LAUNCH X431 PRO3 V+ 5.0

Contents

LAUNCH X431 PRO3 V+ 5.0 Diagnostic Tools Auto Scanner

Instruction Manual

1. Introduction

The LAUNCH X431 PRO3 V+ 5.0 is an advanced diagnostic tool designed for automotive professionals. It leverages LAUNCH's cutting-edge diagnostic technology to provide comprehensive vehicle coverage, powerful functions, and precise test results. This device simplifies complex diagnostic tasks, making it an essential tool for any auto mechanic.

Key features include:

  • All System Diagnosis: Establishes data links to all vehicle systems and subsystems.
  • 41+ Reset Functions: Offers a wide range of service functions like Oil Reset, Steering Angle Calibration, EPB Reset, Battery Register, ABS Bleeding, DPF Regeneration, TPMS Reset, Injector Matching, and more.
  • ECU Coding: Allows for matching, relearning, and coding of newly installed ECU modules, and customization of vehicle functions.
  • Active Test (Bi-directional Control): Enables outputting commands to ECUs to activate components and test their functionality.
  • Topology Mapping: Provides a visual representation of vehicle communication networks for efficient diagnosis.
  • VAG Guided Function: Offers step-by-step guidance for Volkswagen Audi Group vehicles.
  • FCA AutoAuth Access: Provides secure gateway access for Fiat Chrysler Automobiles.
  • Global Version: No IP limitations, usable worldwide.
  • 2 Years Free Update: Includes unlimited free software updates for two years from purchase.
  • 5 Years Warranty: Covers quality problems and includes lifetime free technical support.
  • Extensive Vehicle Coverage: Supports over 100 car brands and 20,000+ models from American, European, and Asian markets.
  • Multi-Language Support: Available in 22 languages including English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, and more.
  • Expandable Modules: Compatible with optional add-on tools like SmartLink HD, ADAS Calibration, BST360 Battery Tester, VSP600 Videoscope, i-TPMS, and X-PROG3 for key programming (sold separately).

This manual provides detailed instructions for using your LAUNCH X431 PRO3 V+ 5.0 to ensure optimal performance and safety.

Video: LAUNCH X431 PRO3 V+ 5.0 Product Overview, highlighting its intelligent diagnostics, tablet design, Android OS, processor, RAM, comprehensive connectors, and various reset capabilities.

2. Important Safety Precautions

To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the tool.

⚠️ DANGER

  • When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that cause slower reaction time and result in death or serious personal injury.
  • Please use the included battery and power adaptor. Risk of explosion if the battery is replaced with an incorrect type.
  • DO NOT attempt to operate the tool while driving the vehicle. Have a second person operate the tool. Any distraction may cause an accident.

⚠️ WARNING

  • Always perform automotive testing in a safe environment.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Before starting the engine, put the gear lever in the Neutral position (for manual transmission) or in the Park (for automatic transmission) position to avoid injury.
  • NEVER smoke or allow a spark or flame in the vicinity of the battery or engine. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Wear an ANSI-approved eye shield when testing or repairing vehicles.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltage when the engine is running.
  • To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
  • Automotive batteries contain sulfuric acid that is harmful to skin. Direct contact with automotive batteries should be avoided. Keep ignition sources away from the battery at all times.
  • Keep the tool dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment when necessary.
  • Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
  • Store the tool and accessories in a locked area out of the reach of children.
  • Do not use the tool while standing in water.
  • Do not expose the tool or power adapter to rain or wet conditions. Water entering the tool or power adaptor increases the risk of electric shock.
  • This tool is a sealed unit. There are no end-user serviceable parts inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any inquiry, please contact the dealer.
  • Keep the tool far away from magnetic devices because its radiations can damage the screen and erase the data stored on the tool.
  • Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
  • Do not disconnect the battery or any wiring cables in the vehicle when the ignition switch is on, as this could damage the sensors or the ECU.
  • Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
  • Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
  • When reconnecting the ECU harness connector, be sure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged.

3. Components & Controls

The diagnostic system consists of two main components: the Display Tablet and the VCI (Vehicle Communication Interface) Connector.

3.1 Display Tablet

The tablet serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

LAUNCH X431 PRO3 V+ 5.0 Display Tablet

Image: LAUNCH X431 PRO3 V+ 5.0 Display Tablet showing its diagnostic interface.

Tablet Controls:

  1. POWER Key: Turns the tablet on/off. Press and hold for 8 seconds for forced shutdown.
  2. Microphone: For audio input.
  3. Type-A USB Port: Connects to the VCI connector for diagnosis via USB cable, or to compatible add-on modules (e.g., Videoscope) or USB storage devices.
  4. Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
  5. Front Camera: For capturing images.
  6. LCD Screen: Displays test results and user interface.
  7. Rear Camera: For capturing images.

3.2 VCI Connector

The VCI connector acts as a vehicle communication interface device. It connects to the vehicle's DLC (Data Link Connector) socket via a diagnostic cable to read vehicle data and send it to the tablet.

LAUNCH X431 PRO3 V+ 5.0 VCI Connector

Image: LAUNCH X431 PRO3 V+ 5.0 VCI Connector with indicator lights.

VCI Indicators:

  1. Power Indicator: Illuminates red when the VCI is powered up.
  2. Vehicle Indicator: Illuminates green and flashes when the VCI is communicating with the vehicle.
  3. I/O Indicator: Illuminates blue when the VCI is communicating with the tablet via Bluetooth. Illuminates red when the VCI is connected to the tablet via USB cable.
  4. Diagnostic Connector: Connects to the vehicle's OBD II DLC via the diagnostic cable.
  5. USB Port: Connects the VCI to the tablet for vehicle diagnosis via USB cable.

Note: Remember to remove the VCI connector from the vehicle's DLC after use.

4. Setup

4.1 Initial Use: Charging & Turning On

  1. Use the included power adapter to charge the tablet.
  2. After charging, press the POWER button to turn the tablet on. The system will initialize and display the home screen.

Warning: If the battery remains unused for a long period or is completely discharged, it may not power on immediately. Charge for at least 5 minutes before attempting to turn it on. Always use the included power adapter to avoid damage.

To turn the tool off, press the POWER button for 3 seconds, then tap Power off on the screen.

4.2 Screen Layout & Basic Gestures

The tablet features five on-screen buttons at the bottom:

  • Home: Navigates to the Android home screen.
  • Recent App: Displays recently launched and running applications.
  • VCI Connection: Indicates VCI device connection status.
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

Basic Gestures:

  • Single-tap: Selects an item or launches a program.
  • Double-tap: Zooms in on webpages.
  • Long press: Displays contextual menus.
  • Slide: Navigates between pages.
  • Drag: Moves application icons.
  • Spread apart/Pinch together: Zooms in/out manually.

4.3 System Settings

Change System Language:

  1. On the home screen, tap Settings > System > Language & input > Languages.
  2. Tap Add a language and choose from the list.
  3. Drag the desired language to the top of the list to apply.

Adjust Brightness:

  1. On the home screen, tap Settings > Display > Brightness level.
  2. Drag the slider to adjust. (Reducing brightness conserves battery.)

Set Standby Time:

  1. On the home screen, tap Settings > Display > Advanced > Sleep.
  2. Choose the desired sleep time. (The screen will lock automatically after this period.)

4.4 Network Setup (Wi-Fi)

The tablet has built-in Wi-Fi for online functions like registration, updates, and remote diagnosis.

  1. On the home screen, tap Settings > Network & Internet > WLAN.
  2. Slide the Wi-Fi switch to ON. The tablet will search for available networks.
  3. Select a wireless network. If encrypted, enter the password.
  4. Once Connected appears, the Wi-Fi connection is complete.

Note: Disable Wi-Fi when not needed to conserve battery power.

4.5 Register & Update

New users must register the device to access full functionality and updates.

  1. Tap the application icon on the home screen to launch it, then tap Login.
  2. If you are a new user, tap New Registration. Fill in all required fields (marked with *) and tap Register.
  3. Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope) and tap Activate.
  4. After successful registration, tap OK to navigate to the update center.

Note: The tablet automatically stores login credentials. A stable network connection is required for this function.

5. Connections

5.1 Preparation

  • Ensure the vehicle ignition is turned on.
  • Verify vehicle battery voltage is 11-14 volts.
  • Ensure the throttle is in the closed position.
  • Locate the DLC (Data Link Connector). For most vehicles, it's usually 12 inches from the center of the instrument panel, under or around the driver's side. Refer to your vehicle's service manual if unsure.
Common DLC Locations

Image: Diagram showing common DLC locations in a vehicle (A. Opel, VW, Audi; B. Honda; C. VW; D. Opel, VW, Citroen; E. Changan; F. Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, VW, Audi, GM, Chrysler, Peugeot, Regal, Beijing Jeep, Citroen and other popular models).

5.2 Vehicle Connection

The connection method depends on the vehicle's configuration.

5.2.1 OBD II Vehicle Connection

For OBD II compliant vehicles, use the included diagnostic cable (HD15F to HD15F diagnostic cable + HD15F to OBD II adaptor) to connect the VCI to the vehicle's DLC port.

OBD II Connection Diagram

Image: Diagram illustrating the connection of the VCI (1) via HD15F diagnostic cable (2) and HD15F to OBD II adaptor (3) to the vehicle's DLC port (4).

5.2.2 Non-OBD II Vehicle Connection

For non-OBD II vehicles, select the appropriate adaptor for the vehicle's DLC port type. Replace the HD15F to OBD II adaptor with the target adaptor. Other connection steps remain the same.

Note: If the DLC pin is damaged or has insufficient power, you can power the VCI via:

  • Battery Clamps Cable (not included): Connect one end to the diagnostic cable's power jack and the other to the vehicle's battery.
  • Cigarette Lighter Cable (not included): Connect one end to the diagnostic cable's power jack and the other to the cigarette lighter receptacle.

If performing diagnosis via data cable, connect one end of the data cable to the VCI and the other end to the tablet's USB port.

6. Operating the Diagnostic Tool

6.1 Job Menu Overview

The Job Menu provides access to the main functions of the diagnostic tool:

  • Intelligent Diagnose: Uses VIN information to perform quick tests and access historical diagnostic records from the cloud server.
  • Local Diagnose: Guides you through diagnostic sessions step-by-step.
  • Remote Diagnose: Facilitates instant messaging and remote diagnostic assistance.
  • Service Function: Offers various coding, reset, and relearn functions.
  • TPMS: Configures the tool as a professional TPMS service tool (requires TSGUN device).
  • Software Update: Manages diagnostic software and APK updates.
  • Diagnostic History: Provides quick access to previously tested vehicle records.
  • Feedback: Allows submission of vehicle issues for analysis and troubleshooting.
  • ADAS: Performs Advanced Driver Assistance System calibration (requires specific ADAS calibration tool).
  • Mall: For subscribing to extra software or service functions.
  • Vehicle Coverage: Displays supported vehicle models.
  • Maintenance: Provides abundant maintenance data.
  • User Info: Manages VCI, reports, password, settings, etc.
  • Other Modules: Includes add-on modules, product manual, and FAQ.

6.2 Intelligent Diagnose

This function automatically identifies the vehicle VIN and retrieves information from the remote server, guiding you to the vehicle information page without manual menu selection.

  1. Tap Intelligent Diagnose on the Job menu.
  2. The tablet will attempt to read the vehicle VIN.
  3. If VIN is found, the vehicle information page will appear, listing historical diagnostic records.
  4. If VIN access fails, you can manually enter the VIN or use the VIN recognition module (camera scan).
Topology Mapping Scanner

Image: Topology Mapping Scanner interface, showing vehicle modules and their connection status (Normal, Abnormal, Scanned, Not Scanned, Not Equipped).

6.3 Local Diagnose

This mode requires manual menu selection and on-screen instruction following.

  1. Tap Local Diagnose to enter the vehicle selection page.
  2. Choose a vehicle model (e.g., TOYOTA) and the desired test item.

Diagnostic Functions:

  • System Scan: Quickly scans all installed systems on the vehicle.
  • Select Detection: Manually select specific systems for scanning.
  • Smart Detection: Accesses all electronic control units and generates a detailed health report. Malfunctioning systems are highlighted in red with DTC quantity.
  • Report: Saves current diagnostic data in text format. Reports are stored in User Info > My Report > Health Reports.
  • Compare Results: Compares pre-repair and post-repair reports to identify cleared and unfixed DTCs.
  • Diagnostic Plan: Provides diagnostic plans and repair solutions for detected DTCs.
  • Clear DTCs: Clears existing diagnostic trouble codes. (Note: Clearing codes does not fix the problem; proper repairs are necessary.)
  • Read Fault Code: Displays detailed information of DTC records.
  • Read Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU. You can view data in text, graph, or combined formats.
  • Freeze Frame: Views a snapshot of critical parameter values at the time a DTC was set.
  • Actuation Test: Accesses vehicle-specific subsystem and component tests to drive actuators and determine system integrity.
  • Special Functions: Offers coding, reset, relearn, and other service functions.
All System Diagnostic and Bi-directional Test

Image: All System Diagnostic features (Read/Clear DTCs, Live Data Stream, Active Test, Topology Mapping, Auto VIN, Online Feedback) and Bi-directional/Active Test examples (Operate Mirrors, Radiator Fan, Injector Buzz Test, Open Brakes Test, Cycling A/C, Clutch on/off, Acceleration Device Test, Oil Pressure Control Test, Parking Brake Test, Turn ON/OFF Lights, Open/Close Windows, Fuel Rail Pressure Test).

6.4 Service (Reset) Functions

This module provides quick access to commonly performed service functions. Due to continuous improvements, available functions may change. Regularly check for updates.

41+ Comprehensive Services

Image: 41+ Comprehensive Services including Injector Coding, Oil Reset, BMS Relearn, EPB Reset, Windows, Throttle Calibration, Seat Initialization, Airbag Matching, Sunroof Reset, TPMS Reset, Transmission Relearn, Headlight Adjustment, A/F Calibration, SUS Reset, Gear Matching, TEC Relearn, and more.

6.5 ECU Coding

This function allows for manufacturer-specific reprogramming and full diagnostic capability.

  • Component Matching: Match, relearn, and code newly installed ECU modules after repairs or replacements.
  • Customization: Change market-specific settings to activate higher-level car functions and disable unneeded features.
Powerful ECU Coding

Image: Powerful ECU Coding, showing examples like Movement Pointer, Automatic Lock, Reverse Rearview Mirror Down, Windows Close When Rain. Benefits include Performance Enhancement, Personalized Driving Experience, Comfort Adjustment, Vehicle Safety and Security. Also highlights Online Coding, Online Parameterization, and Online Calibration.

6.6 Remote Diagnose

This module helps repair shops or technicians diagnose remote vehicles and facilitates instant messaging for faster repairs.

Device-To-Device Remote Diagnosis:

  1. Tap Remote Diagnose on the Job menu.
  2. Select REQUEST CONTROL REMOTE DEVICE or INVITE REMOTE DIAGNOSE ASSISTANT.
  3. Follow on-screen prompts to connect and perform diagnosis.

Device-To-PC Remote Diagnosis:

  1. Slide the remote diagnosis switch to ON.
  2. Notify the partner of the PC client website (e.g., http://remote.x431.com).
  3. The partner inputs their technician account, password, and your device's serial number to connect remotely.

Note: During remote diagnosis, it's generally not recommended to execute other actions on the tablet. Diagnostic reports are automatically generated.

7. Maintenance

7.1 Software Update

This module allows you to update diagnostic software, the main application (APP), and frequently used software.

  1. Go to Software Update on the Job Menu.
  2. Tap the Downloaded tab to view available updates. Software is categorized into Common, Frequently Used Vehicle, and Other Vehicle software.
  3. Select the desired software and tap Update to start downloading and installation.
  4. If your software subscription is due, the system will prompt you to renew it via the Mall.

7.2 User Info Management

This section allows you to manage personal information and VCI devices.

  • My Report: View, delete, or share saved diagnostic reports (Health Reports, Recorded Data, Remote Reports).
  • VCI Management: Manage activated VCI devices and deactivate pairing.
  • Activate VCI: Activate a VCI device if skipped during initial setup.
  • Firmware Fix: Upgrade and fix diagnostic firmware. Do not interrupt power during this process.
  • Sample: Manage recorded data stream sample files.
  • My Order: Check the status of your orders.
  • Subscription Renewal Card: Check the status of your subscription using a 12-digit card number.
  • Profile: View and configure personal information.
  • Change password: Modify your login password.
  • Settings: Configure application settings and view software version information.
  • Units: Configure measurement units (Metric or English).
  • Shop Information: Define your workshop details (Workshop, Address, Telephone, Fax, License Plate) to be automatically included in diagnostic reports.
  • Printer Set: Establish wireless connection with a Wi-Fi printer (LAUNCH Wi-Fi Printer or external System printer) for printing reports.
  • Orientation: Set the screen display orientation.
  • Clear Cache: Clears the App cache, restarting the App.
  • About: Contains software version information and disclaimers.
  • Diagnostic Software Auto Update: Sets whether automatic updates are enabled.
  • Device Account Management: Manages sub-accounts for VCI usage by different users.
  • Login/Logout: Log out or log in to your user ID.
  • Diagnostic Software Clear: Hides/clears infrequently used diagnostic software to free up space.

7.3 Add-on Modules

The X431 PRO3 V+ 5.0 is compatible with various add-on modules to extend its functionality:

  • ADAS (Calibration): Calibrates camera-based and radar-based driver assistance systems.
  • TPMS: Configures the tablet as a TPMS activation and diagnostic tool (requires TSGUN device).
  • Oscilloscope: Helps diagnose faults on automotive electronic equipment and wiring.
  • S2-2 Sensorbox: Diagnoses and simulates vehicle sensor faults.
  • S2-2 Multimeter: Measures physical parameters like voltage, resistance, and frequency.
  • BST360 (Battery Tester): Fixes battery detection, performs cranking tests, and generates health reports (requires Bluetooth battery tester).
  • Immobilizer Programmer: Performs read-write functions for vehicle keys, EEPROM, MCU, and engine/gearbox ECUs (requires specific immobilizer programmer).
  • Videoscope: Checks unreachable parts of the engine, fuel tank, braking system (requires Videoscope device).
Extension X-431 Modules

Image: Extension X-431 Modules, showing Smartlink HD (diagnose 24V heavy-duty trucks & commercial vehicles), ADAS Calibration, TSGUN TPMS (TPMS programming, activation, relearn), VSP600 Video Scope (inspect unreachable areas), X431 WIFI Printer (print out diagnostic data/reports), BST360 Battery Tester (perform battery & cranking tests), and X-PROG3 (for key programming).

8. Troubleshooting (FAQ)

8.1 How to save power?

  • Turn off the screen while the tool is idle.
  • Set a shorter standby time.
  • Decrease the brightness of the screen.
  • Turn off WLAN connection if not required.
  • Disable GPS function if GPS service is not in use.

8.2 Communication error with vehicle ECU?

Please confirm:

  1. Whether the diagnostic connector is correctly connected.
  2. Whether the ignition switch is ON.
  3. If all checks are normal, send vehicle year, make, model, and VIN number to us using the Feedback feature.

8.3 Failed to enter into vehicle ECU system?

Please confirm:

  1. Whether the vehicle is equipped with this system.
  2. Whether the VCI dongle is correctly connected.
  3. Whether the ignition switch is ON.
  4. If all checks are normal, send vehicle year, make, model, and VIN number to us using the Feedback feature.

8.4 How to download the diagnostic App after resetting the tablet?

Note: Before registration, ensure the network is properly connected.

After the tablet has been successfully reset, follow these steps:

  1. Launch the browser. The default official Launch website (www.x431.com) should open.
  2. Tap "Login", input your username and password, and tap "Log In."
  3. Make sure the serial number is correct, tap "APP application program" and the Download icon to start downloading.
  4. After download, follow on-screen instructions to install.
  5. Use existing username and password to login and go to the update center to download diagnostic software.

8.5 What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language. After setting the system to your preference language, go to the update center to download the diagnostic software of the corresponding language. If the software is still in English, it indicates that the software for your chosen language is under development.

8.6 How to retrieve the login password?

  1. Tap the application icon on the home screen to launch it.
  2. Tap Login on the upper right corner of the screen.
  3. Tap Retrieve Password.
  4. Input product S/N and follow on-screen prompts.

8.7 How to backup system data?

The tool has two USB ports: Type A (for external storage) and Type C (for PC data backup). It is strongly recommended to use the Type C interface for PC backup.

Exchanging data with an external USB storage device:

  1. Plug the USB storage device into the USB Type A interface.
  2. Swipe the screen from the top to select the USB drive.
  3. Exchange data.

Exchanging data with a PC:

  1. On the home screen, tap Settings > USB Management. Slide the USB Switch to OFF to enable the USB Type C interface. (By default, the USB Switch is ON, disabling Type C for data exchange).
  2. Plug the Type C end of the included data cable into the tool's Type C port, and the other end to the PC's USB port.
  3. After the PC identifies the tool, you can perform data backup.

9. Specifications

9.1 Display Tablet Technical Parameters

FeatureSpecification
Operating SystemAndroid 10.0
ProcessorQuad core 2.0GHz
RAM/ROM4GB/64GB
Screen Size10.1 inch
Display Resolution1920x1200
CameraFront-facing 5.0MP + Rear-facing 8.0MP
Battery6300mAh
ConnectionBluetooth, WiFi
Wireless FunctionYes
Is Batteries IncludedYes
External Testing CertificationCCC
Product Dimensions13.78"L x 5.91"W x 9.84"H
Item Weight13.2 pounds
Working Temperature0°C ~ 50°C
Storage Temperature-20°C ~ 70°C
Relative Humidity20% ~ 90%

9.2 VCI Connector Technical Parameters

FeatureSpecification
Working Voltage9~18V
Power Consumption<2.0W

10. Warranty & Support

10.1 Warranty Information

LAUNCH® electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of the buyer's business.

This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.

Final determination of defects shall be made by LAUNCH in accordance with stipulated procedures.

10.2 Customer Service

If you have any questions on the operation of the unit, please contact your local dealer or customer service center:

  • Telephone: 86-755-25938674
  • E-mail: DOD@cnlaunch.com

10.3 Item Guides & Documents

A user manual in PDF format is available for detailed instructions. You can view it here.

11. User Tips

  • Vehicle Compatibility: Before purchasing or using, always verify if the tool is compatible with your specific vehicle make, model, and year. While it covers a wide range, some specialized vehicles (e.g., Massey Ferguson 5s) may require specific adaptors or software. Contact customer service for confirmation if unsure.
  • Regional Software: For users outside of standard regions (e.g., Peru-Lima), confirm if any specific authorizations or additional software are needed for full functionality in your country. The Global Version typically has no IP limit, but local regulations or vehicle models might have unique requirements.
  • Regular Updates: Take advantage of the 2 years of free updates to ensure your diagnostic tool has the latest vehicle models, functions, and bug fixes. This keeps your tool performing optimally and expands its capabilities.
  • Explore Add-on Modules: If you have specialized needs (e.g., heavy-duty vehicles, TPMS, key programming), consider the compatible add-on modules to enhance the tool's versatility.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.