1. Product Overview
This Automotive Touch-up Paint Pen is designed for repairing small and shallow scratches on Toyota vehicles. It features a dual-purpose design, combining a fine pen tip for precise application on small scratches and a brush for broader coverage on larger areas. The paint is formulated to match original car colors, offering an effective solution for minor paint damage.
2. Specifications
| Feature | Detail |
|---|---|
| Capacity | 12mL (paint pen) |
| Origin | Mainland China |
| High-concerned chemical | None |
| Applicable Car Brands | Toyota/Toyota |
| Working with Objects | Special (Automotive Paint) |
| Available Colors (Examples) | Platinum Pearl 089, Super White 040, Skyrim White 040, Pearl White 070, Bright Oil 12ML |
3. Setup and Preparation
- **Clean the Area**: Thoroughly clean the scratch area before application. Use scratch wax to wipe the car surface several times, rubbing hard to remove dirt and minor imperfections.
- **Protect Surrounding Areas**: Cover intact areas of the paint surface around the scratch with tape to prevent accidental application.
- **Shake the Pen**: Shake the touch-up pen vigorously for at least 10 seconds to ensure the paint is well-mixed.
- **Choose Application Method**:
- **Pen Tip**: For small scratches (around 1CM), pull out the white cover upwards to use the fine pen tip.
- **Brush**: For larger scratches or general application, rotate the white cover counterclockwise to access the brush inside. The brush is generally easier to operate for most users.
- **Color Test**: Before applying to the car, apply a small amount of paint on a test paper or an inconspicuous area to check if the color matches your car's paint. Proceed only if the color is similar.
4. Operating Instructions
- **Apply Paint**: Carefully apply the paint to the scratch position using either the pen tip or the brush, depending on the scratch size.
- **Layering (if needed)**: If the scratch is not completely covered after the first application, allow the first coat of paint to dry for approximately 3 hours. Then, apply a second coat. Repeat this process until the defect is fully covered.
- **Drying**: Allow all applied paint to dry completely.
- **Finishing (Optional)**: Once the paint is dry, you may use fine-grit sandpaper or a soft cloth to gently polish the repaired area flat. Afterward, wipe the area clean with scratch wax.
**Important**: For best results, perform all steps on a sunny day to ensure proper drying and product effectiveness.
5. Maintenance
- After each use, ensure the pen cap and brush cover are tightly sealed to prevent the paint from drying out.
- Store the touch-up pen and scratch wax in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep out of reach of children and pets.
6. Troubleshooting
- **Deep Scratches**: This paint pen is primarily for small, shallow scratches (where the primer is not visible). Deep scratches that expose the primer cannot be fully repaired by the pen alone. For deep scratches, additional patching materials are required to fill the dent before applying paint and a final varnish.
- **Color Differences**: Pearl white (e.g., 070) is known to be a difficult color to match perfectly, and slight color differences may occur. Always perform a color test on an inconspicuous area first.
- **Uneven Application**: Ensure the surface is clean and dry before application. Apply thin, even coats, allowing sufficient drying time between layers to prevent unevenness.
7. User Tips
- **Optimal Conditions**: Always use the touch-up pen on sunny days to ensure the paint dries properly and achieves the best results.
- **Brush vs. Pen Tip**: For most personal use, the brush application method (accessed by twisting the cover counterclockwise) is generally easier to control and provides a smoother finish than the fine pen tip.
- **Pre-Application Test**: Always test the paint color on a piece of paper or a hidden part of the car before applying it to the visible scratch. This helps confirm the color match and familiarizes you with the application.
- **Thorough Cleaning**: Don't underestimate the importance of cleaning the scratch area and rubbing it vigorously with scratch wax. This prepares the surface for optimal paint adhesion.
- **Patience with Layers**: If multiple coats are needed, be patient and allow each layer to dry completely (approximately 3 hours) before applying the next. Rushing this step can lead to an uneven or clumpy finish.
8. Warranty and Support
For any questions regarding product warranty, returns, or technical support, please contact the seller directly. The seller, "Auto And Bike Accessories Dula Shop Store", is committed to assisting customers and will handle inquiries within 24 hours.
