1. Introduction
The Hantek TO1152D is a new generation multi-function full touch screen tablet digital oscilloscope designed for portability and versatility. It integrates an oscilloscope, multimeter, signal generator, and spectrum analyzer into a single, compact device. Its thin and lightweight body, combined with a unique hanging design, makes it easy to carry and use in various environments. The device features a durable, anti-fall and shock-resistant construction, and is powered by a large-capacity battery with fast charging support for extended operation.
Video: Hantek TO1000 Series Product Overview, showcasing its multi-functionality and portability.

Image: Main interface of the Hantek TO1152D, highlighting its integrated functions.
2. Package Contents
Please check the package carefully for the following items:
- Hantek TO1152D Host Unit (x1)
- Oscilloscope Probe (x2 for 4-channel models, x1 for 2-channel models)
- Multimeter Probe (x1, for TO1000C/D Series standard configuration only)
- Crocodile Clip (x2 for 4-channel models, x1 for 2-channel models; one additional for models with signal source function)
- 18W Adapter (x1)
- Type-C Charging Cable (x1)
- Instrument Package (x1)






3. Setup
3.1 Battery Installation and Charging
The Hantek TO1152D comes with a built-in 10000mAh removable lithium battery. Ensure the battery is properly seated before first use. To charge the device, use the provided 18W adapter and Type-C charging cable. The device supports fast charging, allowing you to quickly replenish power. The Type-C interface is compatible with many mobile phone chargers, offering convenience.


3.2 Initial Power-On
Press and hold the power button to turn on the device. The multi-touch screen will display the main interface, offering access to various functions.
3.3 Connecting Probes
Depending on the function you intend to use (oscilloscope or multimeter), connect the appropriate probes to the designated ports on the device. Ensure connections are secure.

Image: Input ports for AFG and Oscilloscope Channels (CH1-CH4).
4. Operating Instructions
4.1 General Touch Screen Operation
The device features a multi-touch large screen with an 800*480 resolution. The user interface is designed to be friendly and easy to use. Navigate through menus and adjust settings using touch gestures similar to a tablet device.


4.2 Oscilloscope Function
The Hantek TO1152D functions as a 4-channel digital storage oscilloscope with a bandwidth up to 250MHz, a sampling rate of 1GS/s, and a storage depth of 8M. It supports various trigger types including edge, slope, pulse width, video, and timeout. Up to 42 measurement functions are available for comprehensive analysis.

Image: Oscilloscope display showing multiple channels and measurement results.
4.3 Signal Generator Function (AFG)
The arbitrary function signal generator offers an output frequency up to 25MHz, 12-bit high resolution, and a 200MS/s sampling rate. It includes a variety of built-in arbitrary waveforms and supports AM/FM modulation. The output resistance can be switched between high and low impedance.

Image: Signal Generator interface for waveform and parameter selection.
4.4 Digital Multimeter Function (DMM)
The high-precision multimeter function allows for AC and DC voltage, current, resistance, capacitance, diode, and on-off measurements. It also features a data recording function to monitor and record changes in these parameters over time, generating trend graphs or allowing data export.

Image: Multimeter display showing voltage measurement and data trend.
4.5 Waveform Storage
The device supports one-key waveform storage, providing a convenient and quick way to save important measurement data.
5. Maintenance
5.1 Cleaning
To clean the device, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the ports or screen edges. Do not use abrasive cleaners or solvents.
5.2 Battery Care
To maximize battery life, avoid fully discharging the device frequently. Store the device in a cool, dry place when not in use for extended periods. The device has a long-lasting battery life and can stand by for up to half a year, but regular charging is recommended if stored for very long durations.
5.3 General Care
The Hantek TO1152D features an anti-fall and shock-resistant design. However, avoid unnecessary drops or impacts. When using the hanging feet, ensure the device is securely placed to prevent accidental falls. Keep the device away from extreme temperatures, humidity, and direct sunlight.
6. Troubleshooting
- Device does not power on: Ensure the battery is charged. Connect the device to the charger and try again. If the battery is removable, ensure it is correctly installed.
- Screen unresponsive: Try restarting the device. If the issue persists, ensure the screen is clean and free from debris.
- Inaccurate measurements: Check that probes are correctly connected and calibrated. Ensure the correct function mode (oscilloscope, multimeter) is selected for your measurement.
- Fast battery drain: Reduce screen brightness or disable unused functions to conserve power. Ensure the device is fully charged before use.
- Charging issues: Verify that the 18W adapter and Type-C cable are functioning correctly. Try a different compatible charger if available.
7. Specifications
| Feature | Specification (TO1000 Series) | Specification (TO1112 Series) |
|---|---|---|
| Brand Name | Hantek | |
| Model Number | TO1152D (Other models: TO1154D, TO1204D, TO1254D, TO1112, TO1112C, TO1112D) | |
| Certification | CE | |
| Origin | Mainland China | |
| DIY Supplies | Electrical | |
| Digital Channels | 4 | 2 |
| Bandwidth | 100-349MHz (TO1152D: 150MHz, TO1204D: 200MHz, TO1254D: 250MHz) | 110MHz |
| Real Time Sampling Rate | 1GSa/S | 250MSa/S |
| Record Length | 8M | |
| Max Waveform Capture Rate | 30,000wfm/s | |
| Display Size | 5.0 - 6.9 Inches | |
| Display Resolution | 640*480 Pixels | |
| Battery Included | Yes | |
| IS Battery Demountable | Yes | |
| High-concerned chemical | None | |
| Horizontal Scale Range | 2ns/div~100s/div (1, 2, 5 sequence) | 2ns/div~100s/div (1, 2, 5 sequence) |
| Incremental Time Measurement Accuracy (Full Bandwidth) | ± (1 sampling interval +100ppm× reading +0.6ns) >16 times on average ±(1 sampling interval +100ppm× reading +0.4ns) Sampling interval = seconds/grid ÷200 | ± (1 sampling interval +100ppm× reading +0.6ns) >16 times on average ±(1 sampling interval +100ppm× reading +0.4ns) Sampling interval = seconds/grid ÷200 |
| A/D Converter | 8-bit resolution, each channel sampled simultaneously | |
| Vertical Scale Range | 2mV/div~10V/div at input BNC | 10mV/div~10V/div at input BNC |
| Vertical Resolution | 8bit | |
| Vertical Sensitivity Range | 2mV/div~10V/div (TO1000 Series) 10mV/div~10V/div (TO1112 Series) | |
| Offset Range | ±1V (2mV/div~100mV/div) ±10V (200mV/div~1V/div) ±50V (2V/div~10V/div) | ±1Vmax (100mV/div) ±10Vmax (1V/div) ±50Vmax (10V/div) |
| Dynamic Range | ±5div (8bit) | |
| Optional Analog Bandwidth Limitation, Typical | 20MHz, Each channel is independently selectable | |
| DC Gain Accuracy | ±3% FullScale | |
| Isolation Between Channels | 40dB, DC to the maximum rated bandwidth of each model | |
| Note: Bandwidth reduced to 6MHz when using a 1X probe. | ||



8. User Tips
- Maximize Portability: Utilize the unique hanging design to free your hands when working in tight spaces or on the go.
- Efficient Charging: Take advantage of the Type-C fast charging capability. You can often use your mobile phone's fast charger for convenience.
- Data Logging: For long-term monitoring, remember to use the multimeter's data recording function to track trends in voltage, current, or resistance.
- Quick Waveform Capture: Use the one-key waveform storage feature to quickly save important measurement results for later analysis.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Hantek website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.