1. Product Overview
The Spitz Plus (GL-X2000) is a dual-SIM 4G LTE Wi-Fi 6 cellular gateway designed to provide fast, reliable connections, especially in remote areas and during road trips. It features 3-Carrier Aggregation, streaming data on three carrier bands simultaneously for 3x available bandwidth to avoid congestion. The router offers four internet access methods: Cellular (SIM cards), Ethernet, Repeater, and Tethering. It supports multi-WAN (failover and load-balancing), VPN (OpenVPN and WireGuard), parental controls, AdGuard Home, port forwarding, Tailscale, and more.


Highlighted Features
- Qualcomm-powered Mainboard & 4G Module: Boosts performance and reliability.
- Dual SIM Flexibility: Allows easy carrier switching for optimal signal anywhere.
- Interchangeable External Antennas: Provides maximum Wi-Fi 6 and 4G LTE signal reach and stability.
- Fastest 4G CAT12 Router: 3-carrier aggregation reduces congestion and boosts speed.
- Wi-Fi 6 Technology: Delivers AX3000 speeds for seamless, high-capacity connectivity.
- Dual Gigabit Ports: Offers ultra-fast wired connections for heavy usage.
- Extended Coverage with Band 71: Ensures superior T-Mobile signal even in remote areas.
2. Package Contents
The Spitz Plus (GL-X2000) package includes the following items:
- 1 x Spitz Plus (GL-X2000) Router
- 1 x User Manual
- 1 x Thank You Card
- 1 x RJ45 Ethernet Cable
- 4 x External Antennas (2 x Wi-Fi antennas, 2 x 4G LTE antennas)
- 1 x 12V/2.5A Power Adapter (1.8 meters)
- 1 x Wall Mount Kit
- 1 x Adhesive Pad
- 1 x Converter (based on your shipping country, e.g., US, EU, UK, or AU)
- Warranty Card (2-year limited warranty)


3. Setup Guide
3.1. Device Layout and Ports



3.2. LED Indicators
The router features several LED indicators to show its current status:
| Condition Status | Power | Internet | 2.4GHz | 5GHz | Cellular |
|---|---|---|---|---|---|
| Normal (connected to the internet) | Green | Green | Green | Green | Green |
| Not connected to the internet | Green | Off | Green | Green | Green |
| Updating firmware | Green | Blinking green (every 0.5s) | Blinking green (every 0.5s) | Blinking green (every 0.5s) | Green |
| Resetting router (hold down "reset" button for > 3s) | Blinking green (every 1s) | Green | Green | Green | Green |
| Restoring router to factory settings (hold down "reset" button for 10s) | Fast blinking green (every 0.25s) | Green | Green | Green | Green |
3.3. Initial Setup Steps
To set up your Spitz Plus, you will use one of the four supported internet connection methods: Cellular (SIM required), Ethernet, Repeater, and Tethering.
3.3.1. Power On
Connect the two-piece power adapter to the router and plug it into an outlet. The router will start up automatically.
3.3.2. Connect Device
Connect your device (e.g., computer, laptop, or smartphone) to the router using Wi-Fi or Ethernet.
- Ethernet: Connect your device to the router's LAN port using an Ethernet cable.
- Wi-Fi: On your device, go to Settings > WLAN, locate your router's Wi-Fi network name (SSID) in the list of available networks, and enter the password. The default network name and password are printed on your router's label.
3.3.3. Log in to Web Admin Panel
Launch a web browser, enter 192.168.8.1 in the address bar, and you will access the GL.iNet Web Admin Panel. Choose a language, set your admin password, and click Apply.
3.3.4. Internet Setup
Configure your Spitz Plus using one of the supported internet connection methods. If you want to use the Multi-WAN feature, you can set up more than one internet connection.
Before you start (if connecting via cellular method):
- Activate your SIM card(s) if required by the SIM card carrier.
- Power off your router.
- Insert the SIM card(s) into the SIM card slots. (Note: Only one SIM card is active at one time. The other SIM card functions only as a backup.)

If you have inserted the SIM card into your router, the internet should connect automatically. You should see the name of your SIM carrier and a green dot in the Cellular section of the Admin Panel.
Ethernet Connection:

Connect the Spitz Plus's WAN port to an upstream device (e.g., a modem) via an Ethernet cable. Once successfully connected, a green dot will appear in the Ethernet section on the INTERNET page.
Repeater Connection:

- On the INTERNET page of the admin panel, locate the Repeater section and click Connect.
- Select a Wi-Fi network from the available networks.
- Enter the password, then click Apply.
Tethering Connection:

- Connect your mobile device (e.g., smartphone or USB dongle) to the router's USB port using a USB cable.
- On your mobile device, go to Settings and enable USB Tethering.
- On the INTERNET screen of the web Admin Panel, click Connect in the Tethering section.
Once successfully connected to the internet, a green dot will appear in the respective section on the INTERNET page.
Official product video demonstrating the features and setup of the GL.iNet Spitz Plus router.
4. Operating Instructions
The Spitz Plus web Admin Panel provides comprehensive control over your router's functions.
4.1. Wireless Settings
The Wireless page allows you to configure both 5 GHz and 2.4 GHz Wi-Fi networks. Settings include enabling/disabling Wi-Fi, setting TX power, specifying the Wi-Fi name (SSID), enabling/disabling randomized BSSID, selecting Wi-Fi security mode, setting Wi-Fi password, configuring SSID visibility, choosing the Wi-Fi mode, bandwidth, and channel.
4.2. Client Management
The Clients page displays information about connected devices, including device name, connection type (Ethernet or Wi-Fi), IP and MAC addresses, download and upload speeds, total traffic. It also provides options to reserve IP addresses, block clients, or perform other actions.
4.3. Cloud Services
- GoodCloud: GL.iNet GoodCloud provides an easy way to remotely access and manage GL.iNet routers.
- AstroWarp: An advanced networking platform for seamless remote networking and device management, supporting comprehensive device management across entire networks. (Requires firmware v4.8 or above).
4.4. VPN (Virtual Private Network)
A VPN creates a secure, encrypted tunnel for your traffic, enhancing privacy and security. Spitz Plus supports OpenVPN and WireGuard protocols.


- OpenVPN: Supports OpenVPN client and server configurations.
- WireGuard: Supports WireGuard client and server configurations, offering great speeds and convenience.
4.5. Applications
- Plug-ins: Software components that add specific features or functionalities.
- Dynamic DNS (DDNS): Automatically detects and updates the IP address associated with a domain in real-time for remote network access.
- Network Storage: Centralized data storage solution for accessing and sharing files over a network.
- AdGuard Home: A third-party tool that blocks ads and tracking.
- Parental Control: Manages and controls children's devices, including screen time limits and content restrictions.
- Tailscale: A VPN service for accessing devices and applications anywhere. (Requires firmware v4.7 or above).
- eSIM: Spitz Plus supports eSIM functionality. (Requires firmware v4.7 or above).
4.6. Network Settings
- Port Forwarding: Allows remote servers and devices to access devices on a private network.
- Multi-WAN: Allows setting up multiple internet connections (cellular, repeater, Ethernet) simultaneously. If one connection fails, the router automatically switches to another.
- LAN: Configures Local Area Network settings for high-speed data transfer and resource sharing.
- DNS: Sets custom DNS servers, enables DNS rebinding attack protection, and configures DNS server settings.
- Port Management: Configures WAN and LAN ports, sets WAN/LAN interface to Ethernet, specifies MAC mode and address, and shows network port rate.
- Network Mode: Determines how a device connects to a network and communicates.
- IPv6: Internet Protocol version 6, providing a larger address space.
- Drop-in Gateway: Extends main router functionality with features like AdGuard Home, encrypted DNS, and VPN.
- IGMP Snooping: Network optimization technique for managing multicast traffic.
- Network Acceleration: Uses specialized hardware components for efficient task performance.
- NAT Settings: Enables or disables Full Cone NAT and SIP ALG functionality.
5. Maintenance
5.1. System Overview
The Overview page provides a snapshot of your router's current status and performance metrics:
- CPU Average Load: Monitors CPU load to assess performance and identify bottlenecks.
- Memory Usage: Checks memory usage for resource management.
- LED Control: Toggles router LED lights on or off.
- Flash Usage: Views flash storage utilization.
- Device Info: Accesses detailed system information (uptime, hostname, model, OpenWrt version, etc.).
- External Storage: Checks status of connected USB drives or TF cards.
5.2. Firmware Upgrade
The Upgrade page updates your router's firmware for enhanced performance, security, and new features. Two options are available:
- Firmware Online Upgrade: Automatically checks for and installs the latest firmware version.
- Firmware Local Upgrade: Manually uploads a firmware file from your computer.
- Module Online Upgrade: Automatically checks for and installs the latest 4G/5G module version.
- Module Local Upgrade: Manually uploads a module file from your computer.
5.3. Scheduled Tasks
Automate various router functions based on a predefined schedule:
- LED Display Schedule: Sets a schedule to automatically turn LED lights on or off.
- Schedule Reboot: Configures the router to reboot automatically at specified intervals.
- Wi-Fi Status Schedule: Controls 5GHz / 2.4GHz Wi-Fi band availability for network management and power consumption.
5.4. Time Zone
Sets the correct time zone for accurate timestamping of scheduled tasks, logs, and system events.
5.5. Logs
The Log page provides access to various logs for troubleshooting and performance monitoring:
- System Log: Detailed logs of system-level events.
- Kernel Log: Logs related to kernel operations.
- Crash Log: Records system crashes and errors.
- Cloud Log: Logs of interactions with GoodCloud services.
- Nginx Log: Logs from the Nginx web server (if used).
An Export Log button allows you to export all collected logs for technical support.
5.6. Reset Firmware
Resets the router's current firmware version to its default settings, erasing all custom configurations. This is useful for troubleshooting or starting fresh.
6. Troubleshooting
- Internet Connection Issues: If the internet does not connect automatically after inserting a SIM card, power off the router, re-insert the SIM card, and power it on again.
- Cellular Network Problems: Refer to the Cellular Network Troubleshooting Guide for detailed assistance.
- eSIM Functionality: Ensure your Spitz Plus firmware is v4.7 or above for eSIM functionality.
- AstroWarp Compatibility: AstroWarp requires firmware v4.8 or above.
- General Connectivity: Ensure all cables are securely connected and power is supplied correctly. Check LED indicators for status.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | GL.iNet |
| Type | Wireless |
| CPU | Qualcomm Dual-core, @1GHz |
| Memory | DDR3L 512MB |
| Storage | NAND Flash 128MB |
| Protocol | IEEE 802.11a/b/g/n/ac/ax |
| Wi-Fi Speed | 574Mbps (2.4GHz), 2402Mbps (5GHz) |
| Ethernet Speed | 10/100/1000Mbps |
| Antennas | 2 x Cellular Antennas (SMA, 600M~3.8GHz), 2 x Wi-Fi Antennas (PR-SMA, 2.4G~2.5GHz, 5.15~5.84GHz) |
| LEDs | Power / Internet / 2.4G Wi-Fi / 5G Wi-Fi / Cellular Signal Strength |
| Power Input | DC5521, 12V/2.5A (5.5*2.1mm) [default adapter] / 9V~36V |
| Power Consumption | <14W |
| Operating Temperature | 0 ~ 40°C (32 ~ 104°F) |
| Storage Temperature | -20 ~ 70°C (-4 ~ 158°F) |
| Dimension | 141 x 86 x 36mm |
| Weight | 443g |
| 5G Wi-Fi Transmission Rate | 2167Mbps |
| Wired Transfer Rate | 10/100/1000Mbps |
| Wi-Fi Transmission Standard | 802.11ac |
| 2.4G Wi-Fi Transmission Rate | 450 Mbps |
| Wi-Fi Supported Frequency | 2.4G & 5G |
| Supports WPS | No |
| Supports WDS | Yes |
| Number of USB Interfaces | 1 x USB 2.0 |
| WAN Ports | 1 x 10/100Mbps |
| LAN Ports | 2 |
| Function | Firewall, QoS, VPN |
| Application | Network Security |
| Standards And Protocols | Wi-Fi 802.11g, Wi-Fi 802.11b, Wi-Fi 802.11n, Wi-Fi 802.11ac |
| Wireless transmission rate | 1800M |
| Support Mesh | Not Supported |
| Frequency | 2.4 GHz |
| Antenna Type | Fixed |
| Recommended Uses | Business |
| Wireless Communication Standard | 802.11.ac |
| Frequency Band Class | Dual-Band |
| Max. LAN Data Rate | 1000Mbps |
| With Modem Function | No |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS, WEEE |

7.1. 4G LTE Frequency Bands
The Spitz Plus (GL-X2000) supports different frequency bands depending on the installed module:
| Module | Type | Bands | Regions |
|---|---|---|---|
| Quectel EG120K-NA | LTE-FDD | B2/ 4/ 5/ 7/ 12/ 13/ 14/ 25/ 26/ 29/ 30/ 66/ 71 | North America |
| LTE-TDD | B41/ 48 | ||
| UMTS (WCDMA) | - | ||
| Quectel EG120K-EA | LTE-FDD | B1/ 3/ 5/ 7/ 8/ 20/ 28/ 32 | EMEA/APAC/Brazil |
| LTE-TDD | B38/ 40/ 41 | ||
| UMTS (WCDMA) | B1/ 3/ 5/ 8 |
8. Warranty and Support
The GL.iNet Spitz Plus (GL-X2000) comes with a 2-year limited warranty. For technical support, please refer to the official GL.iNet documentation or contact customer service.
You can find additional guides and documents, including the user manual in PDF format, at the official GL.iNet website.
9. User Tips
- VPN Compatibility: The Spitz Plus supports various VPN services, including OpenVPN and WireGuard. If you use a specific VPN provider like SurfShark, ensure you configure the router as a client for that service.
- Global SIM Card Usage: The router's dual-SIM functionality and support for various LTE frequency bands (EG120K-NA for North America, EG120K-EA for EMEA/APAC/Brazil) make it suitable for international travel. Always check the specific bands supported by your SIM card and the region you are in.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features like eSIM and AstroWarp.
- Multi-WAN for Reliability: Utilize the Multi-WAN feature by setting up multiple internet connections (e.g., cellular and Ethernet) to ensure continuous internet access through automatic failover.