Ridstar S29 Pro

Contents

Ridstar S29 Pro Electric Bike User Manual

Model: S29 Pro

1. Introduction

Welcome to the Ridstar S29 Pro Electric Bike user manual. This guide provides essential information for the safe and efficient operation, assembly, and maintenance of your new electric bicycle. The Ridstar S29 Pro is designed for versatile riding across various terrains, featuring a powerful 1000W motor, a long-lasting 48V 15.6AH battery, and robust 29*2.1-inch tires.

Ridstar S29 Pro Electric Bike side view
Figure 1: Ridstar S29 Pro Electric Bike

Please read this manual thoroughly before your first ride to ensure proper usage and to maximize your riding experience.

2. Safety Information

⚠ Disclaimer:

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

  • Always wear a helmet and appropriate safety gear when riding.
  • Familiarize yourself with local laws and regulations regarding electric bicycles.
  • Perform a pre-ride safety check before each use, including brakes, tires, and battery level.
  • Do not operate the bike under the influence of alcohol or drugs.
  • Be aware of your surroundings and ride defensively.
  • Ensure the battery is securely locked in place before riding.

3. Package Contents

Upon unpacking, please ensure all items are present and undamaged:

  • Ridstar S29 Pro Electric Bike (partially assembled)
  • 48V 15.6AH Lithium Battery
  • Battery Charger
  • User Manual (this document)
  • Assembly Tools (may vary)
  • Pedals
  • Front and Rear Fenders
  • Rear Rack

4. Setup and Assembly

Your Ridstar S29 Pro Electric Bike comes partially assembled. Follow these steps to complete the assembly:

  1. Unpack the Bike: Carefully remove the bike and all components from the packaging.
  2. Install the Front Wheel: Attach the front wheel to the front fork, ensuring the disc brake rotor is correctly aligned with the caliper. Secure with the quick-release skewer or axle nuts.
  3. Install the Handlebars: Attach the handlebars to the stem, ensuring they are centered and tightened securely. Adjust the angle for comfortable riding.
  4. Install the Pedals: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Tighten them firmly.
  5. Install the Seat Post and Saddle: Insert the seat post into the frame and adjust the saddle height for comfortable pedaling. Secure with the quick-release clamp.
  6. Install Fenders and Rear Rack: Attach the front and rear fenders, and the rear rack using the provided screws and mounting points.
  7. Install the Battery: Insert the 48V 15.6AH battery into its designated slot on the frame and lock it securely with the key.
  8. Initial Charge: Before your first ride, fully charge the battery. Refer to the 'Charging the Battery' section for details.
  9. Pre-Ride Check: Before riding, ensure all bolts and quick releases are tightened, brakes are functioning, tires are inflated to the correct pressure, and the battery is charged.
Labeled diagram of Ridstar S29 Pro Electric Bike components
Figure 2: Key Components of the Ridstar S29 Pro Electric Bike. Labels include: Accelerator, Central control instrument, saddle, Tail light Turn signal, Double suspension front fork, Battery, 1000W Motor, Foot pedal, rear derailleur, Pressure disc, Disc brakes, Front light.

5. Operating Instructions

5.1 Powering On/Off

To power on the bike, press and hold the power button on the intelligent control instrument. To power off, press and hold the same button.

5.2 Intelligent Control Instrument

The LCD display provides crucial riding information:

  • Electricity: Shows current battery level.
  • Speed: Displays current riding speed.
  • Current Gear: Indicates the selected pedal-assist level or gear.
Intelligent Control Instrument display showing electricity, speed, and current gear
Figure 3: Intelligent Control Instrument. Displays Electricity, Speed, and Current Gear.

5.3 Riding Modes

The Ridstar S29 Pro offers three riding modes:

  1. Pure Electric Mode: Use the accelerator to propel the bike without pedaling.
  2. Pedal-Assist System (PAS) Mode: The motor provides assistance as you pedal. Adjust the assist level using the 'Power up/down' buttons on the handlebar.
  3. Manual Mode: Ride the bike like a traditional bicycle without motor assistance.

5.4 Gear Shifting (Shimano 21-speed)

The bike is equipped with a Shimano 21-speed gear system. Use the gear shifters on the handlebars to change gears according to terrain and desired effort. The 'Front gear key' controls the front derailleur, and the 'Rear gear key' controls the rear derailleur.

5.5 Braking System

The bike features front and rear mechanical disc brakes. Squeeze the brake handles on the handlebars to engage the brakes. Ensure brakes are tested before each ride.

5.6 Lights and Horn

The bike is equipped with a front headlight and a rear taillight for visibility. Use the dedicated buttons on the handlebar to turn them on/off. The horn button is also located on the handlebar.

Front headlight and rear taillight of the electric bike
Figure 4: Front Headlight and Rear Taillight for enhanced visibility.
Labeled diagram of handlebar controls
Figure 5: Handlebar Controls. Labels include: Rear gear key, LED controller, Power up/down button, Headlights, Horn, Front gear key, Brake handle, Accelerator.

5.7 Charging the Battery

The battery can be charged in two ways:

  1. Direct Charging: Plug the charger directly into the charging port on the bike frame.
  2. Detachable Charging: Remove the battery from the bike and charge it separately.

The charging time is approximately 5-7 hours. Always use the original charger provided.

Image showing two charging modes for the electric bike battery: direct charging and detachable charging
Figure 6: Two Charging Modes: Direct charging on the bike and detachable charging of the battery.

6. Maintenance

6.1 Battery Care

  • Charge the battery fully before first use.
  • Do not overcharge or completely drain the battery.
  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • If storing for extended periods, charge the battery to 50-70% every 2-3 months.
  • Refer to the safety disclaimer regarding potential fire risk during charging and storage.

6.2 Tire Maintenance

  • Regularly check tire pressure and inflate to the recommended PSI (usually found on the tire sidewall).
  • Inspect tires for wear, punctures, or damage before each ride.

6.3 Brake System

  • Regularly check brake pads for wear and replace if necessary.
  • Ensure brake levers are responsive and provide adequate stopping power. Adjust cable tension if needed.
  • Keep disc rotors clean and free from oil or grease.

6.4 Gear System

  • Keep the chain clean and lubricated for smooth shifting.
  • Periodically check the derailleur alignment and adjust if shifting becomes rough or inaccurate.

6.5 General Cleaning

  • Clean the bike regularly with a damp cloth. Avoid using high-pressure washers directly on electrical components.
  • Do not immerse the bike in water.
Close-up images of disc brakes and Shimano 21-speed derailleur
Figure 7: Detailed views of the mechanical disc brakes and Shimano 21-speed gear system.
Image of the buffer air hydraulic shock absorber on the front fork
Figure 8: Buffer Air Hydraulic Shock Absorber for a smoother ride.

7. Troubleshooting

This section addresses common issues you might encounter with your Ridstar S29 Pro Electric Bike.

  • Bike not powering on: Check if the battery is fully charged and properly seated. Ensure the power button is pressed and held correctly.
  • Motor not assisting: Verify the battery level. Ensure you are in PAS mode and pedaling, or using the accelerator in pure electric mode. Check for any error codes on the display.
  • Brakes feel weak: Inspect brake pads for wear. Check brake cable tension and adjust if necessary. Ensure disc rotors are clean.
  • Gears not shifting smoothly: Clean and lubricate the chain. Check for proper derailleur alignment and adjust if needed.
  • Reduced range: This can be due to low tire pressure, riding in higher assist modes, frequent stops and starts, or riding against strong headwinds. Ensure the battery is fully charged.

For issues not covered here, please contact customer support.

8. Specifications

FeatureDetail
BrandRidstar
ModelS29 Pro
Motor1000W Brushless Motor
Battery48V 15.6Ah Lithium Battery
Tires29*2.1 inch (non-slip, all-terrain)
Max Speed25km/h (default), 48km/h (after unlocking)
Range40-45km (pure electric mode), 50-60km (PAS mode)
BrakesMechanical Disc Brakes (front and rear)
Shock AbsorberFront Fork Shock Absorber (Buffer Air Hydraulic)
TransmissionShimano 21-speed
Climbing Slope30°
Max Load150kg
DisplayLCD Intelligent Control Instrument
LightsHeadlight, Taillight
Charging Time5-7 hours
Product Weight32kg
Product Dimensions (L x W x H)180 x 75 x 115cm
Diagram of 1000W brushless motor with performance metrics
Figure 9: Motor Performance. Top Speed: 25km/h, Max Torque: 80Nm, Climbing Slope: 30°.
Diagram of 48V 15.6AH battery capacity and performance
Figure 10: Battery Specifications. 48V 15.6A Battery, 60KM PAS Mode Range, 25KM/H Top Speed.
Product size diagram with labeled dimensions A through J
Figure 11: Product Dimensions. A: 180cm-70.8in, B: 115cm-45.2in, C: 56cm-22in, D: 37cm-14.5in, E: 107cm-42.1in, F: 57cm-22.4in, G: 73cm-28.7in, H: 85cm-33.4in, I: 100cm-39.3in, J: 70cm-27.5in.

9. User Tips

  • Unlock Speed for Off-Road Use: The bike's maximum speed can be unlocked to 48km/h for off-road riding. Always ensure this is done in compliance with local regulations and only in appropriate environments.
  • Optimize Range: To maximize battery range, utilize the Pedal-Assist System (PAS) mode more frequently than pure electric mode. Maintain proper tire pressure and avoid aggressive acceleration.
  • Regular Checks: A quick check of tire pressure, brake function, and battery charge before each ride can prevent many common issues and ensure a safer journey.

10. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your seller. For technical support or assistance with your Ridstar S29 Pro Electric Bike, please reach out to the customer service department of your retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.