Introduction
Thank you for choosing the V30 Bone Conduction Headphones. These innovative headphones are designed to provide high-quality audio through bone conduction technology, allowing you to enjoy music while remaining aware of your surroundings. Featuring Bluetooth 5.3 for stable connectivity, IPX5 waterproofing for active lifestyles, and a comfortable open-ear design, the V30 is perfect for sports and daily use. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Key Features
- Bone Conduction Technology: Delivers audio through your cheekbones, keeping your ears open to ambient sounds. Reduced sound leakage by up to 50% with a fully enclosed cavity.
- Open-Ear Design: Lightweight and comfortable for all-day wear, reducing ear burden.
- Bluetooth 5.3: Ensures stable, fast, and low-latency wireless connection up to 10 meters (33 feet).
- IPX5 Waterproof Rating: Resistant to splashes and sweat, suitable for various sports activities.
- Ultra-Long Battery Life: Up to 88 hours of music playback and 108 hours of talk time on a single charge.
- Built-in Memory Card Slot: Supports TF cards for independent music playback without a connected device.
- Type-C Fast Charging: Fully charges in approximately 2 hours.
- Intelligent Noise Reduction: CVC algorithm and Qualcomm chips for clearer communication.
- Durable Design: Features 360° arbitrary bending and tested for 10,000 bends.
Setup Guide
1. Charging Your Headphones
Before first use, fully charge your V30 headphones.
- Locate the Type-C charging port on the headphones.
- Connect the provided Type-C charging cable to the port and the other end to a USB power adapter (not included) or a computer's USB port.
- The LED digital display will indicate charging status. A full charge takes approximately 2 hours.
2. Powering On/Off
- To Power On: Press and hold the power button (usually the multi-function button) for a few seconds until the LED indicator lights up and you hear a power-on prompt.
- To Power Off: Press and hold the power button again for a few seconds until the LED indicator turns off and you hear a power-off prompt.
3. Bluetooth Pairing
Pair your V30 headphones with your Bluetooth-enabled device.
- Ensure the headphones are powered off.
- Press and hold the power button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn Bluetooth on.
- Search for available devices and select "V30" from the list.
- Once connected, the LED indicator will flash blue slowly, and you will hear a connection confirmation.
4. Using the Memory Card (TF Card)
The V30 headphones support independent music playback via a TF (MicroSD) card.
- Ensure the headphones are powered off.
- Locate the memory card slot on the headphones.
- Gently insert a TF card (up to 32GB, not included) into the slot until it clicks into place.
- Power on the headphones. They will automatically switch to memory card playback mode if a card is detected.
Operating Instructions
Control Buttons
The V30 headphones feature intuitive controls for easy management of music and calls.
| Function | Action |
|---|---|
| Power On/Off | Press and hold the multi-function button. |
| Play/Pause Music | Short press the multi-function button. |
| Volume Up | Short press the '+' button. |
| Volume Down | Short press the '-' button. |
| Next Track | Long press the '+' button. |
| Previous Track | Long press the '-' button. |
| Answer/End Call | Short press the multi-function button. |
| Reject Call | Long press the multi-function button. |
| Activate Voice Assistant (Siri/Android) | Double-press the multi-function button. |
Maintenance and Care
- Cleaning: Use a soft, damp cloth to wipe the headphones. The liquid silicone ear hooks are skin-friendly and easy to clean. Avoid using harsh chemicals or abrasive materials.
- Water Resistance: The V30 headphones are IPX5 waterproof, meaning they are resistant to splashes and sweat. Do not submerge them in water or expose them to strong jets of water. Ensure the charging port cover is securely closed when exposed to moisture.
- Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in use for extended periods.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Cannot power on | Ensure the headphones are charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth / Bluetooth disconnects |
|
| Memory card songs not playing / Cannot detect memory card |
|
| No sound or low volume |
|
Specifications
| Feature | Detail |
|---|---|
| Model | V30 |
| Connectivity | Bluetooth 5.3 |
| Wireless Range | Up to 10 meters (33 feet) |
| Waterproof Rating | IPX5 |
| Battery Life (Music) | Up to 88 hours |
| Battery Life (Talk Time) | Up to 108 hours |
| Charging Time | Approx. 2 hours |
| Charging Interface | Type-C |
| Memory Card Support | TF Card (up to 32GB) |
| Microphone | Built-in, with intelligent noise reduction (CVC algorithm) |
| Chipset | Qualcomm (for stable connection and noise reduction) |
| Design | Bone Conduction, Open-Ear, Ear-hanging |
| Durability | 360° arbitrary bending, 10,000x bending test |
User Tips
- For Swimming: When using the headphones for swimming, it is highly recommended to use the built-in memory card for music playback. Bluetooth signals are significantly weakened underwater, making direct streaming unreliable.
- Secure Fit: The ear-hanging design provides stability during physical activities. Ensure the headphones are securely placed to prevent them from falling off, especially during vigorous exercise.
- Awareness: The open-ear design is great for outdoor activities as it allows you to hear your surroundings, enhancing safety.
Warranty and Support
For any warranty claims, technical support, or product-related inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
