Jonsbo ZB-360

Contents

JONSBO ZB-360 Computer Case Fan Instruction Manual

Model: ZB-360 Series | Brand: Jonsbo

1. Introduction

Thank you for choosing the JONSBO ZB-360 Computer Case Fan. This high-performance fan is designed to provide efficient cooling for your PC case or radiator, featuring a monolithic structure, PWM control for precise speed adjustment, and vibrant 5V 3PIN ARGB lighting for customizable aesthetics. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your fan.

JONSBO ZB-120/240/360 series fans with ARGB lighting, highlighting forward and reverse options.

JONSBO ZB-120/240/360 series fans with ARGB lighting, highlighting forward and reverse options.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact your retailer.

  • JONSBO ZB-360 Fan Unit (Forward or Reverse, Black or White)
  • Mounting Screws

3. Specifications

The JONSBO ZB-360 series offers both forward (W) and reverse (WR) blade configurations to optimize airflow within your system. Below are the detailed specifications:

JONSBO ZB-360 Series Fan Specifications
ParameterZB-360W (Forward)ZB-360WR (Reverse)
Fan Size362(L) * 123(W) * 28mm(H)
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume20.95-65.26 CFM18.75-47.71 CFM
Wind Pressure0.45-3.20 mmH2O0.33-1.66 mmH2O
Noise Level20.3-36.6 dB(A)16.4-30.7 dB(A)
Rated VoltageFAN DC12V, LED 5V
Rated CurrentFAN 0.55A, LED 1.35AFAN 0.35A, LED 1.35A
PowerFAN 6.60W, LED 6.75WFAN 4.20W, LED 6.75W
Fan BearingsHydraulic Bearings
Life (MTTF)≥20000h (Room Temp: 25 ℃)
InterfacePWM 4PIN, ARGB 3PIN
Blade Quantity7
Used ForCase, Radiator
Comprehensive specification parameters table for JONSBO ZB-120, ZB-240, and ZB-360 models.

Detailed specification parameters for ZB-120, ZB-240, and ZB-360 models.

Performance data for JONSBO PWM ARGB fans, showing noise, RPM, and airflow for both forward and reverse fan blades.

Performance data for JONSBO PWM ARGB fans, showing noise, RPM, and airflow for both forward and reverse fan blades.

4. Safety Information

  • Ensure your PC is powered off and unplugged before installation.
  • Handle the fan and its components with care to avoid damage.
  • Do not attempt to modify the fan or its wiring, as this may void the warranty and pose a safety risk.
  • Keep out of reach of children.

5. Installation and Setup

5.1. Fan Orientation (Forward vs. Reverse)

The JONSBO ZB-360 series offers both forward and reverse blade designs to allow for flexible airflow configurations within your PC case. Ensure you select the correct fan type for your desired airflow direction (intake or exhaust).

  • Forward Fan (ZB-360W): Typically used for intake, drawing air into the case.
  • Reverse Fan (ZB-360WR): Typically used for exhaust, pushing air out of the case, or for specific intake configurations where the aesthetic side needs to face inwards while still acting as intake.
Diagrams illustrating the positive light effect and air flow direction (inlet/outlet surfaces) for both standard and reverse fan blades.

Airflow direction for standard (forward) and reverse fan blades.

5.2. Physical Installation

  1. Identify the desired mounting location in your PC case or on your radiator.
  2. Align the fan unit with the screw holes. The ZB-360 features a combined fan gate light effect and a joint structure for easy installation.
  3. Secure the fan unit using the provided 4 screws. Do not overtighten.
Image showing the combined fan gate light effect and indicating easy installation with 4 screws.

Combined fan gate light effect and easy installation with 4 screws.

5.3. Wiring Connections

The JONSBO ZB-360 fan uses a simplified wiring system, connecting directly to your motherboard or a compatible controller.

  1. PWM 4PIN Connector: Connect the 4-pin PWM cable from the fan unit to an available 4-pin fan header on your motherboard. This allows for dynamic fan speed control.
  2. 5V 3PIN ARGB Connector: Connect the 3-pin ARGB cable from the fan unit to a 5V 3-pin Addressable RGB header on your motherboard or a dedicated ARGB controller. This enables synchronization of custom lighting effects. The 5V ARGB plug features male and female designs, allowing for series connection with other compatible ARGB devices.
Diagram illustrating the simplified wiring of the JONSBO ZB-360 fan, connecting directly to the motherboard.

Simplified wiring: One wire connects to the motherboard for easy setup.

Guide to using the ARGB light effect, showing motherboard synchronization with 3PIN ARGB and the design of 5V ARGB plug for series connection.

Guide to using the ARGB light effect with motherboard synchronization.

6. Operation

6.1. Fan Speed Control

The fan speed is controlled via the 4-pin PWM connection to your motherboard. You can adjust fan curves and speeds through your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV).

6.2. ARGB Lighting Control

The 5V 3PIN ARGB lighting can be synchronized with your motherboard's ARGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync). This allows for custom lighting effects with over 16 million colors, including the unique 'Frontal Thousand Layer Mirror' effect.

Visual representation of the 'Frontal Thousand Layer Mirror' light effect on the JONSBO ZB-360 fan.

The 'Frontal Thousand Layer Mirror' light effect.

7. Maintenance

Regular maintenance helps ensure optimal performance and extends the lifespan of your fan.

  • Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the fan is powered off and unplugged before cleaning.
  • Inspection: Check for any loose connections or obstructions around the fan blades.

8. Troubleshooting

  • Fan Not Spinning: Ensure the 4-pin PWM connector is securely plugged into the motherboard. Check BIOS settings to confirm fan headers are enabled and configured correctly.
  • ARGB Lights Not Working/Synchronizing: Verify the 5V 3PIN ARGB connector is correctly attached to a compatible header. Ensure your motherboard's ARGB software is installed and configured to detect and control the fan's lighting. Check for any physical damage to the ARGB cable.
  • Excessive Noise: Ensure the fan is securely mounted and not vibrating against the case. Check for any cables or obstructions hitting the fan blades. If noise persists, it may indicate a bearing issue; contact support.

9. User Tips

  • Airflow Optimization: Plan your case's airflow carefully. Use forward fans for intake and reverse fans for exhaust to create a positive or negative pressure system as desired, while maintaining a clean aesthetic.
  • Motherboard Compatibility: Always check your motherboard's manual for the location and type of fan headers (4-pin PWM and 5V 3-pin ARGB) to ensure compatibility before installation.
  • Cable Management: Route cables neatly to prevent them from interfering with fan blades or obstructing airflow.

10. Warranty and Support

JONSBO products are manufactured to high standards and undergo rigorous quality control. For warranty information and technical support, please refer to the warranty card included with your product or contact your point of purchase. Keep your proof of purchase for warranty claims.

© 2024 Jonsbo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.