1. Introduction
Thank you for choosing the K&F Concept NP-FW50 rechargeable battery and dual USB charger. This product is designed to provide reliable power for your compatible Sony cameras, offering a convenient and efficient charging solution. This manual will guide you through the proper use and care of your new battery and charger.
2. Safety Information
Please read and understand all safety warnings before using this product. Failure to follow these instructions may result in fire, electric shock, or injury.
- Battery Safety:
- RISK OF FIRE, BURNING OR BURSTING.
- DO NOT OPEN, CRUSH, SHORT-CIRCUIT, HEAT ABOVE 60°C/140°F OR INCINERATE.
- Use only the specified charger for charging.
- Do not disassemble or modify the battery.
- Keep batteries away from children.
- Charger Safety:
- Do not expose the charger to rain or moisture.
- Do not operate the charger if it has been damaged in any way.
- Unplug the charger from the power source when not in use.
3. Product Overview
3.1 Battery Features
- Model: NP-FW50
- Type: Lithium Ion (Li-ion)
- Capacity: 1100mAh/Piece
- Rated Voltage: 7.4V
- Energy: 8.1Wh
- Built-in multiple protection features for safe and reliable operation.
3.2 Charger Features
- Dual USB Charger: Capable of charging two NP-FW50 batteries simultaneously.
- Input Type: Type-C and Micro USB ports for versatile power input.
- Input Voltage: 5V
- Input Current: 2.1A
- Output Energy: 8.4V 700mA (for 1 battery) | 8.4V 500mA (for 2 batteries)
- LCD Digital Display Screen: Shows charging status for each battery.
3.3 Compatibility
The K&F Concept NP-FW50 battery and charger are 100% compatible with original Sony NP-FW50 batteries and a wide range of Sony cameras, including but not limited to:
- Sony Alpha 7, A7, Alpha 7R, A7R II, A7 II, A7S, A7S II, A7M2, A7SM2, A7RM2
- A5000, A6000, A6300, A6500, a3000
- NEX-3, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3
- SLT-A33, SLT-A35, SLT-A37, SLT-A55V
- Cyber-shot, DSC-RX10
4. Setup
- Unpack: Carefully remove the battery(ies) and charger from their packaging.
- Insert Batteries: Align the battery contacts with the charger's terminals and gently slide the battery(ies) into the charging slot(s) (CH1 and CH2). Ensure they are securely seated.
- Connect Power: Connect the charger to a power source using either the Micro USB or Type-C USB cable. You can use a USB wall adapter, car charger, laptop, or power bank.
5. Operating Instructions
- Initiate Charging: Once connected to a power source, the charger's LCD digital display will activate, showing the current charge status of each inserted battery.
- Monitor Charging Status: The LCD screen displays battery charge levels using icons:
- [Empty Battery Icon]: 0-25% charged
- [Quarter Battery Icon]: 25-50% charged
- [Half Battery Icon]: 50-75% charged
- [Full Battery Icon]: 75-100% charged
- Charging Completion: When a battery is fully charged, its corresponding icon on the LCD display will show a solid full battery icon, and the charging process for that slot will cease.
- Remove Batteries: Once charging is complete, gently pull the battery(ies) out of the charging slot(s). Disconnect the charger from the power source when not in use.
- Using Batteries in Camera: Insert the charged battery into your compatible Sony camera according to the camera's manual.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the battery and charger. Do not use liquid cleaners or solvents. Ensure contacts are free of dust and debris.
- Storage: Store batteries and charger in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge batteries to about 50-60% capacity.
- Battery Care: Avoid completely discharging the battery, as this can reduce its lifespan. Recharge batteries regularly, even if not in frequent use.
7. Troubleshooting
- Problem: Battery not charging.
-
- Ensure the charger is properly connected to a working power source.
- Check if the battery is correctly inserted into the charger slot.
- Try a different USB cable or power adapter.
- Verify that the battery contacts and charger terminals are clean.
- Problem: Charger LCD display is off or not showing status.
-
- Confirm the charger is receiving power from the USB source.
- Ensure batteries are correctly inserted.
- If only one battery is inserted, check the corresponding slot.
- Problem: Battery not recognized by camera.
-
- Ensure the battery is fully charged.
- Remove and reinsert the battery into the camera.
- Clean the battery contacts on both the battery and the camera.
- Verify that your camera model is listed as compatible.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | K&F CONCEPT |
| Model Number | NP-FW50 |
| Battery Type | Lithium Ion |
| Battery Capacity | 1100mAh/Piece |
| Battery Rated Voltage | 7.4V |
| Battery Energy | 8.1Wh |
| Rechargeable | Yes |
| Charger Input Type | Type-C/Micro USB |
| Charger Input Voltage | 5V |
| Charger Input Current | 2.1A |
| Charger Output Energy | 8.4V 700mA (1 battery) | 8.4V 500mA (2 batteries) |
| Certifications | CE, FCC, RoHS |
| Package Weight | 0.097 kg |
9. User Tips
- Always double-check the compatibility list to ensure the battery works with your specific camera model before purchase.
- For optimal charging speed, use a power adapter that can deliver at least 2.1A output.
- Consider carrying a power bank for on-the-go charging, especially during extended photo shoots.
10. Warranty and Support
K&F Concept products are manufactured to high-quality standards. For warranty information, technical support, or any inquiries regarding your product, please refer to the official K&F Concept website or contact their customer service directly. Keep your purchase receipt as proof of purchase.