BEBONCOOL JC200 Hall Effect All-in-one Joycon Controller User Manual

1. Introduction

Thank you for choosing the BEBONCOOL JC200 Hall Effect All-in-one Joycon Controller. This controller is designed to enhance your gaming experience on Nintendo Switch and Switch OLED consoles, offering advanced features such as Hall Effect joysticks, RGB lighting, 6-axis gyro, dual motor vibration, and programmable buttons. Please read this manual carefully to ensure proper usage and to get the most out of your new controller.

Figure 1: BEBONCOOL JC200 Controller Overview

2. Specifications

3. Setup

3.1 Attaching the Controller to Your Console

1. Align the BEBONCOOL JC200 controller with the side rails of your Nintendo Switch or Switch OLED console.
2. Slide the console firmly into the controller until it clicks securely into place. The back slide lock will help ensure a stable connection.

Figure 2: Controller attached to console, showing features

3.2 Initial Wireless Connection

The controller connects wirelessly via Bluetooth. Follow these steps for the initial connection:

1. On your Nintendo Switch/OLED console, navigate to the HOME Menu.
2. Select "Controllers" > "Change Grip/Order".
3. On the BEBONCOOL JC200 controller, press and hold the "HOME" button for approximately 3 seconds. The indicator lights on the controller will begin to flash.
4. Once the console detects the controller, release the "HOME" button. The controller will automatically pair.

Figure 3: Wireless Connection Steps

After the first successful connection, you can simply press the "HOME" button on the controller to wake up the console and automatically reconnect.

Note: If the console is in 'sleep mode', you may need to use the console's power button to wake it up first before pressing the controller's HOME button for reconnection.

3.3 Charging the Controller

The controller features a powerful 1000mAh built-in battery. Use the included 1.5-meter USB to Type-C 2-in-1 cable for charging.

1. Connect one Type-C end of the cable to the charging port on the controller.
2. Connect the other Type-C end to your Nintendo Switch console's charging port.
3. Connect the USB-A end to a suitable power source (e.g., a USB wall adapter, console dock, or computer USB port).

This setup allows for simultaneous charging of both the controller and the Switch console. A full charge takes approximately 3 hours and provides up to 10 hours of gameplay.

Figure 4: Charging Ports and Game Card Slots

4. Operating Instructions

4.1 RGB Lighting Modes

The controller features 17 different colors of RGB lighting with adjustable intensities. You can switch between various lighting modes:

• Fixed Mode: A static color display.
• Breathing Mode: Colors fade in and out.
• Blinking Mode: Colors flash on and off.
• RGB Colorful Mode: Cycles through a spectrum of colors.

Refer to the controller's specific buttons (usually a dedicated light button or a combination with a function button) to cycle through these modes and adjust intensity.

Figure 5: Adjustable Light Modes

4.2 Turbo Function

The Turbo function allows for rapid, repeated button presses, giving you an advantage in fast-paced games. The controller offers 3 selectable speeds:

• 5 shots/second
• 12 shots/second
• 20 shots/second

To activate and adjust the Turbo function, consult the controller's specific button combinations (often involving a 'T' button and an action button).

Figure 6: Auto & Manual Turbo Speeds

4.3 Vibration Adjustment

The dual vibration motors provide haptic feedback with 3 adjustable levels of intensity:

• 0% (Off)
• 60% (Medium)
• 100% (Strong)

Adjust the vibration intensity to your preference for an immersive gaming experience.

4.4 6-Axis Gyro Sensor

The built-in 6-axis gyroscope detects tilt and motion, enabling precise aiming and movement in games that support motion controls. This allows for intuitive control by simply moving the controller.

Figure 7: Vibration and Gyro Sensor Functions

4.5 Programming Functions

The controller features programmable buttons, allowing you to customize controls and create complex command sequences. You can map single or multiple buttons, including A, B, Y, L, ZL, R, ZR, and D-pad directions. The loop programming buttons enable endless cycling of your personalized combination skills, minimizing button abuse and extending the controller's lifespan.

4.6 Game Card Slots

The controller includes four convenient game card storage slots, allowing you to carry and easily switch between your favorite games on the go.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Protection: The controller features a soft sponge layer on the inside to prevent scratches on your Switch console. The back slide lock ensures the console stays securely in place.

6. Troubleshooting

6.1 Connection Issues

• Controller not connecting: Ensure the console is awake (press its power button if in sleep mode) before attempting to reconnect the controller by pressing its HOME button.
• Intermittent connection: Ensure there are no obstructions between the controller and the console. Try moving closer to the console.

6.2 Joystick Drift/Dead Zones

The BEBONCOOL JC200 features upgraded Hall Effect joysticks, which utilize magnetic induction to prevent drift and dead zones, effectively prolonging the life of the joystick and ensuring precise control.

Figure 8: Hall Effect Joystick Technology

6.3 Battery and Charging

• Controller not charging: Ensure the USB to Type-C cable is securely connected to both the controller, console, and power source. Verify the power source is active.
• Short battery life: Ensure the controller is fully charged (approx. 3 hours). High vibration settings and continuous RGB lighting may consume more power.

7. User Tips

• Protecting Your Console: The controller's internal soft sponge layer is designed to protect your Switch from scratches. Always ensure the console is properly seated and the back slide lock is engaged for maximum security.
• Customization: For advanced customization of handle buttons, joystick dead zones, and vibration settings, connect your controller via Bluetooth to the Keylinker APP.
• Quick Reconnection: After the initial pairing, a quick press of the "HOME" button will wake up your console and automatically reconnect the controller, streamlining your gaming startup.
• Ergonomic Comfort: Take advantage of the ergonomic full-size grip for extended gaming sessions without hand fatigue.

8. Warranty and Support

The BEBONCOOL JC200 controller comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact BEBONCOOL customer service through the retailer where you purchased the product or visit the official BEBONCOOL website for support resources.