Road Top Wireless CarPlay Android Auto Multimedia Screen

Contents

Road Top Wireless CarPlay Android Auto Multimedia Screen User Manual

For BMW 3 Series E90, E91, E92, E93 (2005-2011)

Models: 10.25 inch and 12.3 inch

Innovation changes life

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your Road Top 10.25" or 12.3" Wireless CarPlay Android Auto Multimedia Screen. This kit is designed to upgrade your BMW 3 Series E90, E91, E92, E93 (2005-2011) without an existing OEM screen, adding full CarPlay and Android Auto functionality while retaining all original head unit features.

The system supports Apple and Android phone features, including navigation (Apple Maps, Google Maps), music streaming (Spotify), making/receiving calls, and using voice assistants like Siri. It integrates seamlessly with your vehicle, supporting existing button and steering wheel controls, and connects via console or glove box USB.

2. Safety Information

Important Safety Reminder:

  • Always ensure the vehicle engine is switched off before installing or connecting any cables to prevent electrical damage or injury.
  • If you are unsure about any installation steps, it is recommended to seek professional assistance.
  • Do not attempt to operate the device in a way that distracts you from driving.

3. Product Overview

3.1 Product List

The standard product package typically includes the following components. Please note that specific details may vary slightly depending on your car model.

  • Main Screen (10.25 inch or 12.3 inch)
  • Mounting Bracket (model-dependent)
  • Power Cable
  • USB Cable
  • AUX Cable
  • Standard Knob
Product Accessories List showing 10.25 inch and 12.3 inch screens, power cable, USB cable, AUX cable, and standard knob.
Figure 3.1: Product Accessories List

3.2 Ports Introduction

Familiarize yourself with the ports on the main screen and the power cable for proper connection.

Main Screen Ports

Main screen ports including LVDS cable, USB cable, and Power cable connections.
Figure 3.2: Main Screen Ports (LVDS, USB, Power)

Power Cable Connections

Power cable connections diagram showing various inputs and outputs like GND, 5V-out, Rear camera, Rear camera PWR, Audio out, ACC out, 360 DET, Video in.
Figure 3.3: Power Cable Connections

The power cable includes connections for:

  • GND (Ground)
  • 5V-out (5 Volt Output)
  • Rear camera
  • Rear camera PWR (Power)
  • Audio out
  • ACC out (Accessory Output)
  • 360 DET (360 Degree Detection)
  • Video in

4. Setup Instructions

4.1 Car Dashboard Removal

Detailed video guides for car dashboard removal are available for various car models. Please scan the QR codes provided in the original documentation to access these videos for your specific vehicle.

Image showing a template being aligned to the air-conditioner outlet for dashboard modification.
Figure 4.1: Aligning template for dashboard modification
Image showing a section of the car dashboard cut out for screen installation.
Figure 4.2: Dashboard section cut out for screen installation

4.2 Cables Connection

Ensure all connections are secure and correctly routed.

For Cars with Original i-Drive

If your car already has an internal i-drive system, there is no need to install an additional i-drive. No cables need to be connected for the original i-drive.

Wiring diagram for connecting the multimedia screen in a car with an original i-drive system.
Figure 4.3: Cables Connection with Original i-Drive

For Cars without Original i-Drive

If your car does not have an i-drive, it is recommended to install an external i-drive. The following diagram illustrates a sample connection solution.

Wiring diagram for connecting the multimedia screen in a car without an original i-drive system, showing an external i-drive connection.
Figure 4.4: Cables Connection without Original i-Drive

4.3 Resolution Setup

Before using the OEM system, you must set the correct screen resolution.

  1. Navigate to Setup > Car settings > Original Car's Screen Resolution.
  2. Select the resolution that matches your car's original screen resolution.

Reminder: Please restart the car after changing the resolution for the changes to take effect.

Screenshot of the resolution setup menu on the car multimedia screen.
Figure 4.5: Resolution Setup Screen

4.4 Sound Setup

Optical Fiber Cable Installation

If your car has an optical fiber cable, you must transfer it from the original power cable to the new power cable harness.

  1. Unplug the original power cable from the head unit.
  2. Connect the original power cable to the new power cable harness.
  3. Plug the new power cable into the head unit.
  4. Carefully move the optical fiber cable from the original connector to the new connector harness.
Diagram showing how to install the optical fiber cable by moving it from the original connector to the new harness.
Figure 4.6: Optical Fiber Cable Installation

GND Cable Connection

  • For CCC and NBT systems: The GND cable should be connected together.
Diagram showing the GND cable connected for CCC and NBT systems.
Figure 4.7: GND Cable Connection (CCC/NBT)
  • For CIC systems: To avoid sound distortion, you must disconnect the GND cable connection.
Diagram showing the GND cable disconnected for CIC systems.
Figure 4.8: GND Cable Disconnected (CIC)

5. Operating Instructions

5.1 System Switching

To switch between the Linux system and your car's original system:

  1. From the main menu, click the "Original car interface" icon to enter the original system.
  2. To return to the Linux system, simply touch anywhere on the screen.
Screenshot of the system switching interface, showing icons for Original car interface, CarPlay, Auto, and Bluetooth.
Figure 5.1: System Switching Interface

5.2 Sound Transmission Methods

The system supports two primary methods for sound transmission: AUX cable and Bluetooth.

AUX Cable Transmission

For most models, there is no need to connect an EXT-AUX cable to your car's AUX port, unless your car is a BMW 3/4 series or a 1/2 series.

AUX Setup Steps:

  1. Click the "Original Car" logo in the main menu to enter the original system.
  2. Navigate to "CD/Multimedia" or "Multimedia" and select "External devices".
  3. Choose "AUX front" as the sound transmission method.
  4. Keep the original system in "AUX front" status. Touch the screen to return to the Linux interface.

Bluetooth Transmission (for cars with Bluetooth function)

  1. First, connect your mobile phone to your car via Bluetooth.
  2. Turn on the "Use Car's BT Channel" switch in the system settings to activate Bluetooth functionality.
  3. Set Bluetooth as the sound transmission method.

5.3 Camera and DVR

Camera Setup

  • OEM Camera: If you have an OEM camera, select "Original camera" in Setup > Car Settings > Reversing Settings > Camera Type.
  • Aftermarket Camera: For aftermarket cameras, select "Aftermarket camera" in the same menu path.

Camera Cables Connection

For original cameras, no additional cables are needed. For aftermarket cameras, follow these guidelines:

  • Rear-Camera Cable connection for AT (Automatic Transmission): Connect "Rear-Camera" + "Rear-Camera-PWR".
  • Rear-Camera Cable connection for MT (Manual Transmission): Connect "Rear-Camera" + "360 DET".
  • Front Camera/DVR Cables Connection: The connection method for both front camera and DVR is the same. The product currently supports DVRs with RCA ports. Connect "Video-Input" + "Rear-Camera-PWR".
  • 360 Camera Cables Connection: The power cable does not have enough video input ports for 360 cameras. An additional decoder is required to integrate all camera video feeds before connecting the decoder to the video input port of the power cable.

Front-view Time Setup

To activate the front camera, you need to set the "Front-view Time" first. Shift to reverse gear, then to driving gear. The screen will enter the "Reversing Settings" interface, where you can set the "Front-view Time" (typically 0-20 seconds).

5.4 Wireless CarPlay / Android Auto

Before setting up CarPlay, ensure your phone's Bluetooth is disconnected from the car.

  1. Turn on your mobile phone's Wi-Fi switch.
  2. Turn on your mobile phone's Bluetooth.
  3. Search for the product's Bluetooth device, named "CARKIT", and pair with it.
  4. Allow the sync when prompted.
  5. Click "Allow" to use the CarPlay function.

The connection process for wireless Android Auto is similar to CarPlay.

Video 5.2: Demonstration of Road Top 12.3" Linux CarPlay Screen features, including touch function, wireless CarPlay/Android Auto, map navigation, music playback, steering wheel control, switching to original system, and rear camera support.

5.5 Wired CarPlay / Android Auto

To use wired CarPlay or Android Auto, simply connect your phone to the product using a USB cable.

5.6 Air-Play

Air-Play allows you to cast your iOS device screen to the multimedia display.

  1. Go to Setup > Smart Phone > Smart Phone List.
  2. Ensure "CarPlay" is turned OFF and "Air-Play" is turned ON.
  3. Turn on the screen's Wi-Fi and connect it to your iPhone's personal Hotspot.
  4. On your iPhone, open the shortcut menu bar, select "Screen Mirroring", and turn it on.

Android Mirror-link allows you to mirror your Android device screen to the multimedia display.

  1. Download the "Auto-link Pro" app on your Android phone. You can usually find a QR code in the product's documentation or on the seller's page to download the app.
  2. Complete the app installation on your phone.
  3. On the multimedia screen, go to Setup > Smart Phone > Smart Phone List.
  4. Turn on "Auto-link".

6. Troubleshooting

6.1 Screen Display Issues

  • Screen display wrong or showing incorrectly (e.g., purple/green bars):
    Reason: An incorrect resolution was selected (e.g., 1280*480 when the original car screen resolution is 800*480).
    Solution: Select the correct resolution matching your car's original screen resolution and restart the screen or the car.
  • Screen display incorrectly (half screen):
    Reason: An incorrect resolution was selected (e.g., 480*240 when the original car screen resolution is 800*480).
    Solution: Select the correct resolution matching your car's original screen resolution and restart the screen or the car.

6.2 Microphone Functionality

  • Product does not support original car microphone:
    The product has a built-in microphone for calls and voice commands. It does not utilize the car's original microphone.

6.3 Steering Wheel Control Buttons

  • Which steering wheel control buttons work?
    The product supports the right-side buttons of the steering wheel control. The left-side buttons may not function with this system.

6.4 Installation Fit Issues

  • Frame does not match the size of the template or leaves a gap:
    Suggestion: Double-check the compatibility of the screen size and bracket with your specific BMW model and year. Ensure the dashboard modification (if any) is precise. If issues persist, contact customer support with photos of the installation.

7. Specifications

FeatureSpecification
DinOne Din
TF/Micro SD Slot0
InterfaceRCA/Power/Aux/Video Input/USB
Operating SystemLinux
Voltage12 V
Item Weight2.7kg
Item Size10.25 inch or 12.3 inch
Output TypeColored
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support steering wheel control, Support 4G Network, Built-in GPS, Mobile Phone, MP3 players
Digital Media FormatMp3, WMA, MP4, JPEG
Resolution1920*720
Display Size10.2" or 12.3"
Brand NameRoad Top
OriginMainland China
For Vehicle Brands/ModelBMW
BMW Model Compatibility320i, BMW E90 E91 E92 E93 E60 E61 CCC system, BMW 3 5 Series
CertificationCE
MaterialPlastic and metal
SystemLinux
SupportWireless carplay, android auto, Steering wheel control, Navigation maps, USB play (music, video)

8. User Tips

  • Consider this upgrade if you lack an OEM screen: Users highly recommend this product as a significant upgrade, especially for BMW models that originally came without a factory screen.
  • Verify package contents upon arrival: Some users have reported missing small parts like bolts for securing the display or frame. Check your package thoroughly to ensure all necessary hardware is included.
  • Double-check compatibility and measurements: If you experience issues with the frame not matching the dashboard template or leaving gaps, re-verify that you have selected the correct screen size and model variant for your specific BMW E90/E91/E92/E93.
  • Utilize RHD installation videos: For right-hand drive (RHD) BMW E90 models, refer to the detailed installation videos provided via QR codes for specific mounting instructions to ensure proper fit and function.

9. Warranty and Support

The Road Top Multimedia Screen comes with a 1-Year Warranty. For any warranty claims or technical support, please refer to the contact information below.

10. Contact Information

If you require any assistance or have questions regarding your product, please contact us via the purchase platform.

When contacting support, please provide the following information to help us assist you more efficiently:

  1. Your order ID.
  2. The car model and year (e.g., BMW E90, 2008).
  3. A detailed description of the problem you are experiencing. Including videos or pictures of the issue would be greatly appreciated and can help in finding a quicker solution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.