BUCKLOS G3CS

Contents

BUCKLOS G3 Disc Brake Rotor User Manual

Model: G3CS

1. Product Overview

The BUCKLOS G3 Disc Brake Rotor is designed for various bicycle types, offering reliable braking performance. It features a hollow-out design for strong heat dissipation and is made from durable stainless steel.

BUCKLOS G3 Brake Rotors in various sizes and colors
Figure 1: BUCKLOS G3 Brake Rotors available in 160mm, 180mm, and 203mm sizes, and multiple colors.

2. Safety Information

Warning! Failure to comply with the following safety precautions may result in personal injury, property damage, or product malfunction. Read and follow all instructions carefully before use.

  • Keep the product away from children under 14 years old to avoid choking hazards (for small parts) or other injuries.
  • Do not overload the product or use it with incompatible accessories that are not approved by the manufacturer.
  • Do not modify, disassemble, or refit the product without authorization, as this will invalidate compliance certifications and cause potential safety hazards.
  • Do not use the product in extreme environments (e.g., high temperature, high humidity, flammable/explosive areas) beyond the specified range.
  • Do not use the product if it is damaged (e.g., cracked casing, frayed wires). Contact after-sales service for repair or replacement; unauthorized repair is prohibited.
  • Dispose of the product in accordance with EU WEEE Directive (2012/19/EU) and local waste recycling regulations. Do not discard it as household waste.

3. Installation

The BUCKLOS G3 Disc Brake Rotor is designed for easy installation. Each rotor comes with 6 T25 disc screws for mounting.

  1. Install the disc to the wheel hub.
  2. Insert the 6 T25 screws and tighten them to the appropriate torque of 6.2 N.m.
  3. Tighten the disc screws clockwise and in sequence (e.g., in a star pattern) to ensure even pressure and secure fitting.
Disc brake rotor installation on a bicycle wheel
Figure 2: Illustration of disc brake rotor installation on a bicycle wheel hub.
Detailed diagram for disc brake rotor installation and screw tightening sequence
Figure 3: Detailed installation diagram showing screw torque and tightening sequence.

4. Operating Instructions

The BUCKLOS G3 Disc Brake Rotor functions as a component of your bicycle's hydraulic disc braking system. Proper operation involves applying brake levers smoothly and progressively to control speed and stop safely. Ensure your brake pads are compatible with disc rotors and are correctly aligned for optimal performance and to prevent premature wear or noise.

Bicycle with blue disc brake rotor installed
Figure 4: Example of a BUCKLOS G3 Disc Brake Rotor installed on a bicycle.

5. Maintenance

Regular maintenance ensures the longevity and performance of your disc brake rotors.

  • Cleaning: Clean rotors regularly with a clean cloth and isopropyl alcohol to remove dirt, oil, and brake dust. Avoid using lubricants or harsh chemicals that can contaminate the braking surface.
  • Inspection: Periodically inspect the rotor for signs of wear, cracks, bends, or discoloration. The minimum recommended thickness is typically 1.5mm. If the rotor is below this, or shows significant damage, it should be replaced.
  • Fastener Check: Ensure all mounting screws are securely tightened to the specified torque (6.2 N.m). Loose screws can lead to noise and reduced braking efficiency.
  • Heat Dissipation: The hollow design aids in heat dissipation. Keep the rotor clear of debris to maintain optimal cooling.
Close-up of hollow-out design for heat dissipation
Figure 5: Close-up view of the rotor's hollow-out design, which enhances heat dissipation.

6. Troubleshooting

  • Brake Noise: If you experience squealing or grinding noises, check for contaminated brake pads or rotors. Clean rotors with isopropyl alcohol and inspect pads for wear or glazing. Ensure proper alignment of the brake caliper.
  • Reduced Braking Performance: This can be caused by worn pads, contaminated rotors, air in the hydraulic system (for hydraulic brakes), or a bent rotor. Inspect all components and address as necessary.
  • Vibrations: Vibrations during braking might indicate a bent rotor or loose mounting bolts. Check rotor trueness and ensure bolts are tightened to the correct torque.

If issues persist after basic troubleshooting, it is recommended to consult a professional bicycle mechanic.

7. Specifications

AttributeDetail
ModelG3CS
BrandBUCKLOS
MaterialStainless Steel
Sizes Available160MM, 180MM, 203MM
Weight (approx.)160MM: 94±5g, 180MM: 132±5g, 203MM: 180±5g
Thickness1.8mm
ColorsBlack, Red, Blue, Purple, Yellow, Green, Silver
FeaturesHardness 39, Smooth Surface, Offset 0.05(S), Hollow Design, CNC Process
Included Screws6pcs T25 Disc Screws
Recommended Torque6.2 N.m
Compatible UseBMX, Cruisers, Kids' Bikes, Mountain Bikes, Road Bicycles
Braking SystemHydraulic Disc Brake (Hydraulic Brake Pad)
OriginMainland China
Product Information table for BUCKLOS G3 Disc Brake Rotor
Figure 6: Product information detailing model, brand, material, weight, color, size, and features.
Size measurement of disc brake rotor showing 44mm diameter and 1.80mm thickness
Figure 7: Size shot illustrating the rotor's diameter (44mm) and thickness (1.80mm).
Weight measurements for 160mm, 180mm, and 203mm rotors
Figure 8: Lightweight design showcasing the approximate weights for different rotor sizes.

8. User Tips

  • Bedding-in New Rotors: After installation, perform a proper bedding-in procedure for new rotors and pads. This involves several cycles of moderate braking from speed to allow the pad material to transfer evenly to the rotor surface, optimizing braking power and reducing noise.
  • Color Customization: With multiple color options available, you can choose a rotor that matches your bike's aesthetic or adds a personal touch.
  • Regular Checks: Make it a habit to quickly check your rotors for any visible damage or contamination before each ride, especially after riding in wet or muddy conditions.
Multiple colored disc brake rotors installed on bicycles
Figure 9: BUCKLOS G3 Disc Brake Rotors are available in multiple colors to personalize your bike.

9. Compliance Markings & Regulations

This product is affixed with the CE Marking, indicating conformity with applicable EU directives. The CE Marking shall not be altered or removed without permission.

Applicable Regulations & Harmonized Standards

This product complies with the essential requirements of the following EU directives and harmonized standards:

CategoryEU Directive / Harmonized StandardNumber & Date
Hazardous Substances RestrictionRoHS 2.0 Directive2011/65/EU, amended by (EU) 2015/863
Chemical Substances RegulationREACH Regulation(EC) No 1907/2006
Electromagnetic Compatibility (for electrical products)EMC Directive2014/30/EU

For a complete list of applicable harmonized standards, please contact the manufacturer or EU Authorized Representative.

10. Warranty and Support

For any questions, concerns, or support regarding your BUCKLOS G3 Disc Brake Rotor, please contact the manufacturer, Fujian Quantu Trading Co., Ltd., or your point of purchase. Please refer to the official product documentation for specific warranty terms and conditions.

An electronic version of the user manual (PDF) may be available for download from the manufacturer's website or provided by the seller. The PDF can be accessed at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.