DEKO DKPCCSD150C1

Contents

DEKO DKPCCSD150C1 Electric Circular Saw User Manual

Model: DKPCCSD150C1

Brand: DEKO

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and care of your DEKO DKPCCSD150C1 Electric Circular Saw. Please read all instructions carefully before using the product and keep this manual for future reference.

DEKO DKPCCSD150C1 Electric Circular Saw
DEKO DKPCCSD150C1 Electric Circular Saw

Safety Information

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work Area Safety

  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical Safety

  • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
  • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
  • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal Safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
  • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
  • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
  • Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4) Power Tool Use and Care

  • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
  • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
  • Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
  • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
  • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Safety Precautions for Circular Saw

DANGER! Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the saw, they can not be cut by the blade. Keep your body positioned to either side of the saw blade, but not in line with the saw blade. Kickback could cause the saw to jump backwards. (See Kickback.)

  • Do not reach underneath the work. The guard can not protect you from the blade below the work.
  • Lower guard for proper closing before each use. Do not operate saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. With the power to the saw disconnected, raise the lower guard with the Retracting Handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.
  • Check the operation and condition of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a buildup of debris.
  • Lower guard should be retracted manually only for special cuts such as "Pocket Cuts" and "Compound Cuts". Raise lower guard by Retracting Handle. As soon as blade enters the material, lower guard must be released. For all other sawing, the lower guard should operate automatically.
  • Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.
  • NEVER hold piece being cut in your hands or across your leg. It is important to support the work properly to minimize body exposure, blade binding, or loss of control. Use vises, clamps, or other appropriate supports to securely hold the workpiece.
  • When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the chance for blade binding.
  • Always use blades with correct size and shape (diamond vs. round) arbor holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.
  • Never use damaged or incorrect blade washers or bolts. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.
  • Always wear approved safety impact eye goggles and heavy work gloves when using the Circular Saw. Using personal safety devices reduce the risk for injury.

Causes and Operator Prevention of Kickback:

Kickback is a sudden reaction to a pinched, bound, or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator. If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator. Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below:

  • Maintain a firm grip on the saw and position your body and arm in a way that allows you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken.
  • When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur. Investigate and take corrective actions to eliminate the cause of blade binding.
  • When restarting a saw in the workpiece, center the saw blade in the kerf and check that teeth are not engaged into the material. If saw blade is binding, it may walk up or kickback from the workpiece as the saw is restarted.
  • Support large panels to minimize the risk of blade pinching and kickback. Large panels tend to sag under their own weight. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel.
  • Do not use dull or damaged blade. Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding, and kickback.
  • Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade adjustment shifts while cutting, it will cause binding and kickback.
  • Use extra caution when sawing into existing walls or other blind areas. The protruding blade may cut objects that can cause kickback.

Lower Guard Function

  • Check lower guard for proper closing before each use. Do not operate saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.
  • Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris.
  • The lower guard may be retracted manually only for special cuts such as "plunge cuts" and "compound cuts." Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. For all other sawing, the lower guard should operate automatically.
  • Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.

Additional Safety Instructions for Circular Saw Blades

Safe Working Practice

  • Maximum speed: The maximum speed marked on the tool shall not be exceeded. Where stated, the speed range shall be adhered to.

Circular Saw Blades

  • Circular saw blades, the bodies of which are cracked, shall be scrapped (repairing is not permitted).
  • Composite (tipped) circular saw blades, where the tip dimension is reduced to less than 1 mm, shall be taken out of service.

Symbol Explanation

In this manual and/or on the machine the following symbols are used:

Symbol DescriptionMeaning
Warning triangle with exclamation markDenotes risk of personal injury or damage to the tool.
Book symbolRead instruction manual before use.
CE markConforms to relevant legislation and safety standards.
Crossed-out wheeled bin symbolDo not dispose of power tools and batteries/rechargeable batteries into household waste! Dispose the products according to the regulation and requirement of local council.
Double square symbolDouble insulation. Class II device. The device must not be earthed.
Ear protection, eye protection, and breathing protection symbolsWear hearing protection. Wear eye protection. Wear breathing protection.

Note: The symbols described above are typically found in the instruction manual (PDF).

Product Description

The DEKO DKPCCSD150C1 Circular Saw is a powerful and functional tool designed for various cutting tasks. It features a 1500W motor, 4800 RPM no-load speed, and a 185mm blade diameter. The saw is equipped with multi-function angle adjustment, a laser guide, and a scale ruler for precise and efficient cutting.

DEKO DKPCCSD150C1 Circular Saw features
Key features of the DEKO DKPCCSD150C1 Circular Saw.

Key Features:

  • Large Cutting Capacity: The 1500W powerful rated input motor rotates at 4,800 RPM, which provides power and speed to the most demanding cuts. Ultra-precise cutting delivers a splinter-free mirror finish. Ideal for cutting PVC tube, wood, bamboo, plywood, MDF, etc.
  • Adjustable Depth & Angles: Max cutting depth at 90° is 65mm and bevel capacity at 45° is 41mm. Perfect for miter cuts, bevels, framing and edging. Angle guide and quick adjustment which locks for peace of mind gives you a huge degree of versatility in your cuts.
  • Safe and Reliable Configuration: Safety lock release button ensures safe start of the machine; Dust extraction outlet keeps line-of-cut free of sawdust for improved visibility. Rubber overmold makes it easy for you to grip and control this tool, even in slippery conditions; Built-in current limiter helps prevent motor burnout and oversized vents help fast cooling.
  • Ergonomic Design: The handle part is coated with soft rubber, maximizes hand comfort and effectively reduces fatigue.

Included Items

DEKO DKPCCSD150C1 Circular Saw and included accessories
The circular saw and its included accessories.

The package includes:

  • (1) DKPCCSD150C1 Circular Saw
  • (1) Saw Blade
  • (1) Guide Ruler
  • (1) Hex Key
  • (1) Spanner
  • (1) Dust-Blowing Port Adapter
  • (1) Manual

Components Overview

For a detailed view of the saw's components, please refer to the diagram in the full instruction manual (PDF). Key parts include:

  1. Handle
  2. On/off switch
  3. Lock-off button
  4. Cutting depth lock lever
  5. Power cable
  6. Base plate
  7. Lock knob for bevel scale
  8. Lock knob for parallel guide
  9. Bevel scale
  10. Auxiliary handle
  11. Upper fixed guard
  12. Saw blade
  13. Saw blade wrenches
  14. Dust port adaptor
  15. Lower guard lift lever
  16. Parallel guide
  17. Blade locking bolt
  18. Outer flange
  19. Lower guard

Specifications

DEKO DKPCCSD150C1 Circular Saw specifications
Detailed specifications for the DKPCCSD150C1 Circular Saw.
AttributeValue
Model NumberDKPCCSD150C1
Rated Voltage220-240V~50/60Hz
Rated Input Power1500W
No-Load Speed4800/min
Blade Diameter185mm (7-1/4")
Blade Bore20mm (25/32")
Max. Cutting Capacity at 90°65mm (2-9/16")
Max. Cutting Capacity at 45°41mm (1-5/8")
Protection ClassII/回
Product Weight3.90kg (4.6kg / 4.7kg as per other sources)
Dimensions (L*W*H)25cm*28cm*23cm

Setup

WARNING: Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

Blade Installation and Replacement

For detailed visual instructions on blade installation and replacement, please refer to the relevant diagrams in the full instruction manual (PDF).

  1. Use the supplied 2 wrenches (13) to loosen the blade locking bolt (17).
  2. Take down the blade locking bolt (17) and the outer flange (18).
  3. Remove the blade clamp bolt (3) and outer flange (2).
  4. Raise the lower guard (19) by using the lift lever (15), and then remove the saw blade in a downward direction.
  5. Clean the saw blade flanges, then mount the new saw blade onto the output spindle and against the inner flange.
  6. Make sure the saw teeth and arrow on the blade is to be the same direction as the arrow on the lower guard.
  7. Reinstall the outer flange (2), and tighten the blade locking bolt (7). Make sure the locking bolt is secure enough.
  8. Make sure that the saw blade runs freely by turning the blade by hand.

Depth Adjustment

For detailed visual instructions on depth adjustment, please refer to the relevant diagrams in the full instruction manual (PDF).

  1. Lift the cutting depth lock lever (4).
  2. Hold the base plate flat against the edge of the workpiece and lift the body of the saw until the blade is at the right depth determined by the depth of cut scale (align the scale line).
  3. Lower the cutting depth lock lever (4) to lock the depth scale.

Bevel Adjustment

For detailed visual instructions on bevel adjustment, please refer to the relevant diagrams in the full instruction manual (PDF).

The preset angle between the saw blade and the base plate is 90°. You can adjust the cutting angle to carry out bevel cutting.

  1. Loosen the Lock knob for bevel scale (7).
  2. Adjust the base plate to the desired angle between 0° to 45° by checking the angle scale (9).
  3. Tighten the lock knob (7) after adjustment.

Dust and Chip Extraction

For detailed visual instructions on dust and chip extraction setup, please refer to the relevant diagrams in the full instruction manual (PDF).

  1. Connect a suitable vacuum cleaner (a) to the dust outlet of the circular saw.
  2. Connect a suitable vacuum cleaner (a) to the provided dust port adaptor (14) (vacuum cleaner not included). This will provide excellent dust extraction on the workpiece. The benefits are that you will protect both the equipment and your own health. Your work area will also be cleaner and safer.

WARNING: Dust created when working may be dangerous. Important! The vacuum cleaner you use for the extraction work must be suitable for the workpiece material. Check that all the parts are properly connected.

Parallel Guide Setup

For detailed visual instructions on parallel guide setup, please refer to the relevant diagrams in the full instruction manual (PDF).

The parallel guide is used for making cuts parallel to a workpiece edge at a chosen distance. Slide the parallel guide arm through both fixtures to achieve the required cutting distance and tighten the lock knob for parallel guide (8) to lock into position. It can be used from both sides of the base plate. There is a cutting guide notch on the front of the base plate for using with a parallel guide.

  • For straight cuts, use the 0° guide mark to align with your parallel guide scale.
  • For a 45° bevel cut, use the 45° guide mark to align with your parallel guide scale.

Securely clamp the parallel guide. Always make a trial cut to check the setting.

Operating Instructions

Switching On and Off

For detailed visual instructions on switching the saw on and off, please refer to the relevant diagrams in the full instruction manual (PDF).

Before engaging the ON/OFF switch, check that the saw blade is properly fitted and runs smoothly, and the blade locking bolt is well tightened.

  1. Plug the cord set into a power socket.
  2. To start the tool, press the lock-off button (3) first, then press the switch trigger (2).
  3. To turn the tool off, simply release the switch trigger (2).

Saw Operation (Cutting Procedures)

CAUTION: When using, always cut forward in a straight line without forcing the saw. Forcing or twisting the saw will put a strain on the motor, and at the very least result in decreased efficiency or possible overheating damage. More seriously, it could cause dangerous kickback of the saw resulting in severe injury.

  1. Always operate the saw firmly, using the rear and auxiliary handles.
  2. Rest the front edge of the base plate on the workpiece without touching the blade to the workpiece.
  3. Switch on and wait until full speed is attained, then advance the saw, keeping it flat and cutting smoothly until the cut is complete - Straight line sawing at a uniform speed of advance will obtain the best clean cuts.

After releasing the trigger switch, wait until the blade has fully stopped before withdrawing.

WARNING: All wood dust (including dust from composites like chipboards and fibre boards etc.) is hazardous to health. It can affect the nose, the respiratory system and the skin. For example MDF (medium density fibreboard) which contains formaldehyde is a known carcinogen. In addition to the above measures a correctly fitted dust mask, suitable for the activity and in accordance to the relevant standard, must be worn.

Pocket Cutting

  1. Disconnect the plug from the power supply before making any adjustments. Set the depth adjustment based on the thickness of the line drawing for the cut. Raise the lower guard by using the lift lever.
  2. With the blade barely above the material to be cut, start the saw and allow the blade to come to full speed. Gradually lower the blade onto the material to be cut using the front end of the base plate as a pivot point. When the blade starts cutting, release the lower guard. When the base plate is resting flat on the surface being cut, proceed cutting in a forward direction to the end of the cut. Allow the blade to come to a full stop before removing it from the cut. Never pull the saw backward since the blade will climb out of the cut and kickback will occur. Turn the saw around and finish the cut in a normal manner, sawing forward. Use a jigsaw or a hand saw to finish the cut in the corners, if required.

Cutting Large Sheets

  1. Large sheet or boards require support to prevent bends or sags. If you attempt to cut without leveling and properly supporting the work piece, the blade will tend to bind, causing kickback.
  2. Support the panel or board close to the cut. Be sure to set the blade adjustment so that you can cut through the material without cutting into the table or workbench. Suggestion: use two by fours to support the board or panel to be cut. If the piece is too large for the workbench, use the floor with the two-by fours supporting the wood.

Maintenance

WARNING: To prevent accidents, always unplug the saw from the power source before cleaning or performing any maintenance.

Cleaning

  • The saw may be cleaned most effectively using compressed air. Always wear safety goggles when using compressed air. If compressed air is not available, use a brush to remove dust and chips from the saw.
  • Motor ventilation vents and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through openings.
  • Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household cleaners containing ammonia. Do not use any of these to clean the saw.

Carbon Brushes

The brushes in your tool have been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend every two to six months the brushes be examined.

Always replace both brushes at a time. Entrust replacement of carbon brushes only to a qualified person. Only original parts should be used.

Power Cord

If the supply cord of this power tool is damaged, it must be replaced by a similar cord available through the service organization or a qualified technician.

Troubleshooting

Many operational issues can be prevented by following the safety and maintenance guidelines. Here are common issues and their resolutions:

  • Saw not turning on: Ensure the power cord is securely plugged in. Check if the switch is in the 'off' position before connecting to power. If the switch is faulty, the tool must be repaired by a qualified person.
  • Blade binding or kickback: This is often caused by dull or damaged blades, improper support of the workpiece, or forcing the saw.
    • Ensure the blade is sharp and clean.
    • Support large workpieces properly to prevent sagging.
    • Do not force the saw; let the blade cut at its designed rate.
    • Maintain a firm grip and proper body position to resist kickback forces.
    • If binding occurs, release the trigger and hold the saw motionless until the blade stops completely.
  • Lower guard not closing freely: This can be due to damaged parts, gummy deposits, or debris. The guard and spring must be serviced before use if not operating properly.
  • Excessive dust: Ensure the dust extraction system is properly connected and functioning. Use a suitable vacuum cleaner for the material being cut.
  • Tool overheating: Forcing the saw or twisting it during operation can cause overheating. Allow the tool to work at its designed rate and ensure proper ventilation.

User Tips

  • Understand Cutting Depth: The maximum cutting depth for this saw is 65mm (2-9/16") at 90 degrees and 41mm (1-5/8") at 45 degrees. Always adjust the depth according to your material to ensure clean cuts and prevent binding.
  • Proper Blade Selection: Always use blades with the correct size and shape arbor holes to ensure proper fit and safe operation.
  • Workpiece Support: For large panels, always provide adequate support on both sides of the cut line to prevent sagging and potential kickback.

Warranty and Support

Service Information

This tool is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 2 years from the original purchase date.

If the tool should fail some day in spite of our quality controls and materials, only have it repaired by an authorized electrician or contact your local distributor or service agent.

You can also contact us by email:

  • services@dekotools.com
  • support@dekotools.com

The warranty will not apply to the following cases:

  1. where this product has been subjected to misuse, abuse, accident or want of care;
  2. where this product has been used for a purpose for which it was not designed or is not suited;
  3. where the service of this product has been undertaken by a non-authorised person or company or if non-approved parts have been used.
  4. components that are subject to natural wear and tear caused by use in accordance with operating instructions.

For the complete and official instruction manual, please refer to the PDF document: DEKO DKPCCSD150C1 User Manual (PDF)

Disposal

The machine and packaging should be sorted for environmental-friendly recycling. Do not dispose of power tools into household waste! Please recycle them at collection points provided for the purpose. Ask your local authority for information about recycling.

Note: The Waste Electrical and Electronic Equipment (WEEE) symbol, indicating separate disposal, is typically found in the instruction manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.