Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Infitary 160W LED Car Headlights. Designed for various vehicle models, these high-power LED headlights offer multiple color temperatures (3000K, 4500K, 6500K) and advanced thermal management for enhanced performance and longevity. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Specifications
| Feature | Specification |
|---|---|
| LED Chip | CSP4575 (15 core) |
| Voltage | 12 V (For car Voltage: 12V) |
| Wattage | 160W/Pair |
| Luminous Flux | 40000LM |
| Lifespan | >30000 Hours |
| Waterproof Rating | IP68 |
| Color Temperature | 3000K (Yellow), 4500K (Warm White), 6500K (Cool White) |
| Heat Dissipation | Double copper tube, Aluminum Heatsink, High-speed silent fan (8500 RPM) |
| Application | Car Headlights (Car SUV motorcycles most of vehicles) |
| Canbus | Canbus Ready (Intelligent Decoding) |
| Radio Interference | Anti Radio interference |
| Control | Intelligent Temperature Control |
| Certification | CE |
| Item Type | Other |
| Origin | Mainland China |
| Dimensions (approx.) | 77mm (Height) x 32.5mm (Base Diameter) x 14.5mm (LED Width) |
Note: For truck applications, additional power supply modification may be required.
Package Contents
- 2 x Infitary LED Headlight Bulbs
- 1 x Instruction Manual
Installation Guide
These LED headlights are designed for easy, tool-free, plug-and-play installation, applicable to most vehicle models. Please ensure you select the correct socket type for your vehicle before attempting installation. Refer to the images below for visual guidance.
Socket Type Compatibility
The Infitary LED Headlights are available in various socket types. Please verify your vehicle's required socket type (e.g., H4, H7, H11, 9005, 9006, 9012) before attempting installation.

General Installation Steps (Types H1/H3/H4/H7/H13/9004/9007)
- Open the front cover of the vehicle and prepare to install the LED headlight.
- Locate the original halogen bulb.
- Open the spring clip and remove the original halogen bulb.
- Install the new chuck onto the headlight assembly.
- Press the spring clip to secure it firmly.
- Aim at the chuck slot and insert the LED bulb into the chuck.
- Ensure the chuck slot matches the convex position.
- Rotate slightly to fix the bayonet.
- Connect the power supply and test if it works properly.

General Installation Steps (Types H8/H9/H11/9005/9006/5205/880/881)
- Open the front cover of the vehicle and prepare to install the LED light.
- Locate the original halogen bulb.
- Remove the original car light.
- Place the LED bulb in its original position.
- Twist the LED lights until they fit and are secure.
- Connect the power supply and test if it works properly.

Installation Considerations
- The compact design (32.5mm base diameter) of these headlights makes installation easier compared to bulkier alternatives, reducing the chance of interference with the car light assembly.
- The large slope design ensures the headlight will not jam the installation buckle, facilitating a smooth installation process.


Operating Instructions
Changing Color Temperature
The Infitary LED Headlights offer three color temperatures: 3000K (Yellow), 4500K (Warm White), and 6500K (Cool White). The color can be changed by cycling the light switch.
- Initial Turn On: The lights will illuminate in a random color (3000K, 4500K, or 6500K).
- Cycling Colors: To change the color, turn the lights off and then back on within a 0.3 to 6-second interval. Each cycle will switch to the next color temperature.
- First turn on: 3000K Yellow light (Note: H4 Hi/Lo Beam does not have this color on high beam).
- Second turn on: 4500K Warm White light (Note: H4 Hi/Lo Beam does not have this color).
- Third turn on: 6500K Cool White light.
- H4 (Hi/Lo Beam) Specifics: For H4 bulbs, the high beam will always be 6500K. The low beam will cycle through 3000K, 4500K, and 6500K.
- Other Single Beam Types (H1/H7/H11/9005/9006/9012): Both high and low beams will cycle through all three color temperatures (3000K, 4500K, 6500K).


Maintenance and Care
General Precautions
- Always ensure the vehicle is in park or securely in gear, with the ignition off and keys removed, before performing any maintenance.
- Avoid touching the lamp beads with bare fingers to prevent staining or damage.
- Do not press the fan, as this can cause damage.
- Ensure correct positive and negative connections. Faulty connections can lead to lighting problems.
- When adjusting the bulb, ensure the end of the bulb does not contact the interior light shield of the headlight. The wires of the lights should face downwards.
- It is recommended to install a dust cover to protect the headlights and extend their service life.
Thermal Management System
The Infitary LED Headlights feature a robust cooling system to ensure optimal performance and longevity:
- Aviation Aluminum Body: Provides a durable and heat-conductive structure.
- Double Copper Tube & Copper Substrate: Efficiently transfers heat away from the LED chips.
- Heat Dissipation Fins: Increases surface area for cooling.
- High-Speed Silent Fan (8500 RPM): Actively dissipates heat, ensuring stable operation.



Troubleshooting
Common Issues and Solutions
- Light Not Working After Installation:
If the light does not work after installation, try reversing the plug 180° and reconnecting it. LED bulbs are polarity sensitive.
- Flickering or Error Messages (CANBUS Issues):
These LED headlights are "Canbus Ready" and feature intelligent decoding. However, some vehicles, especially newer models or those with sensitive CANBUS systems, may still experience flickering or error messages due to the lower power consumption of LED bulbs compared to halogen. In such cases, installing an additional pair of CANBUS decoders (not included) may be necessary to resolve the issue.
- Colors Appear Out of Sync:
If the two headlights display different colors, you can reset the synchronization. Turn the power supply on and off continuously and quickly for more than 6 times, with each switch action taking less than 1 second. This process will reset both lights to a synchronized state.

User Tips
- Verify Socket Type: Always double-check your car's headlight socket type before purchasing to ensure compatibility.
- Brightness Comparison: These LED headlights offer significantly higher brightness and concentration compared to first and second-generation LED beads and traditional halogen lamps, improving visibility in various conditions.
- All-Weather Performance: The IP68 waterproof rating ensures good performance in diverse weather conditions, including haze, sandstorms, rain, and snow.


Safety Information
- Always exercise caution to avoid burns, especially when the vehicle's lighting has been recently turned on or off.
- Ensure the vehicle is stable and powered off before beginning any installation or maintenance.
- If you are unsure about any installation steps, it is recommended to seek professional assistance.
Warranty and Support
For warranty information, technical support, or further assistance, please contact Infitary customer service through your purchase platform. Keep your purchase receipt as proof of purchase.