Introduction
Thank you for choosing the HUANCI Q5 Electric Bike. This manual provides important safety information, assembly instructions, operating procedures, maintenance tips, and specifications to ensure safe and correct use of your electric bike. Please read it carefully before your first ride and keep it for future reference.
Disclaimer: ⚠️Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
For any questions or assistance, please contact your dealer immediately.
Safety Notes
Your safety and the safety of others are paramount. Always adhere to the following safety guidelines:
- Always follow local traffic laws and regulations. Do not ride the electric bike on motorways where it is prohibited.
- Do not park the electric bike in building foyers, evacuation corridors, or near safety exits.
- Avoid riding in areas with severe water accumulation, as unknown road conditions can cause danger. The bike has an IPX6 water resistance rating, but this does not mean it is fully submersible.
- Do not ride the electric bike under the influence of alcohol.
- The electric bike is not suitable for pregnant women or users over 60 years old.
- Do not ride the electric bike up and down stairs or attempt to jump over obstacles.
- The maximum load capacity of the electric bike is 120kg. Do not exceed this limit.
- It is forbidden for multiple people to ride the same electric bike at the same time or to ride with children in your arms.
- Do not remove your hands from the handlebar while riding.
- Do not modify the electric bike or its battery without permission. Unauthorized modifications can lead to unstable operation, electronic system failure, battery explosion, or fire.
- When riding in rain or snow, braking distance will be extended. Slow down and avoid sudden braking.
- Use the rear brake for normal stopping. For emergency braking, use both front and rear brakes simultaneously. Avoid using only the front brake during high-speed emergency braking to prevent rolling over.
- Before each ride, thoroughly check the bike's body and tires for any signs of looseness or damage.
- When braking, especially at intersections, be aware of your surroundings to prevent accidents involving yourself, others, or animals.
- Always turn off the power button when walking with the electric bike to prevent accidental acceleration.

Packing List
Upon receiving your HUANCI Q5 Electric Bike, please verify that all components are included:
- Electric Bike (1 unit)
- Seat (1 unit)
- Pedals (2 units)
- Wrench (2 units)
- Quick Release (1 unit)
- Charger (1 unit)
- Kickstand (1 unit)
- User Manual (1 unit)
If any items are missing, please contact your dealer immediately.

Product Overview
Familiarize yourself with the main components of your electric bike:
- Rear wheel brake
- Grip
- Light & Function button
- Front wheel brake
- Throttle
- Gear shift adjustment
- Display
- Front light
- Frame
- Battery
- Brake
- Wheel
- Seat
- Seat adjustment wrench
- Motor
- Pedal
- Gearwheel

Assembly Instructions
Follow these steps to assemble your electric bike:
1. Install the Handlebar
- Remove the 4 screws in front of the stem using the provided allen wrench.
- Place the handlebar into the stem.
- Fasten the fasteners and place the screws into the stem to lock it securely.
2. Install the Front Wheel
- Install the front wheel onto the front fork and secure it with the quick release wrench.
3. Install the Pedals
- Install the pedal marked "L" (Left) on the left crank. Note that the thread direction is counter-clockwise for assembly.
- Install the pedal marked "R" (Right) on the right crank. Note that the thread direction is clockwise for assembly.
4. Install the Bike Seat
- Open the seat tube locking wrench.
- Insert the seat into the tube and adjust the height to your preference.
- Tighten the wrench to secure the seat.
- Note: Pay attention to the safety line when adjusting the seat height. The safety line must not exceed the saddle tube to prevent danger.
Operation
1. Pre-Ride Checks
- Wear appropriate safety gear, including helmets, knee pads, and elbow pads.
- Adjust the seat to a comfortable height. The ideal height allows your knee to be at a 25-35 degree angle when your foot is at the lowest pedal point.
- Press and hold the power button for 3 seconds to switch on the electric drive system. Check the battery level on the display.
2. Riding the Bike
- Hold the brake tightly, straddle the bike with your right foot, step on a pedal, and sit down.
- Slowly release the brake and gently press the left foot on the ground to initiate forward motion. Use your right foot to push forward forcefully, then alternate pedaling with both feet. Maintain a firm grip on the handlebar with both hands.
3. Riding Modes
The HUANCI Q5 Electric Bike offers three riding modes:
- Fitness Mode: Turn off the electric lock and ride manually, like a traditional bicycle, for exercise.
- Electric Power-Assisted Mode: Turn on the electric door lock. The system automatically provides electric assistance based on your pedaling intensity, extending range and making riding easier.
- Electric Mode: Turn on the electric power and use the accelerator to ride without pedaling. This mode conserves physical effort.
4. Throttle and Braking
- To slow down, release the throttle knob.
- For emergency braking, firmly grip the brake handles.
- Note: When using the throttle for the first time, turn it slowly to avoid sudden acceleration.
5. Display and Buttons
The display shows speed, trip distance (TRIP), battery level, current speed, speed unit, and total mileage (ODO).
- Power Button (ON/OFF): Hold for 3 seconds to switch the electric drive system on/off. The system automatically turns off if left idling for more than 10 minutes.
- Assist Mode Selection: Use the '+' and '-' buttons to select the desired assist level (Level 1 to Level 3).

Battery Information and Charging
1. Battery Parameters
| Parameter | Value |
|---|---|
| Name | Battery |
| Type | Li-ion battery |
| Voltage | 48V |
| Battery Capacity | 10AH / 15AH / 20AH (depending on model) |
| Max Charging Voltage | 54.6V |
| Max Charging Current | 2A |
| Charging Time | 6-7 hours |
| Working Temperature | -10°C to 40°C |
| Charging Temperature | 0°C to 40°C |
| Storage Time (-10°C to 40°C) | 3 months (full charge) |
2. Battery Safety Guidelines
- Charge and use the battery within the specified temperature range for optimal performance and stability.
- Always unplug the charger before installing or using the battery.
- Do not disassemble or pierce the battery pack shell. Avoid metal objects contacting battery terminals to prevent short circuits, damage, or injury.
- Do not expose the battery to water, fire, or high temperatures (above 50°C). This can cause battery failure, overheating, or fire.
- If the battery is suspected of water exposure, stop using it immediately and send it for after-sales testing.
- Only use the original charger provided with the bike. Using other chargers may damage the battery or cause fire.
- If the battery is damaged, emits a peculiar smell, smoke, or overheats, discontinue use immediately and prevent contact with other objects.
- Fully charge the battery after each use before storing to prolong its life.
- Avoid storing the battery in temperatures above 50°C or below -10°C.
- For storage longer than 30 days, fully charge the battery, store it in a cool, dry place, and recharge it at least once every 90 days. Failure to do so may damage the battery, and such damage is not covered by warranty.
- Avoid completely exhausting the battery before recharging. Charge as soon as possible to significantly extend battery life.
- Battery performance and range decrease in cold environments (below 0°C). At -10°C, the cruising range may be half or less than at room temperature.
- Dispose of used batteries according to local regulations to prevent environmental pollution.
3. Charging Steps
There are two methods for charging your HUANCI Q5 Electric Bike:
- Method A (Direct Charging): Open the dust cover on the battery, insert the DC plug of the charger into the charging port on the bike. Then, plug the AC plug of the charger into a 100-240V; 50/60Hz AC power socket. The indicator light will turn red, indicating charging has started.
- Method B (Battery Removal Charging): Remove the battery from the bike (refer to Battery Removal Diagram in Assembly section). Insert the DC plug of the charger into the battery's charging port. Then, plug the AC plug of the charger into a 100-240V; 50/60Hz AC power socket. The indicator light will turn red, indicating charging has started.
Important: Only use the original standard power adapter provided with your bike. Using other adapters may cause danger due to power mismatch.
Daily Maintenance
1. Cleaning and Storage
- To clean the electric bike, wipe with a damp, soft cloth. Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents, as these can damage the bike's appearance and internal structure.
- Do not use high-pressure water guns to spray or flush the bike. Ensure the bike is turned off, the charger unplugged, and the charging port dust cover fastened before cleaning to prevent electric shock or damage from water ingress.
- Store the electric bike in a cool, dry indoor place. Avoid prolonged outdoor storage, as sun exposure, extreme temperatures (overheating or cold) can accelerate wear and aging of the bike's appearance, tires, and lithium battery.
2. Tire Inflation and Maintenance
- The tires are pneumatic. Inflate them when the tire height drops by 20-30%.
- The recommended inflated tire pressure is 280 Kpa - 320 Kpa.
- Check and inflate the tires at least once every 2-3 months. Regular inspection helps reduce punctures and extends tire life.

Troubleshooting
If you encounter any issues with your HUANCI Q5 Electric Bike, please consider the following general advice:
- Power On Issues: Ensure the battery is properly installed and charged. Check that the power button is held for 3 seconds to activate the system.
- Motor Not Assisting: Verify that the electric lock is engaged and the correct assist mode is selected. Check battery level.
- Braking Problems: Inspect brake levers and cables for proper tension and function. Ensure disc brakes are clean and free from obstruction.
- Unusual Noises: Stop riding immediately and inspect the bike for loose parts, rubbing components, or foreign objects.
For persistent problems or issues not covered here, please contact your dealer or qualified service technician for assistance.
Specifications
Bike Specifications
| Parameter | Value |
|---|---|
| Product Name | Electric bike |
| Model Number | Q5 |
| Unfold Size | 1800 x 745 x 1050mm |
| Net Weight | 28kg |
| Max Load | 120kg |
| Max Speed | 57km/h (unloaded) |
| Range per Power | 31 - 60 km (Pure electric), 100-120km (Assist mode) |
| Climbing Angle | 30° (Max Uphill) |
| Working Temperature | -10°C to 40°C |
| Storage Temperature | -10°C to 40°C |
| Frame Material | 6061-T6 Aluminum Alloy Removable Battery Frame |
| Wheel Size | 27.5” |
| Tires | Anti-slip and wear-resistant 27.5inch tires |
| Brakes | Hydraulic brakes, 180mm brake disc |
| Suspension | Front shock absorber |
| Mechanical Variable Speed | 7 speed mechanical transmission system (SHIMANO) |
| Headlights | 30 meters of effective illumination |
| Waterproof Rating | IPX6 |
| Suitable Height | 162cm ~ 190cm |
Motor Parameters
| Parameter | Value |
|---|---|
| Motor Type | Permanent magnet brushless |
| Motor Power | 2000W (Max), 650W (Rated) |
| Rated Voltage | 48V |
| Kinetic Energy Conversion Efficiency | 85% |
| Torque | 95N.M |

User Tips
- Rider Height Compatibility: For riders around 163cm tall, check the bike's dimensions and adjustable seat height to ensure a comfortable and safe riding posture. The suitable height range is 162cm ~ 190cm.
- Frame Size: The frame material is 6061-T6 Aluminum Alloy. For specific frame size in inches, refer to the detailed specifications or contact customer support if not explicitly listed.
Warranty and Support
Your HUANCI Q5 Electric Bike has passed quality control inspection and is ready for use.
- Warranty Period: 1 year.
- Warranty Card: Please retain your warranty card and purchase invoice as proof of purchase. These documents are required for any warranty claims.
- Invalidation of Warranty: The warranty may be void if the warranty card is not provided, or if it has been altered.
- User Manual PDF: A detailed user manual in PDF format is available for download: Download User Manual (PDF).
For any support or service inquiries, please contact your dealer with your purchase details.