Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EZVALO LED Mobile Phone Wireless Charging Bluetooth Speaker. This versatile device combines a creative night light, a Bluetooth speaker, and a wireless charging pad, designed to enhance your bedroom or living space.
Figure 1: Front view of the EZVALO LED Mobile Phone Wireless Charging Bluetooth Speaker.
Figure 2: Side view of the device.
Figure 3: Device in a typical home environment.
Product Features
- Multi-functional design: Combines LED night light, Bluetooth speaker, and wireless charger.
- Built-in 1800mAh battery for portable use.
- Three-speed touch dimming for adjustable lighting.
- 360° stereo surround sound via Bluetooth audio.
- Adjustable handle/light bar with 180° rotation.
Setup
1. Unpacking
Carefully remove all components from the packaging. Ensure the device and any included cables are present and undamaged.
Figure 4: Product packaging.
2. Power Connection
Connect the device to a 5V power source using a compatible USB cable (not explicitly mentioned if included, assume standard USB charging). The device has a built-in 1800mAh battery and can be used wirelessly once charged, but it is recommended to fully charge it before first use.
3. Initial Placement
Place the device on a stable, flat surface. Ensure there are no metallic objects between the wireless charging pad and your mobile phone when using the charging function.
Operating Instructions
1. LED Night Light Operation
The LED light features a touch-sensitive control for dimming. Locate the touch control area on the device (refer to Figure 5). Tap the control to cycle through three different brightness levels. Tap again to turn off the light.
Figure 5: Touch control for LED light.
The handle/light bar can be rotated 180 degrees to adjust the direction of the light or to serve as a phone stand (refer to Figure 6).
Figure 6: 180-degree rotation of the light bar.
2. Bluetooth Speaker Function
- Power On: Ensure the device is powered on.
- Pairing Mode: The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no device is connected. An audible prompt will indicate it's ready to pair.
- Connect Device: On your mobile phone or other Bluetooth-enabled device, search for "EZVALO LYYD02" (or similar name) in the Bluetooth settings. Select it to connect.
- Play Audio: Once connected, you can play audio from your device, and it will output through the EZVALO speaker.
The speaker provides 360° stereo surround sound for an immersive audio experience.
3. Wireless Charging
The top surface of the device features a wireless charging pad. To use this function:
- Ensure the EZVALO device is connected to a power source.
- Place your Qi-compatible mobile phone directly onto the center of the wireless charging pad (refer to Figure 7).
- The phone should indicate that it is charging. If not, adjust the phone's position on the pad.
Figure 7: Wireless charging in progress.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place when not in use for extended periods.
- Avoid Water: This device is not waterproof. Avoid exposure to water or excessive moisture.
- Handle with Care: Do not drop or subject the device to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery or no power connection. | Connect the device to a 5V power source and allow it to charge. Ensure the power adapter and cable are functioning correctly. |
| LED light does not respond to touch. | Device is off or touch sensor is obstructed/malfunctioning. | Ensure the device is powered on. Clean the touch control area. If the issue persists, try restarting the device. |
| Bluetooth speaker cannot connect. | Device not in pairing mode, or already connected to another device. | Ensure the speaker is powered on and in pairing mode. Disconnect from any previously paired devices. Check your phone's Bluetooth settings. |
| Wireless charging is not working. | Phone not Qi-compatible, misaligned, or foreign objects present. | Ensure your phone supports Qi wireless charging. Realign the phone on the charging pad. Remove any metallic objects or thick phone cases. Ensure the device is connected to a power source. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EZVALO |
| Model | LYYD02 |
| Voltage | 5V |
| Switch Mode | Touch |
| Product Dimensions (L x W x H) | 19.1 x 20.3 x 5.5 cm |
| Product Net Weight | 0.5 kg |
| Light Source Type | LED |
| Light Power | 10W |
| Input Power (Total) | <25 W |
| Battery Capacity | 1800mAh (Built-in) |
| Channels | 1 |
| Communication | Bluetooth, Induction (Wireless Charging) |
| Speaker Type | Portable |
| Cabinet Material | Plastic |
| Audio Crossover | Two-Way |
| Number of Loudspeaker Enclosures | 1 |
| Voice Control | No |
| Waterproof | No |
| App Support | No |
| Intelligent Personal Assistant | None |
User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface and not obstructed.
- When using the wireless charging feature, remove any thick phone cases or metallic attachments from your phone to ensure efficient charging.
- Utilize the 180° rotating handle to position the light exactly where you need it, or to prop up your phone for hands-free viewing while charging or listening to music.
- To conserve battery life, turn off the LED light and Bluetooth speaker when not in use.
Figure 8: Using the device as a phone stand.
Warranty and Support
This EZVALO product comes with a One Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
