input socket on the rear panel of the power supply and then to a grounded electrical outlet.
- Output Connections: Connect your load device to the red (positive) and black (negative) output terminals on the front panel using appropriate test leads.
- USB Connections: For charging or powering USB devices, use the adjustable USB output ports (1-6) or the fixed 5V/2A USB output ports (A, B).

5. Operating Instructions
5.1 Basic Operation
- Power On: Press the POWER switch on the front panel to turn on the device. The digital displays will illuminate.
- Voltage Adjustment: Use the 'Voltage Shift Adjustment' knob to set the desired output voltage (DC 0-30V). The display shows the current voltage setting.
- Current Adjustment: Use the 'Current Shift Regulation' knob to set the desired output current limit (DC 0-10A). The display shows the current limit setting.
- Output Power Display: The 'W' display shows the real-time output power.
- Output ON/OFF: Press the 'Output Switch Button' to enable or disable the main DC output. The output indicator light will show the status.
5.2 High-Low Voltage Conversion
The power supply features an 8.4V-30V limited voltage conversion switch. Toggle this switch to select between the full 0-30V range or a limited 0-8.4V range, which is particularly useful for sensitive applications like laptop maintenance.
5.3 Memory Channels (M1-M4)
The device has 4 sets of working storage channels (M1, M2, M3, M4) to store different voltage and current settings, along with continuous or single-time overcurrent protection settings.
- To Read: Press a memory button (M1-M4) for 1 second to recall the stored settings.
- To Save: Set the desired voltage, current, and protection mode. Then, press and hold the desired memory button (M1-M4) for 3 seconds until a confirmation beep or indicator light confirms saving.
5.4 Lock/Unlock Function
To prevent accidental changes to voltage and current settings:
- Lock: Long press the voltage knob. The 'LOCK' indicator light will turn on.
- Unlock: Long press the voltage knob again. The 'LOCK' indicator light will turn off.

5.5 USB Outputs
The SUGON 3010PM offers versatile USB charging capabilities:
- Adjustable USB Outputs (1-6): These 6 ports provide adjustable USB output (0V-30V) synchronized with the main DC output. They can be used for charging, powering on, testing, and maintenance of various devices.
- Fixed 5V/2A USB Outputs (A, B): Two dedicated ports provide a stable 5V/2A output for charging mobile phones and other 5V devices.

5.6 Overcurrent Protection (OCP)
The device supports two types of overcurrent protection:
- Continuous Overcurrent Protection (CONT.OCP): Maintains the set current limit continuously.
- Single-time Overcurrent Protection (ONCE.OCP): Triggers protection once the current limit is exceeded, requiring manual reset.
Select the desired OCP mode using the corresponding buttons on the front panel.
5.7 Product Demonstration Video
6. Maintenance
- Cleaning: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
- Ventilation: Regularly check that the ventilation openings are clear of dust and debris to ensure proper cooling.
- Storage: Store the power supply in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Inspection: Periodically inspect the power cord and test leads for any signs of damage. Replace damaged cables immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/display off | Power cable disconnected; Power switch off; Blown fuse | Check power cable connection; Turn on power switch; Replace fuse (if applicable, by qualified personnel) |
| No output voltage/current | Output switch off; Overcurrent protection triggered; Short circuit in load | Press output switch button; Reset OCP (if triggered); Check load for short circuits |
| Unstable output | Loose connections; Faulty test leads; Overloaded circuit | Check all connections; Replace test leads; Reduce load or check for short circuits |
| Overheating | Blocked ventilation; Prolonged high load operation | Clear ventilation openings; Reduce load or allow cooling time |
| Knobs not responding | Lock function engaged | Long press the voltage knob to unlock (refer to section 5.4) |
8. Specifications
| Parameter | Value |
|---|---|
| Model Number | SUGON 3010PM |
| Product Name | Regulated DC Power Supply |
| Material | Metal |
| Type | Combination |
| Application | Phone Repairing Tool Set |
| DIY Supplies | Phone Repair |
| Origin | Mainland China |
| Power | 310W (MAX) |
| Output Voltage Range | DC 0-30V |
| Maximum Adjustable Current | DC 10A |
| Input Voltage (GB/EU) | AC 220V, 50Hz/60Hz |
| Input Voltage (US) | AC 110V, 50Hz/60Hz |
| Dimensions (L x W x H) | 228mm x 144mm x 173mm |
| Net Weight | 6.9 kg |
| Gross Weight | 7.7 kg |
| Package Type | Case |

9. User Tips
- For precise voltage calibration, gently rotate the 'A' knob after removing it with a small screwdriver.
- Utilize the memory channels (M1-M4) to quickly switch between frequently used voltage and current settings for different repair tasks.
- When working with sensitive electronics, always start with a lower voltage and gradually increase it to the required level.
- The 8.4V limited voltage conversion is ideal for testing and powering laptop components without risking overvoltage.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.