Introduction
This manual provides instructions for the installation, operation, and maintenance of your SHIMANO SPD Cleat Set. The set includes two models: SM-SH51, designed for single-direction release, and SM-SH56, offering multi-directional release. Both models are intended for use with SPD-compatible mountain bike (MTB) cycling shoes and pedals.

Figure 1: SHIMANO SPD Cleat Set, showing both SM-SH51 and SM-SH56 types with their respective components.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | SHIMANO |
| Model Number | SH51/SH56 |
| Type | Self-locking Pedal |
| Pedal Category | Self-locking Pedal |
| Pedal Device Category | Pedal |
| Use | Mountain Bikes |
| Material | Aluminum/Alloy |
| Origin | Mainland China |
| High-concerned chemical | None |
Model Specific Features:
- SM-SH51 (Single Direction Release):
- Release Type: Single direction release.
- Release Method: Release cleats from pedals by twisting heels outward.
- Cleat Nut: Without cleat nut specification.
- Construction: Cold forged and specially heat treated for increased durability and rigidity under severe conditions.
- SM-SH56 (Multi-Directional Release):
- Release Type: Multi-directional release.
- Release Method: Release cleats from pedals by twisting heels in any direction.
- Cleat Nut: Without cleat nut specification.
- Construction: Cold forged and specially heat treated for increased durability and rigidity under severe conditions.
Package Dimensions:
- Length: 10 cm
- Width: 10 cm
- Height: 2 cm
- Weight: 0.2 kg
Setup and Installation
The SHIMANO SPD Cleat Set is designed for easy installation on compatible cycling shoes. Ensure you have the correct tools, typically a 4mm hex key, for installation.
Components Overview:

Figure 2: SM-SH51 Cleat Set components. Each set includes two cleats, two cleat plates, and four mounting screws.

Figure 3: SM-SH56 Cleat Set components. Note the 'M' marking on the multi-directional release cleats.
Installation Steps:
- Prepare Your Shoes: Locate the two-bolt mounting holes on the sole of your SPD-compatible cycling shoes. Remove any existing cleats or protective covers.
- Position the Cleat Plate: Insert the small, rectangular cleat plate (washer) into the recessed area on the sole of your shoe, aligning its holes with the shoe's mounting holes.
- Attach the Cleat: Place the cleat over the cleat plate, aligning the cleat's slots with the holes in the cleat plate and shoe. The cleat can be adjusted forward/backward and rotated slightly for optimal positioning.
- Insert Screws: Insert the four mounting screws through the cleat and into the cleat plate.
- Initial Tightening: Hand-tighten the screws to hold the cleat in place, allowing for minor adjustments.
- Adjust Cleat Position:
- Fore/Aft Adjustment: Adjust the cleat forward or backward to position the ball of your foot over the pedal spindle.
- Lateral Adjustment: Some shoes and cleats allow for minor side-to-side adjustment.
- Rotational Adjustment (Float): Adjust the angle of the cleat to match your natural foot angle on the pedal. This affects the "float" or rotational freedom your foot has while clipped in.
It is recommended to start with a neutral position and fine-tune after a short ride to find the most comfortable and efficient setup.
- Final Tightening: Once the desired position is achieved, securely tighten all four screws using a 4mm hex key. Do not overtighten, but ensure they are firm to prevent cleat movement during riding. Refer to your shoe or pedal manufacturer's recommendations for specific torque values if available.
Note: The cleat set does not include cleat nuts, as these are typically integrated into SPD-compatible cycling shoes.
Operating Instructions
Understanding how to clip in and out of your SPD pedals is crucial for safe and effective cycling.
Clipping In:
- Position the front of your cleat over the front engagement point of the pedal.
- Press down firmly with your heel, pushing the cleat into the pedal mechanism until you hear a "click." This indicates that the cleat is securely engaged.
- Practice clipping in and out in a safe, open area before riding in traffic or on challenging terrain.
Clipping Out:
- For SM-SH51 (Single Direction Release): To release your foot, twist your heel firmly outward, away from the bicycle. The cleat will disengage from the pedal.
- For SM-SH56 (Multi-Directional Release): To release your foot, twist your heel firmly in any direction (outward, inward, or upward). The cleat will disengage from the pedal. This type offers easier release, which can be beneficial for beginners or those riding in technical terrain.
Always anticipate when you need to unclip, especially when approaching stops or obstacles. Practice regularly to build muscle memory.
Maintenance
Regular maintenance will prolong the life of your cleats and ensure consistent performance.
- Cleaning: After riding in muddy or dirty conditions, clean your cleats and the pedal engagement area with a brush and water. Ensure they are dry before storage.
- Inspection for Wear: Regularly inspect your cleats for signs of wear. SPD cleats are consumable items and will wear down over time, especially if you walk frequently in your cycling shoes. Worn cleats can lead to difficulty clipping in/out or accidental release. Replace them when significant wear is visible.
- Check Screw Tightness: Periodically check that the cleat mounting screws are securely tightened. Loose screws can cause cleats to shift, leading to discomfort or inefficient power transfer.
- Lubrication (Pedals): While cleats themselves don't require lubrication, ensure your SPD pedals are clean and lubricated according to their manufacturer's instructions for smooth engagement and release.
Troubleshooting
- Difficulty Clipping In/Out:
- Check for excessive dirt or debris in the cleat or pedal mechanism. Clean thoroughly.
- Inspect cleats for wear. Severely worn cleats may not engage properly.
- Adjust pedal tension (if your pedals allow). Higher tension makes clipping in/out harder, lower tension makes it easier.
- Cleats Feel Loose or Shift:
- Tighten the cleat mounting screws.
- If screws are tight but cleats still shift, the cleats may be worn beyond their useful life and require replacement.
- Accidental Release:
- This can be dangerous. Immediately check cleat wear and screw tightness.
- Increase pedal tension if possible.
- Ensure you are using the correct cleat type for your riding style (SM-SH51 for more secure hold, SM-SH56 for easier release).
User Tips
- Practice Makes Perfect: If new to clipless pedals, practice clipping in and out repeatedly in a safe, stationary environment (e.g., leaning against a wall) until it becomes second nature.
- Start with Lower Tension: If your pedals have adjustable tension, start with the lowest setting to make clipping out easier, then gradually increase as you gain confidence.
- Regular Checks: Make it a habit to check your cleat screws before each ride, especially if you ride frequently or on rough terrain.
- Consider Cleat Type: SM-SH56 (multi-directional release) is often recommended for beginners due to its easier release, while SM-SH51 (single-direction release) offers a more secure connection for experienced riders.
Warranty and Support
SHIMANO products are manufactured to high standards. For specific warranty information, please refer to the official SHIMANO website or the documentation provided with your original purchase. Cleats are wear-and-tear items and typically not covered under long-term warranties for wear.
For technical support or inquiries regarding your SHIMANO SPD Cleat Set, please contact your retailer or an authorized SHIMANO service center.