1. Introduction
The TOWILD BK20 is a high-performance, multifunctional tactical flashlight designed for various outdoor and emergency scenarios. It features a powerful LED, multiple lighting modes, and robust construction, making it a reliable tool for camping, hiking, duty patrol, and self-defense.
Key features include:
- Utilizes 1*CREE XHP70.3 LED with a lifespan of 50,000 hours.
- Powered by a 21700 rechargeable lithium-ion battery.
- Integrated charging and discharging technology, allowing it to function as a power bank.
- Tail tactical three-switch design for convenient and quick operation, including a one-key lock to prevent accidental activation.
- Constructed from aerospace-grade aluminum with a hard anodized anti-wear surface treatment.
- Equipped with a stainless steel attack head featuring three silicon nitride ceramic beads for emergency window breaking or defense.
2. Safety Information
- Battery Insulation: Before initial use or charging, rotate the flashlight body and remove the insulation sheet from the battery compartment. Failure to do so will prevent the flashlight from operating or charging.
- Charging Port Cover: Before charging, ensure the protective cover of the Type-C charging port is turned to the left to expose the port.
- Eye Safety: Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment or permanent damage.
- Heat: The flashlight may become warm during prolonged use, especially on higher brightness settings. Handle with care.
- Children: Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- TOWILD BK20 Tactical Flashlight
- 21700 5000mAh Lithium Battery (pre-installed, with insulation sheet)
- Type-C Charging Cable
- Discharge Conversion Head (for power bank function)
- Sealing Ring (spare)
- Bracelet (lanyard)
- User Manual


4. Setup
- Battery Installation: Unscrew the tail cap of the flashlight. Remove the pre-installed insulation sheet from the 21700 lithium battery. Insert the battery with the positive (+) end facing towards the lamp head. Screw the tail cap back on securely.
- Initial Charge: Before first use, it is recommended to fully charge the flashlight. Turn the protective cover of the Type-C charging port (located near the lamp head) to the left to expose the port. Connect the Type-C charging cable to the flashlight and a suitable USB power source (e.g., mobile power, computer, car charger). The battery indicator light will show charging status (see Section 7).
5. Operating Instructions
The BK20 features a tail tactical three-switch design for intuitive control:

- Button A (Tactical Switch): Power on/off.
- Button B (Function Button): Cycles through brightness gears and activates strobe/SOS modes.
- Button C (Mode Switch): Switches between Duty, Daily, and Tactical modes.
Power On/Off
- Press Button A to turn the flashlight on or off.
Mode Switching (Button C)
After pressing Button A to power on:
- Press and hold Button C for 3 seconds to enter the mode switch.
- Press Button C repeatedly to cycle through modes: Slow Flashing (Duty Mode) → Medium Flashing (Daily Mode) → Fast Flashing (Tactical Mode).
- Press Button A to turn off the device, which also locks the selected mode.
Brightness Adjustment (Button B)
After pressing Button A to power on:
- Click Button B again to cycle through the brightness gears within the selected mode.
- The flashlight has a memory function for Daily and Tactical modes, recalling the last used brightness setting.
Strobe Function (Button B)

- From OFF state: Press Button B to enter instantaneous strobe mode. Release Button B to turn off.
- From ON state: Press Button B to enter instantaneous strobe mode. Release Button B to return to the original brightness gear.
- Lock Strobe Mode: Press and hold Button B for more than 3 seconds to lock the strobe mode (both from ON or OFF state).
SOS Mode
- After pressing Button A to turn on the device, double-click Button B to enter SOS mode.
- Double-click Button B again to return to the original position (previous brightness setting).
6. Modes and Brightness Levels
The BK20 offers various modes and brightness levels to suit different needs:
| Mode | Output | Runtime | Distance |
|---|---|---|---|
| General Mode | Turbo (5100 Lumens) | 2h | 450m (Max) |
| High (2250 Lumens) | 3h 30min | ||
| Mid (400 Lumens) | 8h | ||
| Low (100 Lumens) | 30h | ||
| Eco (5 Lumens) | 240h | ||
| Daily Mode | High (2250 Lumens) | 3h 30min | |
| Low (100 Lumens) | 30h | ||
| Tactical Mode | Strobe (5100 Lumens) | 2h | |
| Strobe (3000 Lumens) | N/A | ||
| SOS Mode (2000 Lumens) | N/A |


7. Charging and Power Bank Function
Charging the Flashlight
The BK20 features integrated Type-C charging. To charge:
- Ensure the battery insulation sheet has been removed (see Section 4).
- Turn the protective cover of the Type-C charging port to the left to expose the port.
- Connect the provided Type-C charging cable to the flashlight and a USB power source.
- The battery indicator light will show the charging status. A green light indicates a full charge.
Power Bank Function
The BK20 can be used as a power bank to charge other electronic devices.
- Connect the provided Discharge Conversion Head to the Type-C port of the flashlight.
- Connect your electronic device (e.g., smartphone) to the conversion head using its appropriate charging cable.
- The flashlight will begin charging your device.


8. Battery Level Indicator
The red and green indicator light provides a quick overview of the battery status. The status is automatically displayed when the flashlight is turned on, and can also be checked by clicking the function switch (Button B) in lock mode.
- Green light always on: Battery level > 91%
- Green light flashing: Battery level 41%-90%
- Red light always on: Battery level 11%-40%
- Red light flashing: Battery level < 10%

9. Maintenance
- Cleaning: Clean the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Threads and O-rings: Periodically lubricate the threads and O-rings with silicone grease to maintain waterproof integrity and smooth operation. Replace O-rings if they appear damaged or worn.
- Battery Care: Store the battery in a cool, dry place. If storing for extended periods, charge the battery to approximately 50% every few months to prolong its lifespan.
- Charging Port: Keep the Type-C charging port clean and free of debris. Ensure the protective cover is securely closed when not charging to prevent water and dust ingress.
10. Troubleshooting
- Flashlight not turning on:
- Check if the battery insulation sheet has been removed.
- Ensure the battery is correctly inserted with the positive (+) end towards the lamp head.
- Verify the battery is charged (check indicator light).
- Tighten the tail cap securely.
- Flashlight not charging:
- Ensure the protective cover of the Type-C port is fully open.
- Check if the charging cable is securely connected to both the flashlight and the power source.
- Try a different Type-C cable or power source.
- Confirm the battery insulation sheet has been removed.
- Mode switching issues:
- Refer to Section 5 for correct button press sequences for mode and brightness changes.
- Ensure the flashlight is not in lock mode (press Button A to turn off if in lock mode).
11. Specifications
| Feature | Specification |
|---|---|
| LED | 1*CREE XHP70.3 LED |
| Max Output | 5100 Lumens |
| Max Throw Distance | 450 meters |
| Max Runtime | 240 hours (Eco mode) |
| Battery Type | 21700 5000mAh Lithium-ion (rechargeable) |
| Charging Port | Type-C (integrated charging/discharging) |
| Waterproof Rating | IPX8 |
| Impact Resistance | 1.5 meters |
| Material | Aerospace-grade Aluminum |
| Dimensions (L x D x Head D) | 150 mm x 29.2 mm x 41 mm |
| Net Weight | 235 g (without battery) |
| Operating Temperature | -35°C to 40°C |



12. User Tips
- Versatile Carrying: The flashlight includes a stainless steel two-way clip, allowing for comfortable and versatile carrying options, such as attaching it to a pocket, belt, or backpack strap. This can be a convenient alternative if a holster is not available.
- Emergency Use: The ceramic bead attack head is designed for emergency situations like breaking windows. Practice safe handling when using this feature.
- Power Bank Function: Remember to carry the discharge conversion head if you plan to use the flashlight to charge other devices on the go.
13. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official TOWILD website. Keep your purchase receipt as proof of purchase.
14. Product Demonstration Video
Watch this video for a visual guide on the TOWILD BK20 Tactical Flashlight's features and capabilities, including brightness levels, strobe function, durability tests, and portability.