1. Introduction
This manual provides comprehensive instructions for the installation and operation of your new CarPlay & Android Auto module. This module integrates Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system, offering enhanced navigation, communication, and entertainment features.
For a visual overview of the product and its features, please watch the following video:
Video: Product demonstration and installation overview.
2. Compatibility
This module is designed for specific Jeep and Dodge vehicles equipped with the OEM HARMAN unit. Please verify your vehicle's compatibility before installation.
2.1 Compatible Models
| MODEL | SYSTEM | YEAR |
|---|---|---|
| Grand Cherokee | HARMAN | 2014-2017 |
| Cherokee | HARMAN | 2014-2017 |
| Charger | HARMAN | 2015-2017 |
| Challenger | HARMAN | 2015-2017 |
| Durang | HARMAN | 2014-2017 |
| RAM | HARMAN | 2013-2018 |
| Chrysler 300C | HARMAN | 2015-2016 |
2.2 Important Compatibility Check
Before purchasing or installing, ensure your car's infotainment system has a 'Phone' icon on the main screen. This is crucial for compatibility.
Image: Compatible Model List and visual guide for checking the 'Phone' icon on your car's screen.
3. Product Contents
The package includes the following items:
Image: All accessories included in the product package.
- Wireless CarPlay Module
- Power/Canbus Cable
- Video Board
- Video Cable
- USB Cable
- Metal Bracket
- Silicone Pad
- Screws
- Installation Manual (this document and a PDF version)
A detailed user manual in PDF format is also available. You can view it here.
4. Installation Instructions
The installation process involves disassembling parts of your car's infotainment system. If you are not comfortable performing these steps, it is recommended to seek professional assistance.
4.1 Screen Removal
You can find a video guide for screen removal on YouTube by searching for the provided link in the PDF manual. The general steps are:
- Carefully remove the screen bezel.
- Unscrew the 4 screws holding the screen in place.
- Unplug all connectors from the back of the screen.
Image: Exploded view illustrating the screen removal and module integration process.
4.2 Screen Motherboard Installation
This section details the steps for installing the module's video board onto your car's screen motherboard. A video guide for this process is available on YouTube (link provided in the PDF manual).
- **Remove Metal Back Cover:** Remove the 4 screws (two on each side) from the screen's metal back cover, then carefully remove the cover.
- **Remove Original Green PCBA:** Carefully remove the original green Printed Circuit Board Assembly (PCBA) from the screen unit.
- **Place Silicone Pad:** Place the included silicone pad on the raised area within the screen unit.
- **Install Metal Bracket:** Install the provided metal bracket over the silicone pad.
- **Insert Video Cable Connector:** Insert the video cable connector into the add video board. Important: The raised (wavy) side of the connector must face upward.
- **Insert Added Video Board:** Insert the added video board into the original socket from top to bottom.
- **Secure Video Board and Cable:** Gently press the video board down to ensure better contact. Route the added video cable out through the gap at the corner of the unit.
- **Insert Original PCBA:** Insert the original PCBA into the added video board from top to bottom.
- **Reattach Metal Cover:** Keep the video cable routed through the corner gap. Reattach the metal cover using the 4 added screws.
Image: Top view of the screen unit, highlighting the screws to remove the metal back cover.
Image: Side view of the screen unit, showing the metal back cover and screw locations.
Image: The original green PCBA after removal from the screen unit.
Image: Placement of the silicone pad and installation of the metal bracket within the screen unit.
Image: Close-up of the video cable connector insertion, emphasizing the correct upward orientation of the wavy side.
Image: The added video board being carefully inserted into the original socket.
Image: The original PCBA being re-inserted, connecting to the newly added video board.
4.3 ACC Wire Connection Diagram
The red "ACC" wire typically does not need to be connected for normal operation. However, if your original display functions correctly but does not switch to CarPlay, you will need to connect the ACC wire.
- **When to connect:** If the original display works but doesn't switch to CarPlay.
- **How to connect:** Extend the red "ACC" wire and connect it to any vehicle ACC 12V source (e.g., a fuse panel).
Image: Wiring diagram illustrating the connection of the red ACC wire to the vehicle's ACC circuit.
5. Setup & Configuration
5.1 Dial Switch Settings
The module features a dial switch for screen type configuration. The factory default (Screen Type 1) works for approximately 95% of vehicles. Use Screen Type 2 ONLY if you experience issues such as a zoomed-in/out CarPlay display or touch screen dead zones.
Image: Diagram showing the dial switch settings for Screen Type 1 (factory default) and Screen Type 2.
- **Screen Type 1 (Factory Default):** ON ON OFF OFF ON OFF ON OFF
- **Screen Type 2:** ON ON OFF ON ON OFF ON OFF
After changing the switch settings, unplug the white power connector for the settings to take effect.
5.2 Entering the Added System Menu
To access the module's system menu:
- **Recommended:** Hold the small button on the USB cable for 2 seconds.
- **Alternative:** Quickly double-press the hazard lights button.
Image: Location of the small button on the USB cable and the hazard lights button for menu access.
5.3 Pairing CarPlay/Android Auto (Bluetooth)
Follow these steps for initial pairing:
- Enter the added system menu (as described above).
- Tap the "Bluetooth" icon to view the device's Bluetooth name (e.g., "Car Audio XXXX").
- Pair your phone's Bluetooth with the module's Bluetooth.
- Accept all permission prompts on your phone.
- The CarPlay/Android Auto interface should load automatically.
Technical Details:
- Bluetooth is only used for initial pairing; it will disconnect automatically after setup. This is normal.
- CarPlay and Android Auto operate via Wi-Fi. Ensure your phone's Wi-Fi is ON during use.
- Turning off Wi-Fi will immediately disconnect CarPlay/Android Auto.
5.4 Getting CarPlay/Android Auto Media Sound
To ensure audio plays through your vehicle's speakers:
- Pair your phone's Bluetooth (which disconnected after initial setup) to your vehicle's factory Bluetooth.
- In your car's radio settings, set the audio source to "Bluetooth/BT".
CarPlay/Android Auto audio will now play through your vehicle speakers via Bluetooth.
Technical Details:
- Setting the car audio source to "Bluetooth" is mandatory.
- **iPhone:** Check that the Bluetooth device type is set to "Car Stereo".
- **Android:** Enable both "Call Audio" and "Media Audio" switches for the Bluetooth connection.
6. Operating Instructions
Once installed and configured, the module allows seamless integration of CarPlay and Android Auto.
6.1 Wireless CarPlay and Android Auto
Enjoy wireless access to your smartphone's features directly on your car's screen. This includes navigation, music, calls, and messages.
Image: Examples of the Wireless CarPlay and Android Auto interfaces displayed on the car's screen.
6.2 Audio and Microphone Usage
The module utilizes your car's factory microphone for calls and voice commands, eliminating the need for an external microphone. Audio is routed through the factory Bluetooth system for superior sound quality compared to AUX connections.
Image: Visual representation of using the car's factory microphone for calls and factory Bluetooth for audio playback.
6.3 Music Playback
Access your favorite music apps like Apple Music, Spotify, YouTube Music, Tidal, and Amazon Music directly through the CarPlay/Android Auto interface.
Image: CarPlay interface displaying various music streaming applications.
6.4 Retaining OEM Screen Functionality
The module integrates with your existing OEM screen without replacing it. You can easily switch between the original car system and the CarPlay/Android Auto interface by pressing the designated button (often the 'Screen Off' or similar button, as indicated in the installation video).
Image: Comparison of the OEM car interface and the CarPlay interface, demonstrating the seamless switching.
7. Troubleshooting
7.1 Display Issues (Washed Out Screen)
Due to the car's low-resolution screen, the CarPlay/Android Auto display might appear washed out in 'Day Mode'. It is highly recommended to use 'Night Mode' for optimal clarity.
Image: Comparison of Day Mode and Night Mode display, with steps to enable 'Always Dark Mode' for better visibility.
How to Set Night Mode:
- Enter the CarPlay screen.
- Tap "Settings" - Appearance.
- Select "Always Dark Mode."
7.2 CarPlay/Android Auto Not Switching
If your original display works normally but does not switch to the CarPlay/Android Auto interface, refer to section 4.3 regarding the ACC wire connection. Connecting the red "ACC" wire to a vehicle ACC 12V source should resolve this.
7.3 Bluetooth Disconnection After Pairing
It is normal for Bluetooth to disconnect automatically after the initial pairing process. CarPlay and Android Auto primarily use Wi-Fi for data transfer. Ensure your phone's Wi-Fi is active for continuous functionality.
7.4 Display Zoomed In/Out or Touch Screen Dead Zones
If you experience these issues, adjust the dial switch settings to Screen Type 2 as described in section 5.1. Remember to unplug the white power connector after changing the switch for settings to apply.
8. User Tips
- **Pre-purchase Check:** Always send a picture of your car's screen to the seller before purchasing to confirm compatibility with your specific vehicle model.
- **Installation Video:** If you're unsure about the installation steps, refer to the installation video linked in the PDF manual for a visual guide.
- **Functionality Limitations:** This device does NOT support the Mirror function or Google Voice Assistant within Android Auto. Please consider this before installation if these features are critical for you.
- **USB Connection:** The module primarily uses wireless connectivity for CarPlay/Android Auto. The USB port is mainly for future upgrades and initial setup, not for continuous wired connection for core functions.
- **Night Mode for Clarity:** For the best visual experience, especially on older car screens, always enable 'Always Dark Mode' in CarPlay settings.
9. Specifications
- **Connectivity:** Wireless CarPlay, Wireless Android Auto
- **Bluetooth:** Bluetooth 5.0 (for initial pairing and audio routing)
- **Wi-Fi:** 5GHz and 2.4GHz (for CarPlay/Android Auto data transfer)
- **Compatibility:** Jeep/Dodge vehicles with OEM HARMAN unit (2013-2018, see compatibility list)
- **Control:** Supports original knob and steering wheel controls
- **Audio Output:** Utilizes original Bluetooth audio (not AUX)
- **Microphone:** Uses car's factory microphone
- **Camera Support:** Supports factory reverse camera and aftermarket reverse camera
- **Installation:** Plug and play, no program coding required
10. Warranty & Support
For any technical support or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.