CENTURY AOKE AK-RK0E+027AB

Contents

DC12V 24V 48V 433MHz RF Wireless Remote Control Switch User Manual

Model: AK-RK0E+027AB

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your DC12V 24V 48V 433MHz RF Wireless Remote Control Switch. This intelligent microprocessor-controlled device is designed for a wide range of applications, including garage door control, lighting systems, remote control curtains, access control systems, and various motor control applications. Its compact design, ease of installation, and reliable performance make it an ideal solution for enhancing convenience and control in your home or business.

Overview of the wireless remote control switch kit, including the receiver and multiple remote controls.
Overview of the wireless remote control switch kit, including the receiver and multiple remote controls.

2. Safety Precautions

  • Always disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure all wiring is performed by a qualified professional and complies with local electrical codes.
  • Do not expose the device to moisture, extreme temperatures, or corrosive environments.
  • Verify the correct voltage and current ratings before connecting the device to any load.
  • Keep remote controls out of reach of children.

3. Package Contents

Your package should contain the following items:

  • 1 x AK-RK02E 2-Channel RF Wireless Receiver Module
  • 1 or more x 2-Button RF Remote Control Transmitters (quantity depends on your purchase)

Please inspect all components for any damage. If anything is missing or damaged, contact your vendor immediately.

4. Specifications

General

  • Brand Name: CENTURY AOKE
  • Model Number: AK-RK0E+027AB
  • Wireless Communication: RF (Radio Frequency)
  • Frequency: 433 MHz
  • Channel: 2
  • Use: Universal, Lighting, Electric Door, Automated Curtains, Switch
  • Origin: Mainland China
  • Certification: CE, FCC

Receiver (Model: AK-RK02E)

  • Working Voltage: DC12-48V
  • Quiescent Current: Less than 6mA
  • Working Temperature: -40°C to +80°C
  • Receiver Sensitivity: -105dBm
  • Working Frequency: 433MHz
  • Output Voltage: DC and Switch Signal (optional)
  • Max Load Current: Less than 10A
  • Dimensions: 8.5 cm x 5.7 cm x 2.6 cm
Dimensions of the receiver module (8.5cm x 5.7cm x 2.6cm).
Dimensions of the receiver module (8.5cm x 5.7cm x 2.6cm).
Internal view of the receiver circuit board with relays.
Internal view of the receiver circuit board with relays.

Transmitter (Remote Control)

  • Buttons: 2 Buttons (A and B)
  • Operating Frequency: 433MHz
  • Remote Distance: Up to 50 meters / 164 feet (in open space)
  • Operating Current: 13 mAh
  • Encode: Fixed code / EV1527 code
  • Dimensions: 5.7 cm x 3.2 cm x 1.1 cm
Close-up of the 2-button remote control.
Close-up of the 2-button remote control.

5. Installation

Before installation, ensure the power supply is disconnected. The receiver module supports both DC and AC switch signal outputs. Choose the appropriate wiring diagram based on your application.

5.1 DC 12-48V Output Wiring Diagram

Wiring diagram for DC 12-48V output applications.
Wiring diagram for DC 12-48V output applications. Connect the DC power supply to V+ and V- terminals. The output load (e.g., lights) connects to NO1/C1 and NO2/C2.

5.2 AC 110V/220V Output Switch Signal Wiring Diagram

Wiring diagram for AC 110V/220V output switch signal applications.
Wiring diagram for AC 110V/220V output switch signal applications. Note the separate power input for the receiver (DC12-48V) and the AC load connections.

5.3 DC 12-48V Motor Wiring Diagram

Wiring diagram for DC 12-48V motor control.
Wiring diagram for DC 12-48V motor control. This setup allows for directional control of a DC motor.

Important: Ensure the receiver is powered by DC12-48V. The output terminals (NO1, C1, NC1, NO2, C2, NC2) are for connecting your load, which can be DC or AC depending on the application and wiring configuration.

6. Operation

The remote control switch offers three main working modes: Momentary, Latched, and Toggle. These modes are configured using the 'Model' button on the receiver board.

6.1 Working Modes

Diagram illustrating Momentary, Toggle, and Latched working modes.
Diagram illustrating Momentary, Toggle, and Latched working modes.
  • Momentary Mode: Press the 'Model' button 1 time.
    - Operation: Press and hold a remote button (e.g., A) to turn the relay ON. Release the button to turn the relay OFF.
  • Latched Mode: Press the 'Model' button 2 times.
    - Operation: Press one remote button (e.g., A) to turn the relay ON. Press another remote button (e.g., B) to turn the relay OFF.
  • Toggle Mode: Press the 'Model' button 3 times.
    - Operation: Press a remote button (e.g., A) to turn the relay ON. Press the same button again to turn the relay OFF.
  • Delay 5 Seconds Mode: Press the 'Model' button 4 times.
    - Operation: Press remote control A button, the relay A actuates and keeps working for 5 seconds, then turns off automatically. The same applies to relay B.

6.2 Learning and Clearing Method

To pair a remote control with the receiver or to clear existing pairings, follow these steps:

Video demonstrating the learning and clearing code procedures for the remote control and receiver.

Learning (Pairing) a Remote:

  1. For Button A (Channel 1): Press the 'Learning' button on the receiver board once. The LED indicator will flash. Then, press button 'A' on your remote control. The LED indicator will flash 3 times and turn off, indicating successful pairing for button A.
  2. For Button B (Channel 2): Press the 'Learning' button on the receiver board twice. The LED indicator will flash. Then, press button 'B' on your remote control. The LED indicator will flash 3 times and turn off, indicating successful pairing for button B.

Note: If you have multiple remotes, repeat the learning process for each remote and each button you wish to pair.

Clearing Codes:

  • Press and hold the 'Learning' button on the receiver board for approximately 8 seconds. The LED indicator will turn ON, then turn OFF. This indicates that all previously learned codes have been successfully cleared. After clearing, the remote will no longer control the receiver until re-paired.

7. User Tips

  • Independent Control (Toggle Mode): If you want each remote button to act as an ON/OFF switch for a single output (e.g., press A once for ON, press A again for OFF), configure the receiver to 'Toggle Mode' by pressing the 'Model' button 3 times during setup.
  • Voltage Compatibility: The receiver itself requires a DC12-48V power supply. However, the relay outputs can switch both DC and AC loads, including 110V or 220V, provided the load current does not exceed 10A and is wired correctly as per the AC wiring diagram.
  • Adding More Remotes: If you purchase additional remotes or controllers, ensure they are 433MHz and use EV1527 learning code. You can then easily pair them with your existing receiver by following the 'Learning' method.

8. Troubleshooting

  • Remote not responding:
    • Check if the remote control's battery is dead.
    • Ensure the remote is properly paired with the receiver. If unsure, try clearing all codes and re-pairing.
    • Verify the receiver is powered correctly (DC12-48V).
    • Check for obstructions or excessive distance between the remote and receiver. The maximum range is 50 meters in open space.
  • Load not switching:
    • Confirm the load is correctly wired to the receiver's output terminals (NO/C/NC).
    • Ensure the load's power supply is active.
    • Check if the load's current draw exceeds the receiver's maximum load current (10A).
    • Verify the receiver's working mode is set as desired (Momentary, Latched, or Toggle).
  • Interference: If experiencing erratic behavior, try relocating the receiver or remote to minimize potential RF interference from other devices.

9. Maintenance

  • Keep the receiver and remote controls clean and dry. Wipe with a soft, dry cloth.
  • Avoid dropping or subjecting the devices to strong impacts.
  • Replace remote control batteries as needed.
  • Periodically check wiring connections for looseness or corrosion.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to your purchase documentation or contact your retailer.

For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact the vendor or manufacturer directly. Please have your model number (AK-RK0E+027AB) and purchase details ready when contacting support.

11. Application Scenarios

The versatility of this RF wireless remote control switch allows for integration into various systems:

Examples of applications including garage doors, gates, motors, and household switches.
Examples of applications including garage doors, gates, motors, and household switches.
  • Garage Doors: Open and close garage doors remotely.
  • Electric Gates: Control access to properties with electric gates.
  • Lighting Systems: Remotely switch lights ON/OFF in homes, offices, or outdoor areas.
  • Automated Curtains/Blinds: Operate motorized curtains or blinds with ease.
  • Motor Control: Suitable for various DC motor applications within the specified voltage and current limits.
  • Household Switches: Convert standard switches into remote-controlled ones for convenience.

© 2024 CENTURY AOKE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.