1. Product Overview
The OLAX D8pro Mini UPS is a portable, uninterruptible power supply designed to provide backup power for various networking devices such as Wi-Fi routers, modems, cameras, and other low-power electronics. With a high-capacity battery, it ensures your essential devices remain operational during power outages.
2. Package Contents
Please check the box for the following items:
- OLAX D8pro Smart Mini DC UPS Pro
- DC Cable (Male to Male)
- User Manual (this document)
3. Setup Instructions
Follow these steps to set up your OLAX D8pro Mini UPS:
- Charge the UPS: Connect the provided AC power adapter (not explicitly listed in package contents but implied by AC Input) to the AC Input port (100-240V) on the rear of the UPS. Plug the adapter into a wall outlet. The battery indicator LEDs on the top panel will illuminate to show charging status. Ensure the UPS is fully charged before first use.
- Identify Device Voltage: Determine the voltage and current requirements of the device you wish to power (e.g., router, modem). The OLAX D8pro offers multiple DC output options.
- Connect Your Device:
- For DC-powered devices: Use the included male-to-male DC cable to connect your device to one of the DC output ports (5V, 9V, 12V, 24V POE) on the front panel that matches your device's voltage. Ensure the polarity is correct if your device requires it.
- For USB-powered devices: Connect your device to the USB 5V Output port on the rear panel.
- For POE-compatible devices: Use the POE 24V/0.6A output port.
- Power On: Press the ON/OFF switch located on the rear panel to turn on the UPS. The battery indicator LEDs will show the current charge level.
4. Operating Instructions
The OLAX D8pro Mini UPS operates automatically once connected and powered on.
- Automatic Power Backup: When the main power supply is active, the UPS charges its internal battery and passes power through to your connected devices. In the event of a power failure, the UPS will automatically switch to battery power, providing uninterrupted operation for your devices.
- Battery Level Indicators: The LED indicators on the top panel display the remaining battery charge (25%, 50%, 75%, 100%). Monitor these indicators to understand the available backup time.
- Powering Off: To turn off the UPS, press and hold the ON/OFF switch until the indicators turn off. Disconnect all devices before storing.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the UPS. Do not use liquid cleaners or aerosols.
- Storage: If storing the UPS for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge it every 3-6 months to maintain battery health.
- Temperature: The device is designed with honeycomb ventilation for temperature resistance. Avoid operating or storing in extreme temperatures.
- Ventilation: Ensure the ventilation openings on the device are not blocked to prevent overheating.
6. Troubleshooting
- UPS not turning on: Ensure the UPS is charged. Connect it to an AC power source and allow it to charge for a few hours.
- Connected device not receiving power:
- Verify the UPS is turned on.
- Check that the DC cable is securely connected to both the UPS output port and your device's input port.
- Ensure the selected output voltage on the UPS matches your device's requirement.
- Confirm your device's power consumption does not exceed the UPS's output capacity for that port or the total output.
- Short backup time: The battery may not be fully charged, or the connected devices are drawing more power than anticipated. Reduce the number of connected devices or check their power consumption.
- Overheating: Ensure the UPS is placed in a well-ventilated area and its vents are not obstructed. The device has built-in charge protection and temperature resistance features.
7. Specifications
| Feature | Specification |
|---|---|
| Model No. | D8 PRO |
| Battery Capacity | 20000mAh / 3.7V (74Wh) Li-ion |
| Input | AC 100-240V~50/60Hz |
| Output 1 (POE) | 24V / 0.6A (15W Max) |
| Output 2 (DC) | 12V / 1.5A (18W Max) |
| Output 3 (USB) | 5V / 2A (10W Max) |
| Output 4 (DC) | 9V / 2A (18W Max) |
| Output 5 (DC) | 5V / 2A (10W Max) |
| Total Output | 24W Max |
| DC Interface | DC5.5*2.1mm |
| Protection | Short Circuit, Charge Protection |
| Weight | 0.8 kg |
| Certifications | CE, RoHS, FCC, 3C |
| Application | Networking devices (Routers, Modems, Cameras, etc.) |
8. Warranty and Support
For warranty information, please refer to the terms provided by your retailer or contact the manufacturer directly. The product is generally covered by a standard warranty for electronic devices.
For technical support or inquiries, you may contact the seller via:
- WhatsApp: +8617352882023
- Email: 936442401@qq.com
9. User Tips
- Cable Compatibility: While a male-to-male DC cable is included, ensure it is compatible with your specific device's DC input jack. If not, you may need to acquire an appropriate adapter or cable.
- Voltage Matching: Always double-check the voltage requirements of your device before connecting it to the UPS. Using an incorrect voltage can damage your device.
- Power Multiple Devices: The OLAX D8pro can power multiple devices simultaneously, provided their combined power draw does not exceed the total output capacity of the UPS (24W Max). Distribute devices across different output ports as needed.