RMshebei RMDZW-3PNB 100A

Contents

RMshebei WiFi Enabled Smart Circuit Breaker User Manual

Model: RMDZW-3PNB 100A

Introduction

The RMshebei RMDZW-3PNB 100A is a WiFi-enabled smart circuit breaker designed for both home and industrial applications. It offers comprehensive protection features, electricity metering, and remote control capabilities through a mobile application, supporting smart home integration with platforms like Tuya Smart, Smart Life, Google Assistant, and Amazon Alexa.

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your smart circuit breaker.

RMshebei WiFi Smart Circuit Breaker with features listed
Overview of the RMshebei WiFi Smart Circuit Breaker and its main features.

Main Functions

The RMshebei Smart Circuit Breaker integrates multiple functionalities into a single device:

  • Over/Under Voltage Protection: Safeguards against voltage fluctuations.
  • Over/Under Current Protection: Prevents damage from excessive or insufficient current.
  • Residual Current (Leakage) Protection: Detects and protects against electrical leakage.
  • High Temperature Protection: Automatically shuts down if the device temperature is too high.
  • Delay Protection: Configurable delays for various protection actions.
  • Timer Switch: Schedule on/off times for connected circuits.
  • Bidirectional Energy Monitor: Tracks electricity consumption and generation (e.g., for photovoltaic systems).
  • Voltage/Current Imbalance Protection: Protects against imbalances in three-phase systems (App configurable).
  • Phase Shortage/Sequence Protection: Ensures correct phase operation (App configurable).
  • Electricity Metering: Monitors power usage in kWh.
  • Remote Control: Manage the circuit breaker via the Tuya Smart / Smart Life app.
  • Voice Control: Compatible with Amazon Alexa and Google Assistant.
  • Device Sharing: Share control with other users.
Functional features of the smart circuit breaker
Visual representation of the smart circuit breaker's functional features.

Specifications

ParameterValue
Model NumberRMDZW-3PNB 100A
Brand NameRMshebei
Rated Supply VoltageAC380V
Operation Voltage RangeAC80V-400V (Single Phase)
Rated Current1-100A
Rated Frequency50/60Hz
Power Display Range0-99999.9 kWh
Over Voltage Protection (U>)120-300V (Adjustable)
Under Voltage Protection (U<)80-210V (Adjustable)
Over Current Protection1-100A (Adjustable)
Current Leakage Protection10-99mA/OFF (Adjustable)
Protection Trip Action Time<0.5s
Reset/Start Delay0-9999s (Adjustable)
Working Temperature-30°C to 70°C
Working Humidity≤85%
Working AltitudeNot Exceeding 2000m
Pollution LevelLevel 3
Wiring CapacityInsulated copper wire under 35mm²
CertificationsCE, RoHS, FCC
Dimensions of the RMshebei Smart Circuit Breaker
Dimensions of the RMDZW-3PNB 100A Smart Circuit Breaker.

Setup and Installation

Safety Precautions

  • This product has no isolation function. Always turn off the main power supply before any installation, maintenance, or repair work.
  • The neutral (N) line of this product is directly connected and has no disconnection function.
  • The device must be wired according to the markings on the device and installed correctly.
  • Although this device has protection functions, it cannot replace a normal circuit breaker. Always install a standard circuit breaker (e.g., DZ47, C65) upstream of this device for short-circuit protection.
  • Tighten the clamp screws firmly to prevent poor contact, which could damage the device.

Physical Installation

The RMshebei Smart Circuit Breaker features a modular design for convenient DIN-Rail mounting. Ensure adequate space for wiring and ventilation.

DIN-Rail mounting and wiring diagram for the smart circuit breaker
DIN-Rail mounting and basic wiring connections (L1, L2, L3, N).

Wiring Instructions

Connect the input and output wires according to the labels on the device. For a three-phase system, connect L1, L2, L3, and N (Neutral) lines as indicated. Ensure all connections are secure and properly insulated.

App Installation and WiFi Connection

  1. Download the App: Use your smartphone to scan the QR code provided in the manual or search for "Smart Life" or "Tuya Smart" in Google Play Store or Apple App Store. Download and install the application.
  2. Create an Account: Register for an account using your mobile number.
  3. Prepare for Pairing: Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network.
  4. Enter Pairing Mode: Press and hold the third button on the circuit breaker for 3 seconds. Release the button to display the device. The Wi-Fi indicator light will start fast flashing, indicating it's searching for a Wi-Fi signal.
  5. Add Device in App: Open the app, click the "+" button in the upper right corner of the homepage, or click "Add Device". Select "Breaker" under the "Electrical" category or "Switch module (Wi-Fi)" from "Energy".
  6. Connect to Wi-Fi: Tap the device found in the app and enter your Wi-Fi password to connect. The Wi-Fi indicator will change from flashing to a steady light once connected.
Video demonstrating the app pairing process, remote control, energy monitoring, and settings configuration.

Operation

Remote Control via App

Once connected to the app, you can remotely control the circuit breaker from anywhere with an internet connection. The app allows you to:

  • Turn the circuit breaker ON or OFF.
  • View real-time current, power, and voltage.
  • Monitor electricity consumption per hour, day, month, and year.
  • View forward and reverse currents (power consumption from grid vs. power input from solar panel to grid).
Remote control interface on a mobile phone showing energy data
Mobile app interface for remote control and energy monitoring.

Voice Control

The device supports voice control through Amazon Alexa and Google Assistant. Link your Tuya Smart or Smart Life account to your smart assistant to control the circuit breaker with voice commands.

Voice control setup with Amazon Alexa and Google Assistant
Example of voice control integration with smart home assistants.

Timing Schedule

Utilize the timing module in the app to set countdowns, timers, and cycle times for automatic circuit breaker switching. This feature helps in making your life orderly, eco-friendly, and saving electricity.

Timing schedule feature in the app with examples of lights turning on
Example of setting a timing schedule for lights using the app.

Display Modes

The device features a clear display with two modes to show various parameters:

  • Mode 1: Displays Voltage, Total Electricity Consumption, Power Factor, Current, Forward Electricity Consumption, Frequency.
  • Mode 2: Displays A-Phase Power Parameters, B-Phase Power Parameters, C-Phase Power Parameters, A-Phase Parameters & Temperature, B-Phase Parameters & Temperature, C-Phase Parameters & Temperature.
Front view of the smart meter showing display and features
Front display of the smart meter showing various electrical parameters.

Prepaid Recharge Management

The app allows for prepaid recharge management. You can enable or disable prepaid mode, top up power, and the device will automatically switch off when the power runs out. You can also clear the power level with a single click. Access this feature by entering the default password (0000) in the settings module, which can be changed.

Troubleshooting and Alarm Settings

Fault Records

The Tuya app records all fault events, including over/under voltage, over/under current, current leakage, voltage imbalance, current imbalance, and phase sequence protection events.

WiFi Indicator Light Status

  • Fast flashing: Indicates the device is searching for a Wi-Fi signal.
  • Slow flashing: Indicates Wi-Fi is offline.
  • Long light: Indicates Wi-Fi is connected.

Alarm Settings

You can configure various protection thresholds and enable/disable protection functions within the app's alarm settings. To access these settings, long-press the key on the device or navigate through the app's settings module.

  • High Temperature Alarm: Set a threshold (e.g., 10-85°C). If the temperature exceeds this, the circuit breaker automatically shuts down to prevent fire.
  • Leakage Current Alarm: Set a threshold (e.g., 10-99mA). If leakage current exceeds this, the circuit automatically shuts down.
  • Over Current Alarm: Set an overload current threshold (e.g., 1-100A). You can also set a delay time for overcurrent protection and recovery.
  • Overvoltage Alarm: Set an overvoltage threshold (e.g., 120-300V).
  • Undervoltage Alarm: Set an undervoltage threshold (e.g., 80-210V).
  • Three-phase Current Unbalance Alarm: Set a percentage threshold (e.g., 10-100%).
  • Three-phase Lack of Phase Alarm: Detects and protects against phase loss.
  • Reverse Phase Sequence Alarm: Detects and protects against incorrect phase sequence.
  • Voltage Three-phase Imbalance Alarm: Set a percentage threshold (e.g., 10-100%).
  • Lost Flow Alarm: Set a threshold (e.g., 10A) for current loss.
Adjustable protection settings in the mobile app
Screenshot of the mobile app showing adjustable protection settings for leakage, temperature, overcurrent, overvoltage, and undervoltage.

Maintenance

To ensure the longevity and optimal performance of your RMshebei Smart Circuit Breaker, follow these maintenance guidelines:

  • Regular Inspection: Periodically check the device for any visible damage, loose connections, or signs of overheating.
  • Cleanliness: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Firmware Updates: Ensure your device firmware and mobile app are updated to the latest versions to benefit from new features and security enhancements.
  • Environmental Conditions: Operate the device within the specified working temperature and humidity ranges to prevent malfunction.
  • Power Off Before Servicing: Always turn off the main power supply before performing any physical inspection or maintenance on the circuit breaker.

User Tips

  • App Control: The device is indeed three-phase and can handle up to 100A, with full remote control and monitoring capabilities via the app.
  • Customizable Protections: Take advantage of the adjustable protection settings in the app to tailor the device's safety features to your specific electrical system and load requirements.
  • Energy Monitoring: Regularly check the energy statistics in the app to understand your power consumption patterns and identify potential areas for energy saving.
  • Timing Features: Use the timing and scheduling functions to automate the switching of appliances or lighting, enhancing convenience and energy efficiency.
  • Password Protection: For prepaid mode, remember to change the default password (0000) to a secure one to prevent unauthorized access.

Warranty and Support

For detailed warranty information and technical support, please refer to the official documentation or contact the manufacturer directly.

Manufacturer Contact Information:

  • Company: Yueqing Wentong Electronic Technology Co., Ltd.
  • Address: No. 3 Barte Road, Xiangyang Industrial Zone, Leqing City, Wenzhou City, Zhejiang Province, China
  • Phone: 086 13887787770
  • Email: wtdzcn@163.com
  • Website: www.rmshebei.com

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.