Introduction
Thank you for purchasing the CHENXI 973 Men Quartz Watch. This timepiece combines classic design with modern functionality, featuring a moon phase display, date function, and a precise chronograph. This manual provides detailed instructions to help you set up, operate, and maintain your watch for years of reliable service.
Figure 1: CHENXI 973 Men Quartz Watch (White Dial, Brown Strap)
Product Overview
Figure 2: Watch Dial and Button Functions
- Time Minute Hand: The sub-dial at the 9 o'clock position, completes 1 lap in 1 hour.
- Second Hand: The sub-dial at the 6 o'clock position, completes 1 lap in 1 minute.
- Calendar Window: Displays the exact date, located at the 3 o'clock position.
- Lunar Hour Hand: The sub-dial at the 12 o'clock position, completes 1 lap in 24 hours, indicating day or night.
- Stopwatch: Activated and controlled by the pushers.
- Crown: Used for adjusting time and date.
- Pushers: Used for chronograph (stopwatch) operations.
Setup and Initial Adjustment
- Unpacking: Carefully remove the watch from its packaging.
- Strap Adjustment: The watch comes with a leather strap. Adjust the buckle to ensure a comfortable fit on your wrist.
- Setting the Time:
- Pull the crown out to position 2 (farthest out).
- Rotate the crown to set the hour and minute hands to the correct time. Pay attention to the 24-hour lunar hand to distinguish AM/PM.
- Once set, push the crown back into position 0 (normal position).
- Setting the Date:
- Pull the crown out to position 1 (middle position).
- Rotate the crown to set the correct date in the calendar window.
- Once set, push the crown back into position 0.
Figure 3: Watch on Wrist
Operating Instructions
Timekeeping and Displays:
- The main hands indicate the current hour and minute.
- The sub-dial at 9 o'clock tracks minutes for the chronograph (up to 60 minutes).
- The sub-dial at 6 o'clock tracks seconds for the chronograph (up to 60 seconds).
- The sub-dial at 12 o'clock (Lunar Hour Hand) displays the 24-hour cycle, often depicted with a moon/sun motif to indicate day or night.
- The date is shown in the window at 3 o'clock.
Figure 4: Moon Phase Day/Night Display
Using the Chronograph (Stopwatch):
- Start: Press the top pusher to start the chronograph. The second hand (at 6 o'clock) will begin to move.
- Stop: Press the top pusher again to stop the chronograph. The elapsed time will be indicated by the second and minute sub-dials.
- Reset: After stopping, press the bottom pusher to reset the chronograph hands to their zero positions. Ensure the chronograph is stopped before attempting to reset.
Figure 5: Luminous Hands for Night Visibility
Maintenance and Care
Water Resistance:
Your CHENXI 973 watch is rated 3 ATM (30 meters) water resistant. This means it is suitable for:
- Water drops
- Rain
- Hand washing
It is NOT suitable for:
- Car wash
- Shower
- Swimming
- Plunge
- Shallow dive
- Diving depth
Note:
- Do not expose the watch to detergents and other chemicals.
- If contact with seawater occurs, rinse immediately with fresh water to avoid chemical corrosion residues.
- Never operate the crown or pushers when the watch is wet or submerged in water.
Figure 6: Water Resistance Guidelines
Cleaning:
Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, use a slightly damp cloth and allow it to air dry completely. Avoid harsh chemicals or abrasive materials.
Leather Strap Care:
The leather strap is made of two layers for flexibility and abrasion resistance. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, and excessive moisture. Clean regularly and allow to dry naturally.
Figure 7: Leather Strap Construction
Battery Replacement:
As a quartz watch, your CHENXI 973 is powered by a battery. When the watch stops or the second hand begins to skip, it's an indication that the battery needs to be replaced. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
Troubleshooting
- Watch Not Running: Check if the crown is fully pushed in (position 0). If it is, the battery may need replacement.
- Incorrect Time/Date: Refer to the "Setting the Time" and "Setting the Date" sections to re-adjust.
- Chronograph Not Resetting to Zero: Ensure the chronograph is stopped (press the top pusher once) before pressing the bottom pusher to reset. If it still doesn't reset correctly, a professional adjustment may be needed.
- Condensation Inside the Watch: This indicates a loss of water resistance. Have the watch inspected and repaired by a professional immediately to prevent further damage.
Specifications
Figure 8: Watch Details and Dimensions
| Feature | Specification |
|---|---|
| Model Number | CHENXI 973 |
| Movement | Quartz |
| Case Material | Alloy |
| Case Shape | Round |
| Case Thickness | 13.5mm |
| Dial Diameter | 44mm |
| Dial Window Material Type | Hardlex (Mineral Reinforced Glass) |
| Band Material Type | Leather (Two layers) |
| Band Width | 22mm |
| Band Length | 24cm |
| Clasp Type | Buckle (Metal Pin clasp) |
| Water Resistance Depth | 3Bar (30M) |
| Features | Auto Date, Moon Phase, Chronograph, Luminous Hands |
| Weight | 61g (Belt) |
| Certification | CE |
User Tips
- The leather strap may feel a bit stiff initially. It will soften with regular wear.
- The watch offers a luxurious appearance for its price point, making it a great value.
- All functions, including the chronograph and date, are designed to work effectively.
- The dial design is highly praised for its visual appeal.
Warranty and Support
For any issues, questions, or warranty claims, please contact the seller or retailer from whom you purchased the watch. They will be able to provide assistance and guide you through the necessary steps.
Product Video
Video 1: Overview of the CHENXI 973 watch, showcasing its design and features.