staniot WSR300

Contents

Staniot Wireless Strobe Siren WSR300 User Manual

Model: WSR300 | Brand: staniot

1. Introduction

The Staniot Wireless Strobe Siren WSR300 is a powerful and versatile acoustic strobe siren designed to enhance your security system. Suitable for both indoor and outdoor environments, it features a loud 120dB alarm, a waterproof design, and a built-in 5000mAh battery with an optional solar charging capability. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and safety.

Staniot Wireless Strobe Siren WSR300

Figure 1: Staniot Wireless Strobe Siren WSR300

2. Main Features

  • 120dB High-decibel Alarm with 5 adjustable volume levels.
  • Two distinct alarm tone options.
  • Stylish and compact appearance.
  • Wireless and Wired Configuration options.
  • Excellent Waterproof and Tamper-proof design for outdoor durability.
  • Built-in 5000mAh large-capacity lithium battery for extended operation.
  • Optional Solar Panel Charging for continuous power (available with Package B).
  • Automatic saving of pairing records.
Icons representing key features: Solar charging, Wired & Wireless, Waterproof, 120dB alarm, 5000mAh Battery, Anti-tamper

Figure 2: Key Features of the Staniot Strobe Siren

3. Setup

3.1 Unpacking and Package Contents

Please check the contents of your package against the option you purchased:

  • Option A (Siren Only): Strobe Siren x1, User Manual x1, Screw Pack x1, Charger x1.
  • Option B (Solar Siren Kit): Strobe Siren x1, Solar Panel x1, User Manual x1, Screw Pack x1, Charger x1.
Package A: Strobe Siren Only

Figure 3: Package A - Strobe Siren Only

Package B: Solar Strobe Siren Kit

Figure 4: Package B - Solar Strobe Siren Kit

3.2 Component Identification

Familiarize yourself with the various parts and connections of the strobe siren:

Diagram of the siren's back panel showing Warning Light, Buzzer, Tamper Switch, DC6V-15V 1A power input, Volume Touch Button, Setting Touch Button, Solar Charging Interface (Optional) 5V 1A, Wired Input, and Battery Switch.

Figure 5: Siren Appearance & Function Diagram

  • Warning Light: Visual alarm indicator.
  • Buzzer: Produces the acoustic alarm sound.
  • Tamper Switch: Triggers an alarm if the siren is forcibly removed from its mounting.
  • DC6V-15V 1A: Main power input port.
  • Volume Touch Button: Adjusts the siren's volume.
  • Setting Touch Button: Used for configuration and pairing.
  • Solar Charging Interface (Optional) 5V 1A: Port for connecting the solar charging panel.
  • Wired Input: For wired connections to the alarm panel.
  • Battery Switch: To turn the internal battery on/off.

3.3 Initial Power-Up and Battery Activation

  1. Locate the Battery Switch on the back of the siren (refer to Figure 5).
  2. Switch the battery to the 'ON' position to activate the built-in 5000mAh battery.
  3. Connect the siren to the provided charger via the DC6V-15V 1A port for initial charging.

3.4 Installation

The Staniot Wireless Strobe Siren is designed for both indoor and outdoor use, featuring excellent waterproof performance. Choose a location that provides optimal sound and visual alert coverage.

  • Outdoor Installation: Mount the siren in a prominent location, such as on an exterior wall, where its 120dB alarm and strobe light can effectively deter intruders. Ensure it is securely fastened using the provided screw pack.
  • Indoor Installation: For indoor use, consider mounting it in a central location. Remember that the 120dB alarm is very loud; you may want to adjust the volume for indoor settings to avoid startling occupants.
Staniot Strobe Siren mounted on an outdoor wall, demonstrating its waterproof capability in rain.

Figure 6: Excellent Waterproof Performance for Outdoor Installation

3.5 Pairing with Alarm Panel

The siren must be paired with a compatible Staniot alarm host to function as part of a complete security system. It supports connection to Staniot alarm hosts including Secpanel 3, Secpanel 5, Secpanel 7, Secpanel 7 Pro, and SecCube 3.

  1. Ensure your Staniot alarm panel is powered on and accessible.
  2. On your alarm panel, navigate to the 'Connection' or 'Accessory' menu.
  3. Select the 'Siren' option to initiate the pairing process. The panel will prompt you to make the siren ready for pairing.
  4. Activate the siren's pairing mode. This is typically done by triggering the tamper switch (as shown in the video) or pressing a dedicated pairing button if available. The siren's warning light may flash to indicate it's in pairing mode.
  5. Once the siren is detected and paired, the alarm panel will confirm 'Pair code sent' or a similar message.
  6. Confirm the pairing on the alarm panel. The siren will emit a confirmation sound or light.

Video 1: Staniot Strobe Siren Pairing Demonstration

Diagram showing the Staniot Strobe Siren working in conjunction with an alarm panel.

Figure 7: Siren Working with Alarm Panel

4. Operating Instructions

4.1 Arming and Disarming

The Staniot Wireless Strobe Siren operates in conjunction with your paired alarm panel. When the alarm host enters an armed state (e.g., 'Away' or 'Home' mode), the siren will also enter the armed state, ready to activate upon detection of an intrusion.

When the alarm host is disarmed, the siren will also disarm, preventing false alarms.

4.2 Alarm Activation

If a sensor connected to your alarm panel is triggered while the system is armed, the alarm host will send an alarm signal to the siren. The siren will immediately activate, emitting a loud 120dB sound and flashing its warning light to deter intruders and alert occupants.

Image depicting the strobe siren alarming and deterring an intruder.

Figure 8: Siren Deters Intruders Instantly

4.3 Volume Adjustment

The siren offers 5 levels of adjustable alarm volume to suit different environments:

  • 120dB (Default)
  • 100dB
  • 80dB
  • 60dB
  • Mute

You can adjust the volume using the Volume Touch Button on the siren or through your connected alarm panel's settings. For indoor use, a lower decibel setting might be preferred to avoid startling family members, while the maximum decibel is ideal for outdoor deterrence.

Comparison of indoor (low decibel) and outdoor (high decibel) use of the siren.

Figure 9: Volume Adjustment for Indoor and Outdoor Scenarios

5. Maintenance

5.1 Battery Management

The siren is equipped with a built-in 3.7V 5000mAh lithium battery. For optimal performance, ensure the battery is charged. If you have the solar panel option (Package B), connect it to the siren's solar charging interface. The solar panel will continuously charge the internal battery, providing sustained power without frequent manual charging.

Image showing the siren with an icon indicating its 5000mAh built-in battery.

Figure 10: Built-in 5000mAh Battery

Image showing the siren on a house with a solar panel on the roof, indicating solar charging support.

Figure 11: Optional Solar Panel Charging

5.2 Waterproofing

The siren boasts excellent waterproof performance, making it suitable for outdoor installation. While designed to withstand various weather conditions, avoid submerging the device in water or exposing it to extreme pressure washing.

5.3 Cleaning

To clean the siren, gently wipe its exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the device's finish or internal components.

5.4 Tamper Protection

The built-in tamper switch will trigger an alarm if the siren is forcibly removed from its mounting. Ensure the siren is securely installed to prevent accidental tamper alarms.

6. Troubleshooting

  • Siren not pairing with alarm panel:
    - Ensure the siren's battery switch is ON and it has sufficient charge.
    - Verify that the alarm panel is in pairing mode and the siren is activated for pairing (e.g., by triggering the tamper switch).
    - Check the wireless frequency (433MHz) and encoding (EV1527) for compatibility with your alarm panel.
  • Siren not alarming:
    - Confirm that the siren is successfully paired with the alarm panel.
    - Ensure the alarm panel is in an armed state.
    - Check if the siren has power and the battery is not depleted.
    - Verify that the sensor triggering the alarm is functioning correctly.
  • Low or no sound from siren:
    - Check the volume level settings on the siren or through the alarm panel. Ensure it's not set to 'Mute'.
    - Ensure the buzzers are not obstructed.
  • Siren is not an independent device:
    - This siren is designed to work as an accessory to a Staniot alarm host. It cannot function independently as a standalone alarm system.

7. Specifications

ParameterValue
Power supplyDC6V-15V 1A
Built-in battery3.7V 5000mAh lithium battery
Standby current<10mA
Alarm current<1000mA
Wired zone2 (NC, NO)
Alarm volume120dB (5 levels adjustable)
Working temperature-20°C ~ +50°C
Relative humidity<95% (no condensation)
Wireless parameters433MHz, eV1527
Solar charging panelOptional
Product size270 × 180 × 47mm

Figure 12: Product Parameters

8. User Tips

  • Optimize Volume: Adjust the siren's volume based on its location. Use a lower setting for indoor areas to prevent discomfort, and the maximum 120dB for outdoor areas to effectively deter intruders.
  • Consider Solar Charging: For outdoor installations, opting for the Solar Siren Kit (Package B) provides continuous charging, reducing the need for manual battery maintenance and ensuring uninterrupted operation.
  • Check Compatibility: Always ensure your Staniot Wireless Strobe Siren is compatible with your existing Staniot alarm host (e.g., Secpanel 3, 5, 7, 7 Pro, SecCube 3) for seamless integration.

9. Warranty and Support

For warranty information, technical support, or any questions not covered in this manual, please contact Staniot customer service or refer to the official Staniot website. Keep your purchase receipt for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.