KINGBOLEN Soloscan Bi-Directional Scanner Instruction Manual

Introduction

The KINGBOLEN Soloscan is an innovative, pocket-sized diagnostic tool designed to transform your smartphone into an intelligent car scanning and diagnostic device. It integrates multiple functions, connecting to your vehicle's OBD port and performing diagnostic scans through the EDIAG App to accurately locate vehicle faults and assist with maintenance. This manual provides detailed instructions for setting up, operating, and maintaining your Soloscan device.

Image: KINGBOLEN Soloscan Diagnostic Tool with carrying case, highlighting its features.

Setup Guide

Follow these steps to set up your KINGBOLEN Soloscan device:

1. Download the EDIAG App: Search for "EDIAG" in the App Store (iOS) or Google Play Store (Android) and install it on your smartphone.
2. Register & Log In: Open the EDIAG App and follow the on-screen instructions to register a new account or log in if you already have one.
3. Activate the Device: When prompted, enter the Serial Number and 8-digit Activation Code found on your device or in the Quick Start Manual.
4. Connect to Vehicle: Locate your vehicle's OBD-II port (usually under the dashboard) and plug in the Soloscan device.
5. Turn on Ignition: Turn your vehicle's ignition to the "ON" position (engine off).
6. Bluetooth Connection: In the EDIAG App, search for the Soloscan device via Bluetooth and connect. Ensure Bluetooth is enabled on your smartphone.
7. Update Software: After successful connection, check for and install any available software updates for optimal performance and the latest vehicle coverage.

Image: Visual guide for the 6-step quick setup process, including app download, registration, activation, plugging in, turning on ignition, and Bluetooth connection.

Operating Instructions

Full System Diagnostics

The Soloscan provides comprehensive diagnostics for all major vehicle systems, including:

• ABS System
• Engine System
• SAS (Steering Angle Sensor) System
• TPMS (Tire Pressure Monitoring System)
• IMMO (Immobilizer) System
• Battery System
• Oil Service System
• SRS (Supplemental Restraint System)
• DPF (Diesel Particulate Filter) System
• Air Conditioning System
• Transmission System
• And many more...

Key diagnostic functions include:

• Read Fault Codes: Decodes Diagnostic Trouble Codes (DTCs) to pinpoint fault locations.
• Clear Fault Codes: Erases DTCs and turns off the Malfunction Indicator Lamp (MIL) after repairs.
• Retrieve ECU Information: Accesses vehicle information such as VIN, Calibration Mark (CALID), and Calibration Verification Number (CVN).
• Graph Live Data Stream: Displays dynamic data streams in real-time, often in graphical (waveform) format, to assess vehicle condition. The 4-in-1 live data stream allows for combined viewing of multiple parameters for comparison.
• Freeze Frame: Records vehicle operating conditions at the moment a fault occurs, aiding in fault confirmation.

Image: Diagram illustrating in-depth all systems diagnosis, including SRS, SAS, Engine, ABS, BMS, TPMS, and BCM.

Image: Screenshot of the EDIAG app showing 4-in-1 live data stream and a vehicle health report, demonstrating real-time monitoring capabilities.

ECU Coding (Online & Offline)

The ECU Coding function allows for advanced vehicle module management:

• Online Coding: Accesses online vehicle repair data for high-level repairs and software updates.
• Offline Coding: Reads codes from an original module and writes them to a new module, such as writing a VIN to a new ECU.
• Component Matching: Performs matching, relearning, calibration, or initialization of adaptive data for components after repair or replacement (e.g., suspension calibration, seat matching, sunroof initialization, gearbox matching, injector calibration, transmission adaptation).
• Retrofit/Modification: Enables modifications like retrofitting a battery of a different type or upgrading lights to LED.
• Unlock Hidden Features: Activates or deactivates certain vehicle functions (e.g., disable auto start-stop, disable daytime running lights, disable seatbelt chime, set speed limits).

Note: ECU Coding functionality is available only for VW, Audi, Benz, and BMW vehicles.

Image: Graphic illustrating advanced ECU coding capabilities, including refreshing hidden functions, enhancing performance, matching components, and disabling auto start-stop or warning sounds.

Bi-Directional Control (Active Test)

The Bi-Directional Control feature allows the Soloscan to send commands to the vehicle's ECU to actuate specific components and test their integrity. This helps in quickly identifying faulty parts by observing their operation. Examples include:

• Wiper Test
• Clutch On/Off
• Headlamps On/Off
• Windows & Doors operation
• Sunroof Setting
• Engine Status Monitor
• And more...

Note: Active tests are not universal for all vehicles. Compatibility varies by manufacturer, year, and model. Always check compatibility with your VIN before performing active tests.

Image: Diagram showing bi-directional control (active test) with examples like wiper test, clutch on/off, headlamps on/off, windows & doors, sunroof setting, and engine status monitor.

Special Reset Functions

The Soloscan offers over 31 special reset and maintenance functions. These functions are integrated within the related system diagnostics in the EDIAG App, not under a separate "RESET" menu. To access them, navigate through "Diagnose > Automatically Search > System Selection > [Specific Control Module] > Special Functions".

Some of the available reset functions include:

• EPB Reset: Resets electronic parking brake pads after replacement.
• Oil Lamp Reset: Resets oil service light, mileage, and service interval.
• SAS Reset: Calibrates steering angle sensor.
• BMS Reset: Re-matches battery after replacement for proper power management.
• ABS Brake Bleeding: Facilitates bleeding of the ABS brake system.
• SUS Reset: Levels body height sensor in air suspension systems.
• TPMS Reset: Resets tire pressure monitoring sensors.
• GEAR Reset: Performs gear signal learning after crankshaft position sensor replacement.
• Injector Reset: Codes new injectors into the ECU.
• AFS Reset: Adjusts adaptive frontlighting system.
• Intelligent Cruise Control
• Engine Power Balance Monitoring
• Motor Angle Calibration
• Head Light Fitting
• Seat Matching/Calibration
• Door and Window Initialization Study/Calibration
• Sunroof Initialization
• Air Suspension Matching
• Gearbox Matching
• Injector Calibration
• Multimedia Video Reset
• Cluster Reset
• Tire Change Reset
• Fuel/Air Reset
• Coolant Bleed
• NOx Sensor Reset
• Stop/Start Reset
• Transport Mode
• Adblue Reset
• A/F (Air/Fuel Ratio) Adjustment
• A/C Relearn

Note: The availability of these functions varies depending on the specific car model and year. Always check compatibility first.

Image: Overview of various special reset services like Oil Reset, SAS Calibration, ABS Bleeding, BMS Reset, Brake Reset, D.P.F Regeneration, ETS Reset, and TPMS Reset.

Full OBD2 Functions

The Soloscan supports all 10 modes of OBD2 testing for vehicles manufactured after 1996:

1. Reading Codes: Displays detailed Diagnostic Trouble Codes (DTCs).
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, including graphical plotting.
4. I/M Readiness Status: Checks if emission-related systems are operating correctly.
5. Read Live Data Stream: Shows continuous data stream from the vehicle in real-time.
6. View Freeze Frame Data: Displays vehicle conditions recorded when an emission-related fault occurs.
7. O2 Sensor Test: Retrieves and views O2 sensor monitor test results.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components.
9. Read Vehicle Information: Displays VIN, CID, and CVN.
10. Component Test: Actuates certain vehicle components via commands from the scanner to test operability.

Image: Interface showing full OBDII functions like Read/Clear Codes, DTC Look Up, Live Data Stream, VIN Information, I/M Readiness, Freeze Frame, On-Board Monitor Test, EVAP Test, and O2 Sensor Test.

Maintenance

To ensure your Soloscan device remains up-to-date and performs optimally:

• Lifetime Free Updates: The device supports lifetime free software updates via Wi-Fi, ensuring you always have access to the latest vehicle models and features.
• Health Report Management: The EDIAG App allows you to generate, share, and print diagnostic health reports before and after service. This is useful for tracking vehicle health over time or sharing with customers/mechanics.

Troubleshooting

If you encounter any issues during operation, the Soloscan provides tools to help:

• Diagnostic Feedback: Use the "Diagnostic Feedback" function within the EDIAG App to submit details about your problem.
• Contact Support: If further assistance is needed, click "Contact Us" directly in the app or send your operation log and device Serial Number to support@kingbolen.com.

Image: Screenshots showing options for "Diagnostic Feedback" and "Contact Us" within the EDIAG app, along with an email address for support.

Specifications

Warranty and Support

KINGBOLEN provides the following support for your Soloscan device:

• 1-Year Warranty: Enjoy a 1-year warranty for any quality-related issues.
• Lifetime Free Technical Support: Access professional technical support for the lifetime of your product.

Image: Illustration of professional technical support available for KINGBOLEN products.

User Tips

• The Soloscan is specifically designed for single-car use and offers more maintenance and reset functions compared to the Ediag Elite, making it ideal for DIY enthusiasts.
• Always verify vehicle compatibility with your VIN before attempting active tests or special functions, as these features are not universal across all vehicles.
• ECU Coding functionality is limited to VW, Audi, Benz, and BMW vehicles.
• The KINGBOLEN Soloscan is optimized for Mercedes-Benz (MB Sprinter and Maybach). For other car brands, it primarily supports AutoVIN and Full OBD2 Functions.
• An active internet connection is required for the OBD scanner to operate.
• For optimal performance, use the "EDIAG" app on iOS or Android smartphones. Tablet and laptop usage is not recommended.