LG EBR80085803

Contents

LG Refrigerator Inverter Control Board EBR80085803 Instruction Manual

Model: EBR80085803, EBR800858, EBR80085802

1. Product Overview

This document provides instructions for the LG Refrigerator Inverter Control Board, a critical component responsible for managing the refrigerator's compressor operation and overall cooling efficiency. This board is designed as a replacement part for compatible LG refrigerator models.

LG Refrigerator Inverter Control Board EBR80085803

Figure 1: LG Refrigerator Inverter Control Board EBR80085803. A detailed view of the green circuit board, showing various electronic components, connectors, and integrated circuits. The model number EBR80085803 is visible on a label.

2. Safety Information

Before attempting any installation or repair, please read and understand all safety precautions. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

  • Disconnect Power: Always unplug the refrigerator from the power outlet before beginning any work.
  • Qualified Personnel: Installation and replacement should ideally be performed by a qualified appliance technician.
  • Static Electricity: Electronic components are sensitive to static electricity. Handle the board by its edges and avoid touching components directly. Consider using an anti-static wrist strap.
  • Inspect Connections: Ensure all connectors are properly seated and secured after installation.

3. Setup and Installation

This inverter control board is a replacement part. The installation process involves removing the old board and installing the new one. Specific steps may vary by refrigerator model.

  1. Prepare the Refrigerator:
    • Unplug the refrigerator from the wall outlet.
    • Move the refrigerator away from the wall to access the rear panel, if necessary.
  2. Access the Control Board:
    • Locate the access panel, typically on the rear of the refrigerator, that covers the control board.
    • Carefully remove the screws securing the access panel and set it aside.
  3. Disconnect the Old Board:
    • Before disconnecting, take clear photos of the existing wiring connections for reference.
    • Carefully disconnect all wire harnesses and connectors from the old inverter control board. Note their positions.
    • Remove any screws or clips holding the old board in place and carefully remove it.
  4. Install the New Board:
    • Position the new inverter control board in the same location as the old one.
    • Secure it with the original screws or clips.
    • Reconnect all wire harnesses and connectors to their corresponding ports on the new board, referring to your photos if needed. Ensure all connections are firm and secure.
  5. Reassemble and Test:
    • Replace the access panel and secure it with its screws.
    • Plug the refrigerator back into the power outlet.
    • Listen for the compressor to start and observe the refrigerator's operation for any unusual sounds or behavior. Allow several hours for the refrigerator to reach its set temperature.

4. Operating Instructions

The inverter control board is an internal component of your refrigerator and does not have user-operable controls. Its function is automatic:

  • It regulates the speed of the compressor, allowing it to run at variable speeds rather than just on or off. This optimizes cooling performance and energy efficiency.
  • It manages power delivery to various refrigerator components based on temperature sensors and user settings.

Once installed, the board operates as part of the refrigerator's normal function. No direct user interaction is required for its operation.

5. Maintenance

The inverter control board is a sealed electronic component and requires no routine user maintenance. To ensure its longevity and proper function:

  • Ensure the area around the board (behind the refrigerator) is kept clean and free from dust and debris, which can impede airflow and lead to overheating.
  • Avoid exposing the refrigerator to extreme temperatures or high humidity, which can affect electronic components.
  • Do not attempt to clean the board directly with liquids or abrasive materials.

6. Troubleshooting

If your refrigerator is not functioning correctly after replacing the inverter control board, consider the following troubleshooting steps:

  • No Power/No Operation:
    • Check if the refrigerator is properly plugged into a working outlet.
    • Verify that all wire harnesses on the new board are securely connected.
    • Check the household circuit breaker.
  • Refrigerator Not Cooling:
    • Ensure the refrigerator doors are sealing properly.
    • Confirm that the temperature settings are correct.
    • If the compressor is not running, or running erratically, re-check all connections to the board.
  • Unusual Noises:
    • Ensure no wires or components are touching the fan blades or other moving parts.

If the problem persists after checking these points, it may indicate a faulty new board, an issue with another refrigerator component, or an incorrect diagnosis of the original problem. In such cases, it is recommended to consult a qualified appliance technician.

7. Specifications

FeatureDetail
Product TypeRefrigerator Parts
Model NumbersEBR80085803, EBR800858, EBR80085802
CompatibilityLG Refrigerators (specific models may vary)
OriginMainland China
ElectricNo (Component, not a standalone electrical appliance)
High-concerned chemicalNone
Package Length26 cm
Package Width22 cm
Package Height8 cm
Package Weight1.5 kg

8. User Tips

  • Verify Compatibility: Always double-check the model number of your existing board and refrigerator to ensure this replacement part is fully compatible before purchase and installation.
  • Document Disassembly: Take photos or make notes during the disassembly process, especially for wiring connections. This will greatly assist during reassembly.

9. Warranty and Support

For warranty information regarding this replacement part, please refer to the terms provided by your seller or the original manufacturer. Keep your purchase receipt as proof of purchase.

If you encounter issues that cannot be resolved with the troubleshooting steps provided, it is recommended to contact a certified appliance repair technician for professional assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.