JENABOM 3.6V Rechargeable Cordless Screwdriver

Contents

JENABOM 3.6V Rechargeable Cordless Screwdriver

Instruction Manual

1. Introduction

Thank you for choosing the JENABOM 3.6V Rechargeable Cordless Screwdriver. This manual provides essential information for the safe and efficient use of your new tool. Please read it thoroughly before operation and keep it for future reference. This cordless screwdriver is designed for small home projects, handicrafts, and furniture assembly, offering convenience and versatility with its compact design and adjustable form factor.

2. Safety Information

  • Always wear appropriate personal protective equipment, such as safety glasses, when operating the screwdriver.
  • Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
  • Do not force the power tool. Use the correct power tool for your application.
  • Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
  • Do not use the screwdriver on cement walls or other hard masonry surfaces. It is designed for wood and plastic.

3. Package Contents

Verify that all items listed below are included in your package:

  • JENABOM 3.6V Cordless Screwdriver
  • USB Charge Cable (Type-C)
  • HSS Drill Bits
  • Hex Sockets
  • Magnetic Bit Holder
  • Flexible Extension Shaft
  • 50mm Screwdriver Bits
  • 25mm Screwdriver Bits
  • Toolbox (for certain configurations)
Included accessories for JENABOM cordless screwdriver
Figure 1: Included accessories: Toolbox, HSS Drill Bits, Hex Sockets, Magnetic Bit Holder, Flexible Extension Shaft, 50mm Screwdriver Bits, 25mm Screwdriver Bits, USB Charge Cable.

4. Specifications

FeatureSpecification
BrandJENABOM
Voltage3.6V
No-Load Speed1800 rpm
Power SourceBattery
Motor TypeBrushless
UseHome DIY
CertificationCE
Charging Time1-2 hours (max 3 hours)
Operating Time (Full Charge)40-60 minutes
Screwdriver Length (straight)21.5 cm (8.46 in)
Length with Flexible Extension45 cm (17.71 in)
MaterialPlastic, Metal
Screwdriver dimensions and use with flexible extension
Figure 2: Screwdriver dimensions: 21.5cm (8.46in) in straight form, 45cm (17.71in) with flexible extension shaft. Also shows use with flexible shaft.

5. Setup

5.1 Charging the Screwdriver

Before first use, fully charge the screwdriver. Connect the provided USB Type-C charge cable to the charging port on the screwdriver and to a compatible USB power source (e.g., computer, wall adapter). The charging time is typically 1-2 hours, and should not exceed 3 hours. A fully charged battery provides approximately 40-60 minutes of continuous use.

Screwdriver with Type-C charging cable and various bits
Figure 3: The screwdriver is charged via a USB Type-C cable.

5.2 Changing the Form Factor

The screwdriver can be used in two configurations: a pistol grip for ergonomic handling or a straight form for reaching into tighter spaces. To switch between these forms, press the designated switch (often located near the pivot point) while rotating the handle to the desired position.

Screwdriver form factor transformation
Figure 4: Screwdriver form factor transformation: pistol grip (01) and straight (02). To change, press the switch while rotating the end.

5.3 Attaching Bits and Accessories

The screwdriver features a self-lock joint to securely hold bits. Simply push the desired bit (screwdriver bit, HSS drill bit, or hex socket) into the chuck until it locks into place. For extended reach or working in awkward angles, attach the magnetic bit holder or the flexible extension shaft before inserting the working bit.

6. Operation

6.1 Controls and Features

Screwdriver features diagram
Figure 5: Screwdriver features: Self-lock joint to stabilize the drill more firmly, Rotary opening suitable for different angles of operation, Two-way drill switch for convenient installation and removal of nails, ON/OFF switch for easy use, Non-slip handle for safer work.
  • ON/OFF Switch: Located on the handle for easy activation.
  • Two-way Drill Switch: This switch controls the rotation direction (forward for screwing in, reverse for screwing out).
  • Self-lock Joint: Ensures bits are held firmly during operation.
  • Rotary Opening: Allows for adjustment of the screwdriver's angle, complementing the form factor change.
  • Front LED Light: Illuminates the work area for improved visibility.

6.2 Screwing In and Out

Select the appropriate bit and attach it securely. Position the bit on the screw head. Use the two-way drill switch to select the desired rotation direction (forward for screwing in, reverse for screwing out). Press the ON/OFF switch to operate the screwdriver. Apply gentle, steady pressure. Avoid over-tightening screws.

Demonstration of screwing in and screwing off
Figure 6: Demonstration of screwing in and screwing off actions.

6.3 Using the Flexible Extension Shaft

For screws in hard-to-reach areas or at awkward angles, attach the flexible extension shaft to the screwdriver's chuck, then insert the desired bit into the extension shaft. This allows for greater maneuverability.

Examples of screwdriver use including flexible shaft
Figure 7: Examples of use: furniture installation, working in tight spaces with flexible shaft.

7. Maintenance

  • Cleaning: After each use, wipe the screwdriver body with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings free of dust and debris.
  • Bit Care: Clean bits regularly. Replace worn or damaged bits to ensure efficient and safe operation.
  • Storage: Store the screwdriver and its accessories in a dry, cool place, away from direct sunlight and moisture. If a toolbox is provided, use it for organized storage. Ensure the screwdriver is fully charged before long-term storage to maintain battery health.
  • Battery: The integrated battery does not require user maintenance. Avoid fully discharging the battery frequently to prolong its lifespan.

8. Troubleshooting

ProblemPossible CauseSolution
Screwdriver does not turn onBattery is dischargedCharge the screwdriver for 1-2 hours.
Screwdriver lacks powerBattery is lowRecharge the battery.
Bit slips or does not engage screwIncorrect bit size/type; Worn bit; Bit not fully insertedEnsure correct bit for screw head; Replace worn bit; Push bit firmly into chuck until locked.
Screwdriver stops during operationOverload protection activated; Battery dischargedReduce pressure; Allow tool to cool; Recharge battery.
Cannot drill into materialMaterial is too hard (e.g., cement); Incorrect drill bitThis tool is not for masonry; Ensure HSS drill bits are used for wood/plastic only.

9. User Tips

  • For delicate tasks, start with a lower speed or use manual turning if available, to avoid stripping screws or damaging surfaces.
  • Always select the correct bit size and type for the screw head to prevent cam-out and damage to both the screw and the bit.
  • When working in tight spaces, utilize the straight form factor and the flexible extension shaft for improved access and control.
  • Keep your bits organized in the provided toolbox or a bit holder to easily find the right one and prevent loss.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.