1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of your ANDELI replacement protective lenses for welding helmets. These lenses are designed to protect the main auto-darkening filter and provide a clear view during welding operations. Please read this manual carefully before use to ensure safety and optimal performance.
For any further questions, please consult our customer service.
2. Product Overview
The ANDELI protective lenses are high-quality replacement parts for various welding helmet models. They come in two main types: internal and external protective films, each serving a specific role in safeguarding your welding helmet's main lens from scratches, spatter, and other damage.
2.1 Internal Protective Films
These films are placed inside the welding helmet, protecting the inner surface of the auto-darkening filter from dust, sweat, and minor impacts.


2.2 External Protective Films
These films are mounted on the exterior of the welding helmet, acting as the primary barrier against welding spatter, sparks, and heavy impacts, which can severely damage the main auto-darkening lens.


3. Specifications
The protective lenses are manufactured from high-quality PC material, offering good softness and toughness for durability and impact resistance.
| Attribute | Value |
|---|---|
| Type | Internal Protective Film |
| Length | 107 mm |
| Width | 99 mm |
| Material | High-Quality PC (Polycarbonate) |
| Features | High-Definition, Transparent, Good Softness and Toughness |
Note: External protective film dimensions may vary slightly depending on the specific helmet model.
4. Installation
Installing the replacement protective lenses is a straightforward process. Always ensure your welding helmet is clean and free from debris before installation.
- Remove Old Lens: Carefully open the lens retention frame on your welding helmet and remove the old, damaged, or worn-out protective lens.
- Clean Helmet: Wipe down the inside and outside of the helmet's lens area to remove any dust or residue.
- Prepare New Lens: The new protective lenses come with a double-sided protective film.
- Insert New Lens: Place the new protective lens into the designated slot in your welding helmet. Ensure it sits flush and securely.
- Secure Lens: Close and secure the lens retention frame according to your helmet's design. Ensure the lens is firmly held in place and does not wobble.

It is crucial to remove the protective film from both sides of the new lens to ensure high clarity vision during welding.

5. Usage
These protective lenses are designed to enhance your welding experience by providing clear vision and robust protection.
- High Clarity Vision: The lenses offer a clearer, brighter view, providing better color and contrast for improved visibility of the weld puddle and surrounding area.
- Anti-Welding Spatter Splash: The external lenses are particularly effective at preventing welding spatter from adhering to and damaging the main auto-darkening filter.


6. Maintenance
Regular maintenance of your protective lenses will extend their lifespan and ensure consistent performance.
- Cleaning: Use a soft, clean cloth and a mild lens cleaning solution to gently wipe the lenses. Avoid abrasive materials or harsh chemicals that could scratch or damage the lens surface.
- Inspection: Before each use, inspect both the internal and external protective lenses for any signs of damage, such as scratches, cracks, or excessive spatter buildup.
- Replacement: Replace lenses immediately if they are scratched, cracked, or if visibility is impaired. Even minor damage can compromise protection and clarity.
7. Troubleshooting
The primary issues related to protective lenses stem from their absence or damage. Using damaged or no protective lenses can lead to significant problems:

- Blurred Vision / Reduced Clarity:
- Cause: Scratches on the lens, welding spatter buildup, or failure to remove the double-sided protective film.
- Solution: Ensure the protective film is removed from new lenses. Clean the lens thoroughly. If scratches or spatter cannot be removed, replace the lens.
- Damage to Main Auto-Darkening Lens:
- Cause: Not using an external protective lens, or using a damaged one, exposes the main auto-darkening filter to direct spatter and impacts.
- Solution: Always use an external protective lens. Replace it promptly if it shows signs of heavy wear or damage to prevent costly damage to the main filter.
8. User Tips
- Always keep spare protective lenses on hand, especially external ones, as they are consumables that will need frequent replacement depending on welding intensity.
- For optimal clarity, ensure both sides of the protective film are peeled off completely before installing a new lens.
- Store unused lenses in a clean, dry place to prevent dust and scratches.
9. Support
For detailed product information, additional guides, or to contact customer service, please refer to the official product page or the user manual PDF available:
If you have any questions or require assistance, please do not hesitate to contact ANDELI customer support.